This commit adds "interrupts" property to Tegra210/Tegra186/Tegra194
XUSB PADCTL node. XUSB PADCTL interrupt will be raised when USB wake
event happens. This is required for supporting XUSB host controller
ELPG.
Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
---
v4:
no change
v3:
no change
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 1 +
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 1 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 1 +
3 files changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 0c46ab7bbbf3..c5a82bccc6ff 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -685,6 +685,7 @@ padctl: padctl@3520000 {
reg = <0x0 0x03520000 0x0 0x1000>,
<0x0 0x03540000 0x0 0x1000>;
reg-names = "padctl", "ao";
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>;
reset-names = "padctl";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index e9c90f0f44ff..73bad615020a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -801,6 +801,7 @@ xusb_padctl: padctl@3520000 {
reg = <0x03520000 0x1000>,
<0x03540000 0x1000>;
reg-names = "padctl", "ao";
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>;
reset-names = "padctl";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 120b92d9b80b..26660aec730e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -1043,6 +1043,7 @@ padctl: padctl@7009f000 {
resets = <&tegra_car 142>;
reset-names = "padctl";
nvidia,pmc = <&tegra_pmc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
--
2.25.1
