Implement tcpc.enable_frs to enable TCPC to receive
Fast role swap signal.
Additionally set the sink disconnect threshold to 4v
to prevent disconnect during Fast Role swap.
Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
Changes since v1:
- Changing patch version to v6 to fix version number confusion.
Changes since v6:
- Rebase on usb-next.
- Fixed formatting error.
- Added Reviewed-by: Heikki.
Changes since v7:
- Rebase on usb-next.
Changes since v8:
- None.
Changes since v9:
- None.
---
drivers/usb/typec/tcpm/tcpci.c | 17 +++++++++++++++++
drivers/usb/typec/tcpm/tcpci.h | 8 ++++++++
2 files changed, 25 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index d6a6fac82d48..f9f0af64da5f 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -268,6 +268,22 @@ static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable)
enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0);
}
+static int tcpci_enable_frs(struct tcpc_dev *dev, bool enable)
+{
+ struct tcpci *tcpci = tcpc_to_tcpci(dev);
+ int ret;
+
+ /* To prevent disconnect during FRS, set disconnect threshold to 3.5V */
+ ret = tcpci_write16(tcpci, TCPC_VBUS_SINK_DISCONNECT_THRESH, enable ? 0 : 0x8c);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_FAST_ROLE_SWAP_EN, enable ?
+ TCPC_FAST_ROLE_SWAP_EN : 0);
+
+ return ret;
+}
+
static int tcpci_set_bist_data(struct tcpc_dev *tcpc, bool enable)
{
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
@@ -611,6 +627,7 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
tcpci->tcpc.set_roles = tcpci_set_roles;
tcpci->tcpc.pd_transmit = tcpci_pd_transmit;
tcpci->tcpc.set_bist_data = tcpci_set_bist_data;
+ tcpci->tcpc.enable_frs = tcpci_enable_frs;
err = tcpci_parse_config(tcpci);
if (err < 0)
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
index 82f021a82456..5ef07a56d67a 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -16,6 +16,7 @@
#define TCPC_PD_INT_REV 0xa
#define TCPC_ALERT 0x10
+#define TCPC_ALERT_EXTND BIT(14)
#define TCPC_ALERT_EXTENDED_STATUS BIT(13)
#define TCPC_ALERT_VBUS_DISCNCT BIT(11)
#define TCPC_ALERT_RX_BUF_OVF BIT(10)
@@ -37,6 +38,9 @@
#define TCPC_EXTENDED_STATUS_MASK 0x16
#define TCPC_EXTENDED_STATUS_MASK_VSAFE0V BIT(0)
+#define TCPC_ALERT_EXTENDED_MASK 0x17
+#define TCPC_SINK_FAST_ROLE_SWAP BIT(0)
+
#define TCPC_CONFIG_STD_OUTPUT 0x18
#define TCPC_TCPC_CTRL 0x19
@@ -63,6 +67,7 @@
#define TCPC_POWER_CTRL 0x1c
#define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0)
+#define TCPC_FAST_ROLE_SWAP_EN BIT(7)
#define TCPC_CC_STATUS 0x1d
#define TCPC_CC_STATUS_TOGGLING BIT(5)
@@ -74,11 +79,14 @@
#define TCPC_POWER_STATUS 0x1e
#define TCPC_POWER_STATUS_UNINIT BIT(6)
+#define TCPC_POWER_STATUS_SOURCING_VBUS BIT(4)
#define TCPC_POWER_STATUS_VBUS_DET BIT(3)
#define TCPC_POWER_STATUS_VBUS_PRES BIT(2)
#define TCPC_FAULT_STATUS 0x1f
+#define TCPC_ALERT_EXTENDED 0x21
+
#define TCPC_COMMAND 0x23
#define TCPC_CMD_WAKE_I2C 0x11
#define TCPC_CMD_DISABLE_VBUS_DETECT 0x22
--
2.28.0.806.g8561365e88-goog
