Controller version 0x0002450D has USB2 PHY RX sensitivity issues
that needs to be worked around by enabling phyrst-a-enable bit
in PHYRST_CFG register.
There is no way to distinguish between the controller version
before the device controller is started so we need to add this
DT property.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
Documentation/devicetree/bindings/usb/cdns,usb3.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index 7bc0263accee..e670adc955e1 100644
--- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -58,6 +58,10 @@ properties:
buffers expressed in KB
$ref: /schemas/types.yaml#/definitions/uint32
+ cdns,phyrst-a-enable:
+ description: Enable resetting of PHY if Rx fail is detected
+ type: boolean
+
required:
- compatible
- reg
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
