On Wed, 2020-09-23 at 08:47 +0000, Yoshihiro Shimoda wrote:
> Hi Chungeng,
>
> Thank you for the patch!
>
> > From: Chunfeng Yun, Sent: Monday, September 21, 2020 3:13 PM
> >
> > Use readl_poll_timeout_atomic() to simplify code
> >
> > Cc: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
> > Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > ---
> > v4: changes
> > 1. remove unnecessary parentheses suggested by Yoshihiro
> > 2. fix the wrong return value suggested by Yoshihiro & Daniel
> >
> > v2~v3: no changes
> > ---
> > drivers/usb/host/xhci-rcar.c | 43 ++++++++++++-------------------------------
> > 1 file changed, 12 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
> > index c1025d3..1bc4fe7 100644
> > --- a/drivers/usb/host/xhci-rcar.c
> > +++ b/drivers/usb/host/xhci-rcar.c
> > @@ -6,6 +6,7 @@
> > */
> >
> > #include <linux/firmware.h>
> > +#include <linux/iopoll.h>
> > #include <linux/module.h>
> > #include <linux/platform_device.h>
> > #include <linux/of.h>
> > @@ -127,8 +128,7 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
> > void __iomem *regs = hcd->regs;
> > struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
> > const struct firmware *fw;
> > - int retval, index, j, time;
> > - int timeout = 10000;
> > + int retval, index, j;
> > u32 data, val, temp;
> > u32 quirks = 0;
> > const struct soc_device_attribute *attr;
> > @@ -166,32 +166,19 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
> > temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
> > writel(temp, regs + RCAR_USB3_DL_CTRL);
> >
> > - for (time = 0; time < timeout; time++) {
> > - val = readl(regs + RCAR_USB3_DL_CTRL);
> > - if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
> > - break;
> > - udelay(1);
> > - }
> > - if (time == timeout) {
> > - retval = -ETIMEDOUT;
> > + retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
> > + val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
> > + 1, 10000);
> > + if (retval < 0)
> > break;
> > - }
> > }
> >
> > temp = readl(regs + RCAR_USB3_DL_CTRL);
> > temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
> > writel(temp, regs + RCAR_USB3_DL_CTRL);
> >
> > - for (time = 0; time < timeout; time++) {
> > - val = readl(regs + RCAR_USB3_DL_CTRL);
> > - if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
> > - retval = 0;
> > - break;
> > - }
> > - udelay(1);
> > - }
> > - if (time == timeout)
> > - retval = -ETIMEDOUT;
> > + retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
>
> We can also remove these unnecessary parentheses like below.
Ok, will remove it, thanks a lot
>
> + retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
>
> After fixed this:
>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
>
> Best regards,
> Yoshihiro Shimoda
>
