On 2020-08-17 04:11, travelvia@xxxxxxxxxx wrote:
From: Cameron Nemo <cnemo@xxxxxxxxxxxx>
Add a compatible to be hooked into by the Rockchip rk3328 device tree.
The rk3399 compatible cannot be reused because the rk3328 SoCs may
require a specialized driver in the future, and old device trees must
remain compatible with newer kernels.
Signed-off-by: Cameron Nemo <cnemo@xxxxxxxxxxxx>
---
drivers/usb/dwc3/dwc3-of-simple.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 7df115012935..68d6e4fa0c6a 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -49,7 +49,8 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
* Some controllers need to toggle the usb3-otg reset before trying to
* initialize the PHY, otherwise the PHY times out.
*/
- if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
+ if (of_device_is_compatible(np, "rockchip,rk3328-dwc3") ||
Is this necessary? Even downstream there's no reset control in the DT,
so I can't see that it achieves anything.
Robin.
+ of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
simple->need_reset = true;
simple->resets = of_reset_control_array_get(np, false, true,
@@ -171,6 +172,7 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
};
static const struct of_device_id of_dwc3_simple_match[] = {
+ { .compatible = "rockchip,rk3328-dwc3" },
{ .compatible = "rockchip,rk3399-dwc3" },
{ .compatible = "xlnx,zynqmp-dwc3" },
{ .compatible = "cavium,octeon-7130-usb-uctl" },
