From: Benjamin Berg <bberg@xxxxxxxxxx> Normal commands may be reporting that a connector has changed. Always call the usci_connector_change handler and let it take care of scheduling the work when needed. Doing this makes the ACPI code path identical to the CCG one. Cc: Hans de Goede <hdegoede@xxxxxxxxxx> Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> Signed-off-by: Benjamin Berg <bberg@xxxxxxxxxx> --- drivers/usb/typec/ucsi/ucsi_acpi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index fbfe8f5933af..04976435ad73 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -103,11 +103,12 @@ static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data) if (ret) return; + if (UCSI_CCI_CONNECTOR(cci)) + ucsi_connector_change(ua->ucsi, UCSI_CCI_CONNECTOR(cci)); + if (test_bit(COMMAND_PENDING, &ua->flags) && cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE)) complete(&ua->complete); - else if (UCSI_CCI_CONNECTOR(cci)) - ucsi_connector_change(ua->ucsi, UCSI_CCI_CONNECTOR(cci)); } static int ucsi_acpi_probe(struct platform_device *pdev) -- 2.26.2
