[PATCH v3 3/5] usb: dwc3: qcom: Configure wakeup interrupts and set genpd active wakeup flag

[Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>]

Configure interrupts based on hs_phy_flag to avoid triggering of
interrupts during system suspend and suspends successfully.
Set genpd active wakeup flag for usb gdsc if wakeup capable devices
are connected so that wake up happens without reenumeration.

Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 74 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 59 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index c703d55..b6f36bd 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -17,9 +17,11 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_domain.h>
 #include <linux/usb/of.h>
 #include <linux/reset.h>
 #include <linux/iopoll.h>
+#include <linux/usb/hcd.h>
 
 #include "core.h"
 
@@ -293,19 +295,33 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
 
 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 {
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+
 	if (qcom->hs_phy_irq) {
 		disable_irq_wake(qcom->hs_phy_irq);
 		disable_irq_nosync(qcom->hs_phy_irq);
 	}
 
-	if (qcom->dp_hs_phy_irq) {
-		disable_irq_wake(qcom->dp_hs_phy_irq);
-		disable_irq_nosync(qcom->dp_hs_phy_irq);
-	}
+	if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_LS) {
+		if (qcom->dp_hs_phy_irq) {
+			disable_irq_wake(qcom->dp_hs_phy_irq);
+			disable_irq_nosync(qcom->dp_hs_phy_irq);
+		}
+	} else if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_HS) {
+		if (qcom->dm_hs_phy_irq) {
+			disable_irq_wake(qcom->dm_hs_phy_irq);
+			disable_irq_nosync(qcom->dm_hs_phy_irq);
+		}
+	} else {
+		if (qcom->dp_hs_phy_irq) {
+			disable_irq_wake(qcom->dp_hs_phy_irq);
+			disable_irq_nosync(qcom->dp_hs_phy_irq);
+		}
 
-	if (qcom->dm_hs_phy_irq) {
-		disable_irq_wake(qcom->dm_hs_phy_irq);
-		disable_irq_nosync(qcom->dm_hs_phy_irq);
+		if (qcom->dm_hs_phy_irq) {
+			disable_irq_wake(qcom->dm_hs_phy_irq);
+			disable_irq_nosync(qcom->dm_hs_phy_irq);
+		}
 	}
 
 	if (qcom->ss_phy_irq) {
@@ -316,19 +332,33 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 {
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+
 	if (qcom->hs_phy_irq) {
 		enable_irq(qcom->hs_phy_irq);
 		enable_irq_wake(qcom->hs_phy_irq);
 	}
 
-	if (qcom->dp_hs_phy_irq) {
-		enable_irq(qcom->dp_hs_phy_irq);
-		enable_irq_wake(qcom->dp_hs_phy_irq);
-	}
+	if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_LS) {
+		if (qcom->dp_hs_phy_irq) {
+			enable_irq(qcom->dp_hs_phy_irq);
+			enable_irq_wake(qcom->dp_hs_phy_irq);
+		}
+	} else if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_HS) {
+		if (qcom->dm_hs_phy_irq) {
+			enable_irq(qcom->dm_hs_phy_irq);
+			enable_irq_wake(qcom->dm_hs_phy_irq);
+		}
+	} else {
+		if (qcom->dp_hs_phy_irq) {
+			enable_irq(qcom->dp_hs_phy_irq);
+			enable_irq_wake(qcom->dp_hs_phy_irq);
+		}
 
-	if (qcom->dm_hs_phy_irq) {
-		enable_irq(qcom->dm_hs_phy_irq);
-		enable_irq_wake(qcom->dm_hs_phy_irq);
+		if (qcom->dm_hs_phy_irq) {
+			enable_irq(qcom->dm_hs_phy_irq);
+			enable_irq_wake(qcom->dm_hs_phy_irq);
+		}
 	}
 
 	if (qcom->ss_phy_irq) {
@@ -341,6 +371,15 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
 {
 	u32 val;
 	int i, ret;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct usb_hcd  *hcd;
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
+
+	if (dwc->xhci) {
+		hcd = platform_get_drvdata(dwc->xhci);
+		if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
+			genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP;
+	}
 
 	if (qcom->is_suspended)
 		return 0;
@@ -366,6 +405,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
 {
 	int ret;
 	int i;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
+
+	if (dwc->xhci)
+		genpd->flags &= ~GENPD_FLAG_ACTIVE_WAKEUP;
 
 	if (!qcom->is_suspended)
 		return 0;
@@ -764,7 +808,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	if (ret)
 		goto interconnect_exit;
 
-	device_init_wakeup(&pdev->dev, 1);
+	device_init_wakeup(&pdev->dev, of_property_read_bool(np, "wakeup-source"));
 	qcom->is_suspended = false;
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation