[PATCH v3 1/5] dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Convert ti,hd3ss3220.txt to YAML. Updated the binding documentation
as graph bindings of this device model Super Speed (SS) data bus to
the Super Speed (SS) capable connector.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v2->v3: Replaced Tabs with spaces in the example section.
v1->v2 : No change
Ref: https://patchwork.kernel.org/patch/11669423/
---
 .../devicetree/bindings/usb/ti,hd3ss3220.txt  | 38 ---------
 .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 81 +++++++++++++++++++
 2 files changed, 81 insertions(+), 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
 create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml

diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
deleted file mode 100644
index 2bd21b22ce95..000000000000
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI HD3SS3220 TypeC DRP Port Controller.
-
-Required properties:
- - compatible: Must be "ti,hd3ss3220".
- - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
- - interrupts: An interrupt specifier.
-
-Required sub-node:
- - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
-   bindings of the connector node are specified in:
-
-	Documentation/devicetree/bindings/connector/usb-connector.yaml
-
-Example:
-hd3ss3220@47 {
-	compatible = "ti,hd3ss3220";
-	reg = <0x47>;
-	interrupt-parent = <&gpio6>;
-	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
-	connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		data-role = "dual";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				hd3ss3220_ep: endpoint {
-					remote-endpoint = <&usb3_role_switch>;
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
new file mode 100644
index 000000000000..750a099529c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,hd3ss3220.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI HD3SS3220 TypeC DRP Port Controller
+
+maintainers:
+  - Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
+
+description: |-
+  HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel
+  Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The
+  HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a
+  Dual Role Port (DRP) making it ideal for any application.
+
+properties:
+  compatible:
+   const: ti,hd3ss3220
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    description: OF graph bindings (specified in bindings/graph.txt) that model
+      SS data bus to the SS capable connector.
+    type: object
+    properties:
+      port@0:
+        type: object
+        description: Super Speed (SS) capable connector.
+
+      port@1:
+        type: object
+        description: Super Speed (SS) data bus.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hd3ss3220@47 {
+                compatible = "ti,hd3ss3220";
+                reg = <0x47>;
+                interrupt-parent = <&gpio6>;
+                interrupts = <3>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        port@0 {
+                                reg = <0>;
+                                hd3ss3220_in_ep: endpoint {
+                                        remote-endpoint = <&ss_ep>;
+                                };
+                        };
+                        port@1 {
+                                reg = <1>;
+                                hd3ss3220_out_ep: endpoint {
+                                        remote-endpoint = <&usb3_role_switch>;
+                                };
+                        };
+                };
+        };
+    };
-- 
2.17.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux