>From the spec: "6.6.8.1 SwapSourceStartTimer The SwapSourceStartTimer Shall be used by the new Source, after a Power Role Swap or Fast Role Swap, to ensure that it does not send Source_Capabilities Message before the new Sink is ready to receive the Source_Capabilities Message. The new Source Shall Not send the Source_Capabilities Message earlier than tSwapSourceStart after the last bit of the EOP of GoodCRC Message sent in response to the PS_RDY Message sent by the new Source indicating that its power supply is ready." This fixes TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 failures Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx> --- Changes since V1: - Comment on the permissible values of tSwapSourceStart --- drivers/usb/typec/tcpm/tcpm.c | 2 +- include/linux/usb/pd.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 3ef37202ee37..d38347bd3335 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -3555,7 +3555,7 @@ static void run_state_machine(struct tcpm_port *port) */ tcpm_set_pwr_role(port, TYPEC_SOURCE); tcpm_pd_send_control(port, PD_CTRL_PS_RDY); - tcpm_set_state(port, SRC_STARTUP, 0); + tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START); break; case VCONN_SWAP_ACCEPT: diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index b6c233e79bd4..ed5eed73ccf8 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -473,6 +473,7 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_ERROR_RECOVERY 100 /* minimum 25 is insufficient */ #define PD_T_SRCSWAPSTDBY 625 /* Maximum of 650ms */ #define PD_T_NEWSRC 250 /* Maximum of 275ms */ +#define PD_T_SWAP_SRC_START 20 /* Minimum of 20ms */ #define PD_T_DRP_TRY 100 /* 75 - 150 ms */ #define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */ -- 2.28.0.236.gb10cc79966-goog
