On Tue 15 Sep 14:31 CDT 2020, Matthias Kaehlcke wrote:
> The dwc3-qcom currently enables wakeup interrupts unconditionally
> when suspending, however this should not be done when wakeup is
> disabled (e.g. through the sysfs attribute power/wakeup). Only
> enable wakeup interrupts when device_may_wakeup() returns true.
>
> Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
>
> drivers/usb/dwc3/dwc3-qcom.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index e1e78e9824b1..56d14c09506d 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -251,8 +251,10 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
> for (i = qcom->num_clocks - 1; i >= 0; i--)
> clk_disable_unprepare(qcom->clks[i]);
>
> + if (device_may_wakeup(qcom->dev))
> + dwc3_qcom_enable_interrupts(qcom);
> +
> qcom->is_suspended = true;
> - dwc3_qcom_enable_interrupts(qcom);
>
> return 0;
> }
> @@ -265,7 +267,8 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
> if (!qcom->is_suspended)
> return 0;
>
> - dwc3_qcom_disable_interrupts(qcom);
> + if (device_may_wakeup(qcom->dev))
> + dwc3_qcom_disable_interrupts(qcom);
>
> for (i = 0; i < qcom->num_clocks; i++) {
> ret = clk_prepare_enable(qcom->clks[i]);
> --
> 2.28.0.618.gf4bc123cb7-goog
>
