[PATCH 3/4] MXC: Add support for ULPI Viewports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ARC USB OTG Core has support for accessing ULPI tranceivers
through so called ULPI viewports. Export a set of function for use with
the new xcvr framework.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Daniel Mack <daniel@xxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxx>
Cc: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
---
 arch/arm/plat-mxc/Kconfig             |    3 +
 arch/arm/plat-mxc/Makefile            |    1 +
 arch/arm/plat-mxc/include/mach/ulpi.h |    7 ++
 arch/arm/plat-mxc/ulpi.c              |  114 +++++++++++++++++++++++++++++++++
 4 files changed, 125 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-mxc/include/mach/ulpi.h
 create mode 100644 arch/arm/plat-mxc/ulpi.c

diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0617c19..5254670 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -53,6 +53,9 @@ config MXC_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MXC_ULPI
+	bool
+
 config ARCH_HAS_RNGA
 	bool
 	depends on ARCH_MXC
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index e3212c8..545412f 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
new file mode 100644
index 0000000..7b7db44
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_ULPI_H
+#define __MACH_ULPI_H
+
+extern struct usb_xcvr_access_ops mxc_ulpi_access_ops;
+
+#endif /* __MACH_ULPI_H */
+
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
new file mode 100644
index 0000000..e57b1f4
--- /dev/null
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/xcvr.h>
+
+#include <mach/ulpi.h>
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU		(1 << 31)	/* Wakeup */
+#define ULPIVW_RUN		(1 << 30)	/* read/write run */
+#define ULPIVW_WRITE		(1 << 29)	/* 0 = read  1 = write */
+#define ULPIVW_SS		(1 << 27)	/* SyncState */
+#define ULPIVW_PORT_MASK	0x07	/* Port field */
+#define ULPIVW_PORT_SHIFT	24
+#define ULPIVW_ADDR_MASK	0xff	/* data address field */
+#define ULPIVW_ADDR_SHIFT	16
+#define ULPIVW_RDATA_MASK	0xff	/* read data field */
+#define ULPIVW_RDATA_SHIFT	8
+#define ULPIVW_WDATA_MASK	0xff	/* write data field */
+#define ULPIVW_WDATA_SHIFT	0
+
+static int ulpi_poll(void __iomem *view, u32 bit)
+{
+	uint32_t data;
+	int timeout = 10000;
+
+	data = __raw_readl(view);
+	while (data & bit) {
+		if (!timeout--) {
+			printk(KERN_WARNING
+				"timeout polling for ULPI device\n");
+			return -ETIMEDOUT;
+		}
+
+		udelay(10);
+		data = __raw_readl(view);
+	}
+
+	return (data >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
+}
+
+static int ulpi_read(struct usb_xcvr *xcvr, u32 reg)
+{
+	int ret;
+	void __iomem *view = xcvr->access_priv;
+
+	/* make sure interface is running */
+	if (!(__raw_readl(view) && ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* read the register */
+	__raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
+
+	/* wait for completion */
+	return ulpi_poll(view, ULPIVW_RUN);
+}
+
+static int ulpi_write(struct usb_xcvr *xcvr, u32 val, u32 reg)
+{
+	int ret;
+	void __iomem *view = xcvr->access_priv;
+
+	/* make sure the interface is running */
+	if (!(__raw_readl(view) && ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret < 0)
+			return ret;
+	}
+
+	__raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
+		      (reg << ULPIVW_ADDR_SHIFT) |
+		      ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)),
+		     view);
+
+	/* wait for completion */
+	ret = ulpi_poll(view, ULPIVW_RUN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+struct usb_xcvr_access_ops mxc_ulpi_access_ops = {
+	.read	= ulpi_read,
+	.write	= ulpi_write,
+};
+
-- 
1.6.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux