On Mon, Aug 31, 2020 at 07:59:24PM -0700, Badhri Jagan Sridharan wrote:
> Upon receiving ALERT_EXTENDED.TCPC_SINK_FAST_ROLE_SWAP signal
> tcpm to start Sink fast role swap signal.
>
> Inform when TCPM is sourcing vbus.
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> ---
> Changes since v1:
> - Changing patch version to v6 to fix version number confusion.
> ---
> drivers/usb/typec/tcpm/tcpci_maxim.c | 50 +++++++++++++++++++++++++---
> 1 file changed, 46 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
> index b61f290a8f96..6ba808ad901a 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim.c
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
> @@ -106,13 +106,22 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
> return;
> }
>
> + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, 0xff);
> + if (ret < 0) {
> + dev_err(chip->dev, "Unable to clear TCPC_ALERT_EXTENDED ret:%d\n", ret);
> + return;
> + }
> +
> alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED |
> TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS |
> - TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS;
> + TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS |
> + /* Enable Extended alert for detecting Fast Role Swap Signal */
> + TCPC_ALERT_EXTND;
>
> ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask);
> if (ret < 0) {
> - dev_err(chip->dev, "Error writing to TCPC_ALERT_MASK ret:%d\n", ret);
> + dev_err(chip->dev,
> + "Error enabling TCPC_ALERT: TCPC_ALERT_MASK write failed ret:%d\n", ret);
> return;
> }
>
> @@ -122,6 +131,10 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
> dev_err(chip->dev, "Error writing to TCPC_POWER_CTRL ret:%d\n", ret);
> return;
> }
> +
> + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED_MASK, TCPC_SINK_FAST_ROLE_SWAP);
> + if (ret < 0)
> + return;
> }
>
> static void process_rx(struct max_tcpci_chip *chip, u16 status)
> @@ -225,10 +238,23 @@ static void process_power_status(struct max_tcpci_chip *chip)
> if (ret < 0)
> return;
>
> - if (pwr_status == 0xff)
> + if (pwr_status == 0xff) {
> max_tcpci_init_regs(chip);
> - else
> + } else if (pwr_status & TCPC_POWER_STATUS_SOURCING_VBUS) {
> + tcpm_sourcing_vbus(chip->port);
> + /*
> + * Alawys re-enable boost here.
> + * In normal case, when say an headset is attached, TCPM would
> + * have instructed to TCPC to enable boost, so the call is a
> + * no-op.
> + * But for Fast Role Swap case, Boost turns on autonomously without
> + * AP intervention, but, needs AP to enable source mode explicitly
> + * for AP to regain control.
> + */
> + max_tcpci_set_vbus(chip->tcpci, &chip->data, true, false);
> + } else {
> tcpm_vbus_change(chip->port);
> + }
> }
>
> static void process_tx(struct max_tcpci_chip *chip, u16 status)
> @@ -249,6 +275,7 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
> {
> u16 mask;
> int ret;
> + u8 reg_status;
>
> /*
> * Clear alert status for everything except RX_STATUS, which shouldn't
> @@ -274,6 +301,21 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
> }
> }
>
> + if (status & TCPC_ALERT_EXTND) {
> + ret = max_tcpci_read8(chip, TCPC_ALERT_EXTENDED, ®_status);
> + if (ret < 0)
> + return ret;
> +
> + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, reg_status);
> + if (ret < 0)
> + return ret;
> +
> + if (reg_status & TCPC_SINK_FAST_ROLE_SWAP) {
> + dev_info(chip->dev, "FRS Signal");
> + tcpm_sink_frs(chip->port);
> + }
> + }
> +
> if (status & TCPC_ALERT_RX_STATUS)
> process_rx(chip, status);
>
> --
> 2.28.0.402.g5ffc5be6b7-goog
--
heikki
