From: Philipp Zabel <philipp.zabel@xxxxxxxxx>
Use gpio_is_valid instead of assuming that every GPIO
number != 0 is valid while 0 is not.
Signed-off-by: Philipp Zabel <philipp.zabel@xxxxxxxxx>
Acked-by: Eric Miao <eric.y.miao@xxxxxxxxx>
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/gadget/pxa25x_udc.c | 22 +++++++++++-----------
1 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 0ce4e28..e51c29a 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,7 +139,7 @@ static int is_vbus_present(void)
{
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
- if (mach->gpio_vbus) {
+ if (gpio_is_valid(mach->gpio_vbus)) {
int value = gpio_get_value(mach->gpio_vbus);
if (mach->gpio_vbus_inverted)
@@ -158,7 +158,7 @@ static void pullup_off(void)
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int off_level = mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, off_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
@@ -169,7 +169,7 @@ static void pullup_on(void)
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int on_level = !mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, on_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
@@ -1000,7 +1000,7 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
udc = container_of(_gadget, struct pxa25x_udc, gadget);
/* not all boards support pullup control */
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
return -EOPNOTSUPP;
udc->pullup = (is_active != 0);
@@ -2160,7 +2160,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
"pxa25x_udc GPIO VBUS"))) {
dev_dbg(&pdev->dev,
@@ -2173,7 +2173,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
} else
vbus_irq = 0;
- if (dev->mach->gpio_pullup) {
+ if (gpio_is_valid(dev->mach->gpio_pullup)) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
"pca25x_udc GPIO PULLUP"))) {
dev_dbg(&pdev->dev,
@@ -2256,10 +2256,10 @@ lubbock_fail0:
#endif
free_irq(irq, dev);
err_irq1:
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
- if (dev->mach->gpio_vbus)
+ if (gpio_is_valid(dev->mach->gpio_vbus))
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
clk_put(dev->clk);
@@ -2294,11 +2294,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
free_irq(LUBBOCK_USB_IRQ, dev);
}
#endif
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
gpio_free(dev->mach->gpio_vbus);
}
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
clk_put(dev->clk);
@@ -2329,7 +2329,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
WARNING("USB host won't detect disconnect!\n");
udc->suspended = 1;
--
1.6.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
