[PATCH v2 2/4] USB: cdc-acm: handle broken union descriptors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Handle broken union functional descriptors where the master-interface
doesn't exist or where its class is of neither Communication or Data
type (as required by the specification) by falling back to
"combined-interface" probing.

Note that this still allows for handling union descriptors with switched
interfaces.

This specifically makes the Whistler radio scanners TRX series devices
work with the driver without adding further quirks to the device-id
table.

Link: https://lore.kernel.org/r/5f4ca4f8.1c69fb81.a4487.0f5f@xxxxxxxxxxxxx
Reported-by: Daniel Caujolle-Bert <f1rmb.daniel@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
 drivers/usb/class/cdc-acm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e28ac640ff9c..f42ade505569 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1240,9 +1240,21 @@ static int acm_probe(struct usb_interface *intf,
 			}
 		}
 	} else {
+		int class = -1;
+
 		data_intf_num = union_header->bSlaveInterface0;
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+
+		if (control_interface)
+			class = control_interface->cur_altsetting->desc.bInterfaceClass;
+
+		if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
+			dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n");
+			combined_interfaces = 1;
+			control_interface = data_interface = intf;
+			goto look_for_collapsed_interface;
+		}
 	}
 
 	if (!control_interface || !data_interface) {
-- 
2.26.2




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux