Re: [PATCH v3 2/2] USB: PHY: JZ4770: Use the generic PHY framework.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Paul,

在 2020/9/16 上午6:47, Paul Cercueil 写道:
Hi Zhou,

Le dim. 13 sept. 2020 à 14:34, 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx> a écrit :
Used the generic PHY framework API to create the PHY,
and move the driver to driver/phy/ingenic. And adjust
the position of some codes to make it consistent with
the style of other USB PHY drivers.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@xxxxxxxxxxx>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---

Notes:
    v1->v2:
    Fix bug, ".of_match_table = of_match_ptr(ingenic_usb_phy_of_matches)" is wrong     and should be replaced with ".of_match_table = ingenic_usb_phy_of_matches".

    v2->v3:
    1.Change "depends on (MACH_INGENIC && MIPS) || COMPILE_TEST" to
      "depends on MIPS || COMPILE_TEST".
    2.Keep the adjustments of "ingenic_usb_phy_init()" and "ingenic_usb_phu_exit()"       positions in v2 to make them consistent with the order in "ingenic_usb_phy_ops",       keep the adjustments to the positions of "ingenic_usb_phy_of_matches[]" in v2       to keep them consistent with the styles of other USB PHY drivers. And remove       some unnecessary changes to reduce the diff size, from the original 256 lines
      change to the current 209 lines.

 drivers/phy/Kconfig                                |   1 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/ingenic/Kconfig                        |  12 ++
 drivers/phy/ingenic/Makefile                       |   2 +
 .../phy-jz4770.c => phy/ingenic/phy-ingenic-usb.c} | 209 +++++++++++----------
 drivers/usb/phy/Kconfig                            |   8 -
 drivers/usb/phy/Makefile                           |   1 -
 7 files changed, 128 insertions(+), 106 deletions(-)
 create mode 100644 drivers/phy/ingenic/Kconfig
 create mode 100644 drivers/phy/ingenic/Makefile
 rename drivers/{usb/phy/phy-jz4770.c => phy/ingenic/phy-ingenic-usb.c} (71%)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index de9362c25c07..0534b0fdd057 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -55,6 +55,7 @@ source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
 source "drivers/phy/freescale/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/ingenic/Kconfig"
 source "drivers/phy/lantiq/Kconfig"
 source "drivers/phy/marvell/Kconfig"
 source "drivers/phy/mediatek/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index c27408e4daae..ab24f0d20763 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -14,6 +14,7 @@ obj-y                    += allwinner/    \
                        cadence/    \
                        freescale/    \
                        hisilicon/    \
+                       ingenic/    \
                        intel/    \
                        lantiq/    \
                        marvell/    \
diff --git a/drivers/phy/ingenic/Kconfig b/drivers/phy/ingenic/Kconfig
new file mode 100644
index 000000000000..912b14e512cb
--- /dev/null
+++ b/drivers/phy/ingenic/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Ingenic platforms
+#
+config PHY_INGENIC_USB
+    tristate "Ingenic SoCs USB PHY Driver"
+    depends on MIPS || COMPILE_TEST
+    depends on USB_SUPPORT
+    select GENERIC_PHY
+    help
+      This driver provides USB PHY support for the USB controller found
+      on the JZ-series and X-series SoCs from Ingenic.
diff --git a/drivers/phy/ingenic/Makefile b/drivers/phy/ingenic/Makefile
new file mode 100644
index 000000000000..65d5ea00fc9d
--- /dev/null
+++ b/drivers/phy/ingenic/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y        += phy-ingenic-usb.o
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/phy/ingenic/phy-ingenic-usb.c
similarity index 71%
rename from drivers/usb/phy/phy-jz4770.c
rename to drivers/phy/ingenic/phy-ingenic-usb.c
index 4025da20b3fd..1f2e811c9125 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -7,12 +7,12 @@
  */

 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/phy.h>
+#include <linux/phy/phy.h>

 /* OTGPHY register offsets */
 #define REG_USBPCR_OFFSET            0x00
@@ -97,68 +97,56 @@ enum ingenic_usb_phy_version {
 struct ingenic_soc_info {
     enum ingenic_usb_phy_version version;

-    void (*usb_phy_init)(struct usb_phy *phy);
+    void (*usb_phy_init)(struct phy *phy);
 };

-struct jz4770_phy {
+struct ingenic_usb_phy {
     const struct ingenic_soc_info *soc_info;

-    struct usb_phy phy;
-    struct usb_otg otg;
+    struct phy *phy;
     struct device *dev;
     void __iomem *base;
     struct clk *clk;
     struct regulator *vcc_supply;
 };

-static inline struct jz4770_phy *otg_to_jz4770_phy(struct usb_otg *otg)
+static int ingenic_usb_phy_init(struct phy *phy)
 {
-    return container_of(otg, struct jz4770_phy, otg);
-}
-
-static inline struct jz4770_phy *phy_to_jz4770_phy(struct usb_phy *phy)
-{
-    return container_of(phy, struct jz4770_phy, phy);
-}
-
-static int ingenic_usb_phy_set_peripheral(struct usb_otg *otg,
-                     struct usb_gadget *gadget)
-{
-    struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+    int err;
     u32 reg;

-    if (priv->soc_info->version >= ID_X1000) {
-        reg = readl(priv->base + REG_USBPCR1_OFFSET);
-        reg |= USBPCR1_BVLD_REG;
-        writel(reg, priv->base + REG_USBPCR1_OFFSET);
+    err = clk_prepare_enable(priv->clk);
+    if (err) {
+        dev_err(priv->dev, "Unable to start clock: %d\n", err);
+        return err;
     }

+    priv->soc_info->usb_phy_init(phy);
+
+    /* Wait for PHY to reset */
+    usleep_range(30, 300);
     reg = readl(priv->base + REG_USBPCR_OFFSET);
-    reg &= ~USBPCR_USB_MODE;
-    reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
-    writel(reg, priv->base + REG_USBPCR_OFFSET);
+    writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
+    usleep_range(300, 1000);

     return 0;
 }

-static int ingenic_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+static int ingenic_usb_phy_exit(struct phy *phy)
 {
-    struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
-    u32 reg;
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);

-    reg = readl(priv->base + REG_USBPCR_OFFSET);
-    reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
-    reg |= USBPCR_USB_MODE;
-    writel(reg, priv->base + REG_USBPCR_OFFSET);
+    clk_disable_unprepare(priv->clk);
+    regulator_disable(priv->vcc_supply);

     return 0;
 }

That part is still messy. You remove ingenic_usb_phy_set_peripheral() and ingenic_usb_phy_set_host(), then add ingenic_usb_phy_init() and ingenic_usb_phy_exit(). Why were the two first functions removed? Just keep these around, and call them from ingenic_usb_phy_set_mode(). That will automatically make the diff much smaller.

And by making the diff smaller, we can spot the actual differences. Like how support for PHY_MODE_USB_OTG was added, without any notice.


Indeed, after following your suggestion, the diff can be reduced a lot. I was too entangled in trying to be consistent with the order and style in orther phy drivers. :(


-static int ingenic_usb_phy_init(struct usb_phy *phy)
+static int ingenic_usb_phy_power_on(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     int err;
-    u32 reg;

     err = regulator_enable(priv->vcc_supply);
     if (err) {
@@ -166,39 +154,71 @@ static int ingenic_usb_phy_init(struct usb_phy *phy)
         return err;
     }

-    err = clk_prepare_enable(priv->clk);
-    if (err) {
-        dev_err(priv->dev, "Unable to start clock: %d\n", err);
-        return err;
-    }
-
-    priv->soc_info->usb_phy_init(phy);
-
-    /* Wait for PHY to reset */
-    usleep_range(30, 300);
-    reg = readl(priv->base + REG_USBPCR_OFFSET);
-    writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
-    usleep_range(300, 1000);
-
     return 0;
 }

-static void ingenic_usb_phy_shutdown(struct usb_phy *phy)
+static int ingenic_usb_phy_power_off(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);

-    clk_disable_unprepare(priv->clk);
     regulator_disable(priv->vcc_supply);
+
+    return 0;
 }

-static void ingenic_usb_phy_remove(void *phy)
+static int ingenic_usb_phy_set_mode(struct phy *phy,
+                  enum phy_mode mode, int submode)
 {
-    usb_remove_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+    u32 reg;
+
+    switch (mode) {
+    case PHY_MODE_USB_HOST:
+        reg = readl(priv->base + REG_USBPCR_OFFSET);
+        reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
+        reg |= USBPCR_USB_MODE;
+        writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+        break;
+    case PHY_MODE_USB_DEVICE:
+        if (priv->soc_info->version >= ID_X1000) {
+            reg = readl(priv->base + REG_USBPCR1_OFFSET);
+            reg |= USBPCR1_BVLD_REG;
+            writel(reg, priv->base + REG_USBPCR1_OFFSET);
+        }
+
+        reg = readl(priv->base + REG_USBPCR_OFFSET);
+        reg &= ~USBPCR_USB_MODE;
+        reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
+        writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+        break;
+    case PHY_MODE_USB_OTG:
+        reg = readl(priv->base + REG_USBPCR_OFFSET);
+        reg &= ~USBPCR_OTG_DISABLE;
+        reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_USB_MODE;
+        writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+        break;
+    default:
+        return -EINVAL;
+    }
+
+    return 0;
 }

-static void jz4770_usb_phy_init(struct usb_phy *phy)
+static const struct phy_ops ingenic_usb_phy_ops = {
+    .init        = ingenic_usb_phy_init,
+    .exit        = ingenic_usb_phy_exit,
+    .power_on    = ingenic_usb_phy_power_on,
+    .power_off    = ingenic_usb_phy_power_off,
+    .set_mode    = ingenic_usb_phy_set_mode,
+    .owner        = THIS_MODULE,
+};
+
+static void jz4770_usb_phy_init(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     u32 reg;

     reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
@@ -208,9 +228,9 @@ static void jz4770_usb_phy_init(struct usb_phy *phy)
     writel(reg, priv->base + REG_USBPCR_OFFSET);
 }

-static void jz4780_usb_phy_init(struct usb_phy *phy)
+static void jz4780_usb_phy_init(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     u32 reg;

     reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
@@ -221,9 +241,9 @@ static void jz4780_usb_phy_init(struct usb_phy *phy)
     writel(reg, priv->base + REG_USBPCR_OFFSET);
 }

-static void x1000_usb_phy_init(struct usb_phy *phy)
+static void x1000_usb_phy_init(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     u32 reg;

     reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT;
@@ -235,9 +255,9 @@ static void x1000_usb_phy_init(struct usb_phy *phy)
     writel(reg, priv->base + REG_USBPCR_OFFSET);
 }

-static void x1830_usb_phy_init(struct usb_phy *phy)
+static void x1830_usb_phy_init(struct phy *phy)
 {
-    struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+    struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
     u32 reg;

     /* rdt */
@@ -276,43 +296,25 @@ static const struct ingenic_soc_info x1830_soc_info = {
     .usb_phy_init = x1830_usb_phy_init,
 };

-static const struct of_device_id ingenic_usb_phy_of_matches[] = {
-    { .compatible = "ingenic,jz4770-phy", .data = &jz4770_soc_info },
-    { .compatible = "ingenic,jz4780-phy", .data = &jz4780_soc_info },
-    { .compatible = "ingenic,x1000-phy", .data = &x1000_soc_info },
-    { .compatible = "ingenic,x1830-phy", .data = &x1830_soc_info },
-    { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);

Why move that array?


This is the same as before, too entangled in keeping consistent with the order in other phy drivers :(

-
-static int jz4770_phy_probe(struct platform_device *pdev)
+static int ingenic_usb_phy_probe(struct platform_device *pdev)
 {
+    struct ingenic_usb_phy *priv;
+    struct phy_provider *provider;
     struct device *dev = &pdev->dev;
-    struct jz4770_phy *priv;
     int err;

     priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
     if (!priv)
         return -ENOMEM;

-    priv->soc_info = device_get_match_data(&pdev->dev);
+    priv->soc_info = device_get_match_data(dev);
     if (!priv->soc_info) {
-        dev_err(&pdev->dev, "Error: No device match found\n");
+        dev_err(dev, "Error: No device match found\n");
         return -ENODEV;
     }

     platform_set_drvdata(pdev, priv);
     priv->dev = dev;
-    priv->phy.dev = dev;
-    priv->phy.otg = &priv->otg;
-    priv->phy.label = "ingenic-usb-phy";
-    priv->phy.init = ingenic_usb_phy_init;
-    priv->phy.shutdown = ingenic_usb_phy_shutdown;
-
-    priv->otg.state = OTG_STATE_UNDEFINED;
-    priv->otg.usb_phy = &priv->phy;
-    priv->otg.set_host = ingenic_usb_phy_set_host;
-    priv->otg.set_peripheral = ingenic_usb_phy_set_peripheral;

     priv->base = devm_platform_ioremap_resource(pdev, 0);
     if (IS_ERR(priv->base)) {
@@ -336,27 +338,40 @@ static int jz4770_phy_probe(struct platform_device *pdev)
         return err;
     }

-    err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
-    if (err) {
-        if (err != -EPROBE_DEFER)
-            dev_err(dev, "Unable to register PHY\n");
-        return err;
-    }
+    priv->phy = devm_phy_create(priv->dev, NULL, &ingenic_usb_phy_ops);

You can use 'dev' directly.


Sure.

+    if (IS_ERR(priv))
+        return PTR_ERR(priv);
+
+    phy_set_drvdata(priv->phy, priv);

-    return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy); +    provider = devm_of_phy_provider_register(priv->dev, of_phy_simple_xlate);
+    if (IS_ERR(provider))
+        return PTR_ERR(provider);
+
+    return 0;

return demv_of_phy_provider_register(dev, ...)


Sure.

 }

-static struct platform_driver ingenic_phy_driver = {
-    .probe        = jz4770_phy_probe,
+static const struct of_device_id ingenic_usb_phy_of_matches[] = {
+    { .compatible = "ingenic,jz4770-phy", .data = &jz4770_soc_info },
+    { .compatible = "ingenic,jz4780-phy", .data = &jz4780_soc_info },
+    { .compatible = "ingenic,x1000-phy", .data = &x1000_soc_info },
+    { .compatible = "ingenic,x1830-phy", .data = &x1830_soc_info },
+    { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);
+
+static struct platform_driver ingenic_usb_phy_driver = {
+    .probe        = ingenic_usb_phy_probe,
     .driver        = {
-        .name    = "jz4770-phy",
+        .name    = "ingenic-usb-phy",
         .of_match_table = ingenic_usb_phy_of_matches,
     },
 };
-module_platform_driver(ingenic_phy_driver);
+module_platform_driver(ingenic_usb_phy_driver);

 MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>");
 MODULE_AUTHOR("漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>");
 MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
 MODULE_DESCRIPTION("Ingenic SoCs USB PHY driver");
+MODULE_ALIAS("jz4770-phy");

So I first thought this generic PHY driver would be a drop-in replacement for the old jz4770-phy driver, that's why I suggested to add the jz4770-phy alias. But it turns out that it's a completely different framework, so we can drop the alias.

That also means that this patch, without any change to the JZ4740 MUSB driver, breaks USB on all Ingenic SoCs I can test with.

So unless you have a patch to the jz4740-musb driver in this series, you can't remove the old jz4770-phy driver yet. Just modify this patch so that the new generic-PHY driver is added, without removing the old one. It will be much easier to review (one new driver vs lots of +/- lines) and you can move the code around if you want to. Then when the jz4740-musb driver is modified to use the generic PHY framework, the old jz4770-phy driver can be "retired".


Sure, this also just solves the problem of order and style that I entangled before.

Thanks and best regards!

Cheers,
-Paul

 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index ef4787cd3d37..ff24fca0a2d9 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -184,12 +184,4 @@ config USB_ULPI_VIEWPORT
       Provides read/write operations to the ULPI phy register set for
       controllers with a viewport register (e.g. Chipidea/ARC controllers).

-config JZ4770_PHY
-    tristate "Ingenic SoCs Transceiver Driver"
-    depends on MIPS || COMPILE_TEST
-    select USB_PHY
-    help
-      This driver provides PHY support for the USB controller found
-      on the JZ-series and X-series SoCs from Ingenic.
-
 endmenu
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b352bdbe8712..df1d99010079 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -24,4 +24,3 @@ obj-$(CONFIG_USB_MXS_PHY)        += phy-mxs-usb.o
 obj-$(CONFIG_USB_ULPI)            += phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)        += phy-ulpi-viewport.o
 obj-$(CONFIG_KEYSTONE_USB_PHY)        += phy-keystone.o
-obj-$(CONFIG_JZ4770_PHY)        += phy-jz4770.o
--
2.11.0





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux