Neil Armstrong <narmstrong@xxxxxxxxxxxx> writes: > The Amlogic AXG is close from the GXL Glue but with a single OTG PHY. minor grammar nit: s/close from/close to/ (also in patches 2 & 3). Otherwise.. Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxxxx> Kevin > It needs the same init sequence as GXL & GXM, but it seems it doesn't need > the host disconnect bit. > > The Glue driver reuses the already implemented GXL & GXM work. > > The USB2 PHY driver needs a slight tweak to keep the OTG detection working. > > Neil Armstrong (5): > phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode > dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG > Families USB Glue Bindings > usb: dwc-meson-g12a: Add support for USB on AXG SoCs > arm64: dts: meson-axg: add USB nodes > arm64: dts: meson-axg-s400: enable USB OTG > > .../usb/amlogic,meson-g12a-usb-ctrl.yaml | 22 +++++++- > .../arm64/boot/dts/amlogic/meson-axg-s400.dts | 10 ++++ > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 51 +++++++++++++++++++ > drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 +- > drivers/usb/dwc3/dwc3-meson-g12a.c | 17 +++++++ > 5 files changed, 101 insertions(+), 2 deletions(-) > > -- > 2.22.0
