Re: [PATCH 1/2] cx82310_eth: re-enable ethernet mode after router reboot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 12 October 2020, Jakub Kicinski wrote:
> On Sat, 10 Oct 2020 16:00:46 +0200 Ondrej Zary wrote:
> > When the router is rebooted without a power cycle, the USB device
> > remains connected but its configuration is reset. This results in
> > a non-working ethernet connection with messages like this in syslog:
> > 	usb 2-2: RX packet too long: 65535 B
> >
> > Re-enable ethernet mode when receiving a packet with invalid size of
> > 0xffff.
>
> Patch looks good, but could you explain what's a reboot without a power
> cycle in this case? The modem gets reset but USB subsystem doesn't know
> it and doesn't go though a unbind() + bind() cycle?

The router can be rebooted through the web interface. The reboot does not 
disconnect the USB device - it remains connected as if nothing happened. Only 
wrong data starts to come in.

-- 
Ondrej Zary



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux