Used the generic PHY framework API to create the PHY,
and move the driver to driver/phy/ingenic.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@xxxxxxxxxxx>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---
Notes:
v1->v2:
Fix bug, ".of_match_table = of_match_ptr(ingenic_usb_phy_of_matches)" is wrong
and should be replaced with ".of_match_table = ingenic_usb_phy_of_matches".
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/ingenic/Kconfig | 12 +
drivers/phy/ingenic/Makefile | 2 +
.../phy-jz4770.c => phy/ingenic/phy-ingenic-usb.c} | 256 ++++++++++++---------
drivers/usb/phy/Kconfig | 8 -
drivers/usb/phy/Makefile | 1 -
7 files changed, 165 insertions(+), 116 deletions(-)
create mode 100644 drivers/phy/ingenic/Kconfig
create mode 100644 drivers/phy/ingenic/Makefile
rename drivers/{usb/phy/phy-jz4770.c => phy/ingenic/phy-ingenic-usb.c} (63%)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index de9362c25c07..0534b0fdd057 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -55,6 +55,7 @@ source "drivers/phy/broadcom/Kconfig"
source "drivers/phy/cadence/Kconfig"
source "drivers/phy/freescale/Kconfig"
source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/ingenic/Kconfig"
source "drivers/phy/lantiq/Kconfig"
source "drivers/phy/marvell/Kconfig"
source "drivers/phy/mediatek/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index c27408e4daae..ab24f0d20763 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -14,6 +14,7 @@ obj-y += allwinner/ \
cadence/ \
freescale/ \
hisilicon/ \
+ ingenic/ \
intel/ \
lantiq/ \
marvell/ \
diff --git a/drivers/phy/ingenic/Kconfig b/drivers/phy/ingenic/Kconfig
new file mode 100644
index 000000000000..b9581eae89dd
--- /dev/null
+++ b/drivers/phy/ingenic/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Ingenic platforms
+#
+config PHY_INGENIC_USB
+ tristate "Ingenic SoCs USB PHY Driver"
+ depends on (MACH_INGENIC && MIPS) || COMPILE_TEST
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ help
+ This driver provides USB PHY support for the USB controller found
+ on the JZ-series and X-series SoCs from Ingenic.
diff --git a/drivers/phy/ingenic/Makefile b/drivers/phy/ingenic/Makefile
new file mode 100644
index 000000000000..65d5ea00fc9d
--- /dev/null
+++ b/drivers/phy/ingenic/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += phy-ingenic-usb.o
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/phy/ingenic/phy-ingenic-usb.c
similarity index 63%
rename from drivers/usb/phy/phy-jz4770.c
rename to drivers/phy/ingenic/phy-ingenic-usb.c
index f6d3731581eb..86a95b498785 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -7,12 +7,12 @@
*/
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
/* OTGPHY register offsets */
#define REG_USBPCR_OFFSET 0x00
@@ -97,68 +97,49 @@ enum ingenic_usb_phy_version {
struct ingenic_soc_info {
enum ingenic_usb_phy_version version;
- void (*usb_phy_init)(struct usb_phy *phy);
+ void (*usb_phy_init)(struct phy *phy);
};
-struct jz4770_phy {
+struct ingenic_usb_phy {
const struct ingenic_soc_info *soc_info;
- struct usb_phy phy;
- struct usb_otg otg;
+ struct phy *phy;
struct device *dev;
void __iomem *base;
struct clk *clk;
struct regulator *vcc_supply;
};
-static inline struct jz4770_phy *otg_to_jz4770_phy(struct usb_otg *otg)
+static int ingenic_usb_phy_init(struct phy *phy)
{
- return container_of(otg, struct jz4770_phy, otg);
-}
-
-static inline struct jz4770_phy *phy_to_jz4770_phy(struct usb_phy *phy)
-{
- return container_of(phy, struct jz4770_phy, phy);
-}
-
-static int ingenic_usb_phy_set_peripheral(struct usb_otg *otg,
- struct usb_gadget *gadget)
-{
- struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
- u32 reg;
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ int err;
- if (priv->soc_info->version >= ID_X1000) {
- reg = readl(priv->base + REG_USBPCR1_OFFSET);
- reg |= USBPCR1_BVLD_REG;
- writel(reg, priv->base + REG_USBPCR1_OFFSET);
+ err = clk_prepare_enable(priv->clk);
+ if (err) {
+ dev_err(priv->dev, "Unable to start clock: %d\n", err);
+ return err;
}
- reg = readl(priv->base + REG_USBPCR_OFFSET);
- reg &= ~USBPCR_USB_MODE;
- reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
- writel(reg, priv->base + REG_USBPCR_OFFSET);
+ priv->soc_info->usb_phy_init(phy);
return 0;
}
-static int ingenic_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+static int ingenic_usb_phy_exit(struct phy *phy)
{
- struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
- u32 reg;
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
- reg = readl(priv->base + REG_USBPCR_OFFSET);
- reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
- reg |= USBPCR_USB_MODE;
- writel(reg, priv->base + REG_USBPCR_OFFSET);
+ clk_disable_unprepare(priv->clk);
+ regulator_disable(priv->vcc_supply);
return 0;
}
-static int ingenic_usb_phy_init(struct usb_phy *phy)
+static int ingenic_usb_phy_power_on(struct phy *phy)
{
- struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
int err;
- u32 reg;
err = regulator_enable(priv->vcc_supply);
if (err) {
@@ -166,39 +147,71 @@ static int ingenic_usb_phy_init(struct usb_phy *phy)
return err;
}
- err = clk_prepare_enable(priv->clk);
- if (err) {
- dev_err(priv->dev, "Unable to start clock: %d\n", err);
- return err;
- }
-
- priv->soc_info->usb_phy_init(phy);
-
- /* Wait for PHY to reset */
- usleep_range(30, 300);
- reg = readl(priv->base + REG_USBPCR_OFFSET);
- writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
- usleep_range(300, 1000);
-
return 0;
}
-static void ingenic_usb_phy_shutdown(struct usb_phy *phy)
+static int ingenic_usb_phy_power_off(struct phy *phy)
{
- struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
- clk_disable_unprepare(priv->clk);
regulator_disable(priv->vcc_supply);
+
+ return 0;
}
-static void ingenic_usb_phy_remove(void *phy)
+static int ingenic_usb_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
{
- usb_remove_phy(phy);
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
+ reg |= USBPCR_USB_MODE;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ break;
+ case PHY_MODE_USB_DEVICE:
+ if (priv->soc_info->version >= ID_X1000) {
+ reg = readl(priv->base + REG_USBPCR1_OFFSET);
+ reg |= USBPCR1_BVLD_REG;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+ }
+
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ reg &= ~USBPCR_USB_MODE;
+ reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ break;
+ case PHY_MODE_USB_OTG:
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ reg &= ~USBPCR_OTG_DISABLE;
+ reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_USB_MODE;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
}
-static void jz4770_usb_phy_init(struct usb_phy *phy)
+static const struct phy_ops ingenic_usb_phy_ops = {
+ .init = ingenic_usb_phy_init,
+ .exit = ingenic_usb_phy_exit,
+ .power_on = ingenic_usb_phy_power_on,
+ .power_off = ingenic_usb_phy_power_off,
+ .set_mode = ingenic_usb_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static void jz4770_usb_phy_init(struct phy *phy)
{
- struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
@@ -206,11 +219,16 @@ static void jz4770_usb_phy_init(struct usb_phy *phy)
USBPCR_TXFSLSTUNE_DFT | USBPCR_TXRISETUNE_DFT | USBPCR_TXVREFTUNE_DFT |
USBPCR_POR;
writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ /* Wait for PHY to reset */
+ usleep_range(30, 300);
+ writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
+ usleep_range(300, 1000);
}
-static void jz4780_usb_phy_init(struct usb_phy *phy)
+static void jz4780_usb_phy_init(struct phy *phy)
{
- struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
@@ -219,11 +237,16 @@ static void jz4780_usb_phy_init(struct usb_phy *phy)
reg = USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR;
writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ /* Wait for PHY to reset */
+ usleep_range(30, 300);
+ writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
+ usleep_range(300, 1000);
}
-static void x1000_usb_phy_init(struct usb_phy *phy)
+static void x1000_usb_phy_init(struct phy *phy)
{
- struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT;
@@ -233,11 +256,16 @@ static void x1000_usb_phy_init(struct usb_phy *phy)
USBPCR_TXHSXVTUNE_DCR_15MV | USBPCR_TXVREFTUNE_INC_25PPT |
USBPCR_COMMONONN | USBPCR_POR;
writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ /* Wait for PHY to reset */
+ usleep_range(30, 300);
+ writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
+ usleep_range(300, 1000);
}
-static void x1830_usb_phy_init(struct usb_phy *phy)
+static void x1830_usb_phy_init(struct phy *phy)
{
- struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
u32 reg;
/* rdt */
@@ -250,6 +278,11 @@ static void x1830_usb_phy_init(struct usb_phy *phy)
reg = USBPCR_IDPULLUP_OTG | USBPCR_VBUSVLDEXT | USBPCR_TXPREEMPHTUNE |
USBPCR_COMMONONN | USBPCR_POR;
writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ /* Wait for PHY to reset */
+ usleep_range(30, 300);
+ writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
+ usleep_range(300, 1000);
}
static const struct ingenic_soc_info jz4770_soc_info = {
@@ -276,87 +309,96 @@ static const struct ingenic_soc_info x1830_soc_info = {
.usb_phy_init = x1830_usb_phy_init,
};
-static const struct of_device_id ingenic_usb_phy_of_matches[] = {
- { .compatible = "ingenic,jz4770-phy", .data = &jz4770_soc_info },
- { .compatible = "ingenic,jz4780-phy", .data = &jz4780_soc_info },
- { .compatible = "ingenic,x1000-phy", .data = &x1000_soc_info },
- { .compatible = "ingenic,x1830-phy", .data = &x1830_soc_info },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);
-
-static int jz4770_phy_probe(struct platform_device *pdev)
+static int ingenic_usb_phy_probe(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct jz4770_phy *priv;
+ struct ingenic_usb_phy *priv;
+ struct phy_provider *provider;
int err;
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ priv->dev = &pdev->dev;
+
priv->soc_info = device_get_match_data(&pdev->dev);
if (!priv->soc_info) {
dev_err(&pdev->dev, "Error: No device match found\n");
return -ENODEV;
}
- platform_set_drvdata(pdev, priv);
- priv->dev = dev;
- priv->phy.dev = dev;
- priv->phy.otg = &priv->otg;
- priv->phy.label = "ingenic-usb-phy";
- priv->phy.init = ingenic_usb_phy_init;
- priv->phy.shutdown = ingenic_usb_phy_shutdown;
-
- priv->otg.state = OTG_STATE_UNDEFINED;
- priv->otg.usb_phy = &priv->phy;
- priv->otg.set_host = ingenic_usb_phy_set_host;
- priv->otg.set_peripheral = ingenic_usb_phy_set_peripheral;
-
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base)) {
- dev_err(dev, "Failed to map registers\n");
+ dev_err(priv->dev, "Failed to map registers\n");
return PTR_ERR(priv->base);
}
- priv->clk = devm_clk_get(dev, NULL);
+ priv->clk = devm_clk_get(priv->dev, NULL);
if (IS_ERR(priv->clk)) {
err = PTR_ERR(priv->clk);
if (err != -EPROBE_DEFER)
- dev_err(dev, "Failed to get clock\n");
+ dev_err(priv->dev, "Failed to get clock\n");
return err;
}
- priv->vcc_supply = devm_regulator_get(dev, "vcc");
+ priv->vcc_supply = devm_regulator_get(priv->dev, "vcc");
if (IS_ERR(priv->vcc_supply)) {
err = PTR_ERR(priv->vcc_supply);
if (err != -EPROBE_DEFER)
- dev_err(dev, "Failed to get regulator\n");
+ dev_err(priv->dev, "Failed to get regulator\n");
return err;
}
- err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
- if (err) {
- if (err != -EPROBE_DEFER)
- dev_err(dev, "Unable to register PHY\n");
- return err;
+ priv->phy = devm_phy_create(priv->dev, NULL, &ingenic_usb_phy_ops);
+ if (IS_ERR(priv)) {
+ dev_err(priv->dev, "Failed to create PHY: %ld\n", PTR_ERR(priv));
+ return PTR_ERR(priv);
+ }
+
+ provider = devm_of_phy_provider_register(priv->dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(priv->dev, "Failed to register PHY provider: %ld\n", PTR_ERR(provider));
+ return PTR_ERR(provider);
}
- return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy);
+ platform_set_drvdata(pdev, priv);
+ phy_set_drvdata(priv->phy, priv);
+
+ return 0;
+}
+
+static int ingenic_usb_phy_remove(struct platform_device *pdev)
+{
+ struct ingenic_usb_phy *priv = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(priv->clk);
+ regulator_disable(priv->vcc_supply);
+
+ return 0;
}
-static struct platform_driver ingenic_phy_driver = {
- .probe = jz4770_phy_probe,
+static const struct of_device_id ingenic_usb_phy_of_matches[] = {
+ { .compatible = "ingenic,jz4770-phy", .data = &jz4770_soc_info },
+ { .compatible = "ingenic,jz4780-phy", .data = &jz4780_soc_info },
+ { .compatible = "ingenic,x1000-phy", .data = &x1000_soc_info },
+ { .compatible = "ingenic,x1830-phy", .data = &x1830_soc_info },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);
+
+static struct platform_driver ingenic_usb_phy_driver = {
+ .probe = ingenic_usb_phy_probe,
+ .remove = ingenic_usb_phy_remove,
.driver = {
- .name = "jz4770-phy",
- .of_match_table = of_match_ptr(ingenic_usb_phy_of_matches),
+ .name = "ingenic-usb-phy",
+ .of_match_table = ingenic_usb_phy_of_matches,
},
};
-module_platform_driver(ingenic_phy_driver);
+module_platform_driver(ingenic_usb_phy_driver);
MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>");
MODULE_AUTHOR("漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>");
MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
MODULE_DESCRIPTION("Ingenic SoCs USB PHY driver");
+MODULE_ALIAS("jz4770_phy");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index ef4787cd3d37..ff24fca0a2d9 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -184,12 +184,4 @@ config USB_ULPI_VIEWPORT
Provides read/write operations to the ULPI phy register set for
controllers with a viewport register (e.g. Chipidea/ARC controllers).
-config JZ4770_PHY
- tristate "Ingenic SoCs Transceiver Driver"
- depends on MIPS || COMPILE_TEST
- select USB_PHY
- help
- This driver provides PHY support for the USB controller found
- on the JZ-series and X-series SoCs from Ingenic.
-
endmenu
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b352bdbe8712..df1d99010079 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -24,4 +24,3 @@ obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
-obj-$(CONFIG_JZ4770_PHY) += phy-jz4770.o
--
2.11.0
