On Friday 10 July 2009 11:16:08 Daniel Mack wrote: > On Fri, Jul 10, 2009 at 11:04:13AM +0300, jouni wrote: > > I just tested this patch and it works for me. > > Thanks for testing! Could you provide the dmesg output? > > Daniel Yes, here it is. -jouni
[ 0.000000] Linux version 2.6.31-rc2patchtest4 (root@Timor) (gcc version 4.3.3 (Debian 4.3.3-13) ) #1 Fri Jul 10 10:32:02 EEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) [ 0.000000] BIOS-e820: 000000003fe90000 - 000000003fe9a000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fe9a000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fe90 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] Warning only 895MB will be used. [ 0.000000] Use a HIGHMEM enabled kernel. [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fe90000 (usable) [ 0.000000] modified: 000000003fe90000 - 000000003fe9a000 (ACPI data) [ 0.000000] modified: 000000003fe9a000 - 000000003ff00000 (ACPI NVS) [ 0.000000] modified: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] modified: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fa2000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037c00000 page 2M [ 0.000000] 0037c00000 - 0037fa2000 page 4k [ 0.000000] kernel direct mapping tables up to 37fa2000 @ 10000-15000 [ 0.000000] ACPI: RSDP 000f65b0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 3fe901d3 00050 (v01 PTLTD HunterWD 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3fe99e88 00074 (v01 LGE HunterWD 06040000 LGE 0000005F) [ 0.000000] ACPI: DSDT 3fe91a5d 0842B (v01 LGE HUNTER 06040000 INTL 20030224) [ 0.000000] ACPI: FACS 3feaafc0 00040 [ 0.000000] ACPI: APIC 3fe99efc 00068 (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: HPET 3fe99f64 00038 (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: MCFG 3fe99f9c 0003C (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: BOOT 3fe99fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 3fe9140e 0064F (v01 SataRe SataPri 00001000 INTL 20030224) [ 0.000000] ACPI: SSDT 3fe90d72 0069C (v01 SataRe SataSec 00001000 INTL 20030224) [ 0.000000] ACPI: SSDT 3fe90a41 00331 (v01 LGE HNT_EGFX 00001000 INTL 20030224) [ 0.000000] ACPI: SSDT 3fe905fc 00235 (v01 PmRef Cpu0Ist 00003000 INTL 20030224) [ 0.000000] ACPI: SSDT 3fe9043c 001C0 (v01 PmRef Cpu0Cst 00003001 INTL 20030224) [ 0.000000] ACPI: SSDT 3fe90223 00219 (v01 PmRef CpuPm 00003000 INTL 20030224) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 895MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37fa2000 [ 0.000000] low ram: 0 - 37fa2000 [ 0.000000] node 0 low ram: 00000000 - 37fa2000 [ 0.000000] node 0 bootmap 00011000 - 00017ff8 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037fa2000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 0001406a18] TEXT DATA BSS ==> [0001000000 - 0001406a18] [ 0.000000] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #3 [0001407000 - 000140d158] BRK ==> [0001407000 - 000140d158] [ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #5 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037fa2 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00037fa2 [ 0.000000] On node 0 totalpages: 229169 [ 0.000000] free_area_init_node: node 0, pgdat c1377d40, node_mem_map c140e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223426 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227377 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-rc2patchtest4 root=/dev/sda1 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 904488k/917128k available (2580k kernel code, 12136k reserved, 998k data, 280k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) [ 0.000000] vmalloc : 0xf87a2000 - 0xfffa2000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7fa2000 ( 895 MB) [ 0.000000] .init : 0xc1382000 - 0xc13c8000 ( 280 kB) [ 0.000000] .data : 0xc128509d - 0xc137e988 ( 998 kB) [ 0.000000] .text : 0xc1000000 - 0xc128509d (2580 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:288 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1596.150 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.30 BogoMIPS (lpj=1596150) [ 0.000999] Security Framework initialized [ 0.000999] Mount-cache hash table entries: 512 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] mce: CPU supports 5 MCE banks [ 0.000999] CPU0: Thermal monitoring enabled (TM1) [ 0.000999] CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 [ 0.000999] Checking 'hlt' instruction... OK. [ 0.004362] ACPI: Core revision 20090521 [ 0.020429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.030995] NET: Registered protocol family 16 [ 0.030995] ACPI: bus type pci registered [ 0.030995] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.030995] PCI: MCFG area at e0000000 reserved in E820 [ 0.030995] PCI: Using MMCONFIG for extended config space [ 0.030995] PCI: Using configuration type 1 for base access [ 0.032491] bio: create slab <bio-0> at 0 [ 0.033555] ACPI: EC: Look up EC in DSDT [ 0.037751] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.040270] ACPI: Interpreter enabled [ 0.040277] ACPI: (supports S0 S3 S4 S5) [ 0.040301] ACPI: Using IOAPIC for interrupt routing [ 0.052224] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.052227] ACPI: EC: driver started in interrupt mode [ 0.052312] ACPI: Power Resource [CTHT] (off) [ 0.053144] ACPI: No dock devices found. [ 0.053803] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.053919] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.053923] pci 0000:00:01.0: PME# disabled [ 0.054014] pci 0000:00:1b.0: reg 10 64bit mmio: [0xb8000000-0xb8003fff] [ 0.054070] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.054075] pci 0000:00:1b.0: PME# disabled [ 0.054151] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.054156] pci 0000:00:1c.0: PME# disabled [ 0.054235] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.054240] pci 0000:00:1c.2: PME# disabled [ 0.054300] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.054359] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.054417] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.054476] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f] [ 0.054539] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb8004000-0xb80043ff] [ 0.054598] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.054604] pci 0000:00:1d.7: PME# disabled [ 0.054743] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.054748] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.054752] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f [ 0.054757] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0300-030f [ 0.054784] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.054792] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.054800] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.054808] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.054816] pci 0000:00:1f.1: reg 20 io port: [0x1880-0x188f] [ 0.054867] pci 0000:00:1f.2: reg 10 io port: [0x18c0-0x18c7] [ 0.054875] pci 0000:00:1f.2: reg 14 io port: [0x18b8-0x18bb] [ 0.054883] pci 0000:00:1f.2: reg 18 io port: [0x18b0-0x18b7] [ 0.054891] pci 0000:00:1f.2: reg 1c io port: [0x1894-0x1897] [ 0.054899] pci 0000:00:1f.2: reg 20 io port: [0x18a0-0x18af] [ 0.054907] pci 0000:00:1f.2: reg 24 32bit mmio: [0xb8004400-0xb80047ff] [ 0.054934] pci 0000:00:1f.2: PME# supported from D3hot [ 0.054939] pci 0000:00:1f.2: PME# disabled [ 0.055000] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.055055] pci 0000:01:00.0: reg 10 32bit mmio: [0xc8000000-0xcfffffff] [ 0.055061] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] [ 0.055067] pci 0000:01:00.0: reg 18 32bit mmio: [0xb8100000-0xb810ffff] [ 0.055082] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.055098] pci 0000:01:00.0: supports D1 D2 [ 0.055112] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.055173] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.055176] pci 0000:00:01.0: bridge 32bit mmio: [0xb8100000-0xb81fffff] [ 0.055180] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc8000000-0xcfffffff] [ 0.055255] pci 0000:02:00.0: reg 10 64bit mmio: [0xbc000000-0xbc003fff] [ 0.055266] pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff] [ 0.055300] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.055351] pci 0000:02:00.0: supports D1 D2 [ 0.055354] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.055360] pci 0000:02:00.0: PME# disabled [ 0.055393] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.055486] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.055491] pci 0000:00:1c.0: bridge 32bit mmio: [0xbc000000-0xbfffffff] [ 0.055499] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xd3ffffff] [ 0.055552] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] [ 0.055557] pci 0000:00:1c.2: bridge 32bit mmio: [0xc0000000-0xc3ffffff] [ 0.055565] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd4000000-0xd7ffffff] [ 0.055613] pci 0000:06:00.0: reg 10 32bit mmio: [0xfedff000-0xfedfffff] [ 0.055640] pci 0000:06:00.0: supports D1 D2 [ 0.055642] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.055648] pci 0000:06:00.0: PME# disabled [ 0.055696] pci 0000:06:00.2: reg 10 32bit mmio: [0xc4006000-0xc40067ff] [ 0.055706] pci 0000:06:00.2: reg 14 32bit mmio: [0xc4000000-0xc4003fff] [ 0.055768] pci 0000:06:00.2: supports D1 D2 [ 0.055770] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot [ 0.055776] pci 0000:06:00.2: PME# disabled [ 0.055821] pci 0000:06:00.3: reg 10 32bit mmio: [0xc4004000-0xc4005fff] [ 0.055886] pci 0000:06:00.3: supports D1 D2 [ 0.055888] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot [ 0.055894] pci 0000:06:00.3: PME# disabled [ 0.055939] pci 0000:06:00.4: reg 10 32bit mmio: [0xc4007000-0xc40070ff] [ 0.055949] pci 0000:06:00.4: reg 14 32bit mmio: [0xc4006c00-0xc4006cff] [ 0.055959] pci 0000:06:00.4: reg 18 32bit mmio: [0xc4006800-0xc40068ff] [ 0.056013] pci 0000:06:00.4: supports D1 D2 [ 0.056015] pci 0000:06:00.4: PME# supported from D0 D1 D2 D3hot [ 0.056021] pci 0000:06:00.4: PME# disabled [ 0.056075] pci 0000:06:02.0: reg 10 32bit mmio: [0xc4008000-0xc4008fff] [ 0.056140] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold [ 0.056145] pci 0000:06:02.0: PME# disabled [ 0.056202] pci 0000:00:1e.0: transparent bridge [ 0.056209] pci 0000:00:1e.0: bridge 32bit mmio: [0xc4000000-0xc40fffff] [ 0.056259] pci_bus 0000:00: on NUMA node 0 [ 0.056265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.056501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.056612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.056717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.056844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.061802] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 *10 14 15) [ 0.061931] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *11 14 15) [ 0.062059] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 14 15) [ 0.062183] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11 14 15) [ 0.062307] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 14 15) *0, disabled. [ 0.062431] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 11 14 15) *0, disabled. [ 0.062555] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 14 15) *0, disabled. [ 0.062679] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 11 14 15) *10 [ 0.062954] SCSI subsystem initialized [ 0.062974] libata version 3.00 loaded. [ 0.063119] PCI: Using ACPI for IRQ routing [ 0.063324] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.063329] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.066016] pnp: PnP ACPI init [ 0.066024] ACPI: bus type pnp registered [ 0.069289] pnp: PnP ACPI: found 11 devices [ 0.069291] ACPI: ACPI bus type pnp unregistered [ 0.069301] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.069305] system 00:01: iomem range 0xf0000000-0xf0003fff has been reserved [ 0.069308] system 00:01: iomem range 0xf0004000-0xf0004fff has been reserved [ 0.069312] system 00:01: iomem range 0xf0005000-0xf0005fff has been reserved [ 0.069315] system 00:01: iomem range 0xf0008000-0xf000bfff has been reserved [ 0.069319] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.069326] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.069330] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.069333] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.069336] system 00:06: ioport range 0x1600-0x167f has been reserved [ 0.105073] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.105077] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.105081] pci 0000:00:01.0: MEM window: 0xb8100000-0xb81fffff [ 0.105085] pci 0000:00:01.0: PREFETCH window: 0xc8000000-0xcfffffff [ 0.105089] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.105093] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.105099] pci 0000:00:1c.0: MEM window: 0xbc000000-0xbfffffff [ 0.105105] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d3ffffff [ 0.105113] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.105117] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.105123] pci 0000:00:1c.2: MEM window: 0xc0000000-0xc3ffffff [ 0.105128] pci 0000:00:1c.2: PREFETCH window: 0x000000d4000000-0x000000d7ffffff [ 0.105139] pci 0000:06:00.0: CardBus bridge, secondary bus 0000:07 [ 0.105141] pci 0000:06:00.0: IO window: 0x005000-0x0050ff [ 0.105147] pci 0000:06:00.0: IO window: 0x005400-0x0054ff [ 0.105153] pci 0000:06:00.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.105159] pci 0000:06:00.0: MEM window: 0x44000000-0x47ffffff [ 0.105165] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.105169] pci 0000:00:1e.0: IO window: 0x5000-0x5fff [ 0.105175] pci 0000:00:1e.0: MEM window: 0xc4000000-0xc40fffff [ 0.105181] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.105193] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.105197] pci 0000:00:01.0: setting latency timer to 64 [ 0.105206] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.105211] pci 0000:00:1c.0: setting latency timer to 64 [ 0.105220] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.105225] pci 0000:00:1c.2: setting latency timer to 64 [ 0.105232] pci 0000:00:1e.0: setting latency timer to 64 [ 0.105243] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.105250] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.105253] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.105257] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.105260] pci_bus 0000:01: resource 1 mem: [0xb8100000-0xb81fffff] [ 0.105263] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff] [ 0.105266] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.105269] pci_bus 0000:02: resource 1 mem: [0xbc000000-0xbfffffff] [ 0.105272] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd3ffffff] [ 0.105275] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.105278] pci_bus 0000:04: resource 1 mem: [0xc0000000-0xc3ffffff] [ 0.105281] pci_bus 0000:04: resource 2 pref mem [0xd4000000-0xd7ffffff] [ 0.105284] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] [ 0.105287] pci_bus 0000:06: resource 1 mem: [0xc4000000-0xc40fffff] [ 0.105290] pci_bus 0000:06: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.105293] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.105296] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] [ 0.105299] pci_bus 0000:07: resource 0 io: [0x5000-0x50ff] [ 0.105302] pci_bus 0000:07: resource 1 io: [0x5400-0x54ff] [ 0.105305] pci_bus 0000:07: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.105308] pci_bus 0000:07: resource 3 mem: [0x44000000-0x47ffffff] [ 0.105346] NET: Registered protocol family 2 [ 0.105429] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.105726] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.106555] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.106832] TCP: Hash tables configured (established 131072 bind 65536) [ 0.106835] TCP reno registered [ 0.106926] NET: Registered protocol family 1 [ 0.107121] Simple Boot Flag at 0x39 set to 0x1 [ 0.107367] Scanning for low memory corruption every 60 seconds [ 0.107540] audit: initializing netlink socket (disabled) [ 0.107553] type=2000 audit(1247212532.106:1): initialized [ 0.107860] msgmni has been set to 1766 [ 0.108021] alg: No test for stdrng (krng) [ 0.108032] io scheduler noop registered (default) [ 0.108046] io scheduler cfq registered [ 0.108148] pci 0000:01:00.0: Boot video device [ 0.108287] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.108294] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.108447] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.108458] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.108665] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.108675] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.111736] Uniform Multi-Platform E-IDE driver [ 0.111811] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x04) [ 0.111823] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.111833] piix 0000:00:1f.1: IDE port disabled [ 0.111843] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 0.111850] ide0: BM-DMA at 0x1880-0x1887 [ 0.111866] Probing IDE interface ide0... [ 0.500935] Switched to high resolution mode on CPU 0 [ 1.089011] hdb: HL-DT-ST DVDRAM GSA-4082N, ATAPI CD/DVD-ROM drive [ 1.089068] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.089387] hdb: UDMA/33 mode selected [ 1.090120] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.093601] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.093605] ide-gd driver 1.18 [ 1.093699] ahci 0000:00:1f.2: version 3.0 [ 1.093712] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.093799] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode [ 1.093804] ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part [ 1.093809] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.093993] scsi0 : ahci [ 1.094126] scsi1 : ahci [ 1.094206] scsi2 : ahci [ 1.094291] scsi3 : ahci [ 1.094455] ata1: SATA max UDMA/133 abar m1024@0xb8004400 port 0xb8004500 irq 19 [ 1.094458] ata2: DUMMY [ 1.094461] ata3: SATA max UDMA/133 abar m1024@0xb8004400 port 0xb8004600 irq 19 [ 1.094464] ata4: DUMMY [ 1.094564] ohci1394 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.145046] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[c4006000-c40067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.145223] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.145263] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 1.146848] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.148388] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.148393] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.148396] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.148399] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.148402] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.148537] mice: PS/2 mouse device common for all mice [ 1.148619] cpuidle: using governor ladder [ 1.148621] cpuidle: using governor menu [ 1.149055] TCP cubic registered [ 1.149058] NET: Registered protocol family 17 [ 1.149078] Using IPI Shortcut mode [ 1.163996] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.399018] ata3: SATA link down (SStatus 0 SControl 300) [ 1.654018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.655095] ata1.00: ATA-7: HTS541080G9SA00, MB4OC61M, max UDMA/100 [ 1.655099] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.656443] ata1.00: configured for UDMA/100 [ 1.667102] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5 [ 1.667282] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.667319] sd 0:0:0:0: [sda] Write Protect is off [ 1.667322] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.667341] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.667442] sda: sda1 sda3 sda4 [ 2.022217] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.048069] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.048404] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). [ 2.048722] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). [ 2.086685] EXT4-fs (sda1): barriers enabled [ 2.107371] kjournald2 starting: pid 390, dev sda1:8, commit interval 5 seconds [ 2.107382] EXT4-fs (sda1): delayed allocation enabled [ 2.107386] EXT4-fs: file extents enabled [ 2.107454] EXT4-fs: mballoc enabled [ 2.107465] EXT4-fs (sda1): orphan cleanup on readonly fs [ 2.135197] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 261543 [ 2.135226] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 261537 [ 2.135233] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 261534 [ 2.135534] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 361 [ 2.135545] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 295 [ 2.135553] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 103 [ 2.135560] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 102 [ 2.135567] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 45 [ 2.135573] EXT4-fs (sda1): 8 orphan inodes deleted [ 2.135576] EXT4-fs (sda1): recovery complete [ 2.156222] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.156234] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 2.156260] Freeing unused kernel memory: 280k freed [ 5.279536] Marking TSC unstable due to TSC halts in idle [ 5.279612] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 5.279645] processor LNXCPU:00: registered as cooling_device0 [ 5.279649] ACPI: Processor [CPU0] (supports 8 throttling states) [ 5.281895] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.281903] ACPI: Power Button [PWRF] [ 5.284502] ACPI: AC Adapter [AC] (on-line) [ 5.284754] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 5.284819] ACPI: Lid Switch [LID0] [ 5.284869] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 5.284877] ACPI: Power Button [PWRB] [ 5.284929] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 5.284933] ACPI: Sleep Button [SLPB] [ 5.286217] thermal LNXTHERM:01: registered as thermal_zone0 [ 5.286225] ACPI: Thermal Zone [TZ1] (40 C) [ 5.287624] thermal LNXTHERM:02: registered as thermal_zone1 [ 5.287633] ACPI: Thermal Zone [TZ2] (59 C) [ 5.297700] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5 [ 5.297710] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) [ 5.303633] rtc_cmos 00:07: RTC can wake from S4 [ 5.303660] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 5.303689] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 5.307319] fan PNP0C0B:00: registered as cooling_device1 [ 5.307325] ACPI: Fan [FAN0] (off) [ 5.311183] ACPI: Battery Slot [CMB0] (battery present) [ 5.441622] sky2 driver version 1.23 [ 5.441664] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.441679] sky2 0000:02:00.0: setting latency timer to 64 [ 5.441705] sky2 0000:02:00.0: Yukon-2 EC chip revision 1 [ 5.441821] sky2 0000:02:00.0: irq 27 for MSI/MSI-X [ 5.442167] sky2 eth0: addr 00:e0:91:10:54:f0 [ 5.442462] usbcore: registered new interface driver usbfs [ 5.442476] usbcore: registered new interface driver hub [ 5.442499] usbcore: registered new device driver usb [ 5.470575] lib80211: common routines for IEEE802.11 drivers [ 5.470579] lib80211_crypt: registered algorithm 'NULL' [ 5.515259] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.517156] tifm_7xx1 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.533051] ide-cd driver 5.00 [ 5.534841] ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 5.534848] Uniform CD-ROM driver Revision: 3.20 [ 5.546027] tifm_core: MMC/SD card detected in socket 0:3 [ 5.552543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.552582] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.552601] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.552605] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.552613] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.556536] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.556543] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5.564051] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 5.564055] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> [ 5.566317] yenta_cardbus 0000:06:00.0: CardBus bridge found [1854:0032] [ 5.566341] yenta_cardbus 0000:06:00.0: Using INTVAL to route CSC interrupts to PCI [ 5.566343] yenta_cardbus 0000:06:00.0: Routing CardBus interrupts to PCI [ 5.566350] yenta_cardbus 0000:06:00.0: TI: mfunc 0x01d01002, devctl 0x64 [ 5.575950] uhci_hcd: USB Universal Host Controller Interface driver [ 5.577719] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb8004000 [ 5.587029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.587082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.587085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.587089] usb usb1: Product: EHCI Host Controller [ 5.587091] usb usb1: Manufacturer: Linux 2.6.31-rc2patchtest4 ehci_hcd [ 5.587094] usb usb1: SerialNumber: 0000:00:1d.7 [ 5.587175] usb usb1: configuration #1 chosen from 1 choice [ 5.587207] hub 1-0:1.0: USB hub found [ 5.587217] hub 1-0:1.0: 8 ports detected [ 5.587317] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.587328] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.587332] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.587338] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.587369] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 [ 5.587407] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.587410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.587413] usb usb2: Product: UHCI Host Controller [ 5.587415] usb usb2: Manufacturer: Linux 2.6.31-rc2patchtest4 uhci_hcd [ 5.587418] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.587468] usb usb2: configuration #1 chosen from 1 choice [ 5.587495] hub 2-0:1.0: USB hub found [ 5.587501] hub 2-0:1.0: 2 ports detected [ 5.587548] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.587554] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.587558] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.587564] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.587590] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 5.587623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.587626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.587629] usb usb3: Product: UHCI Host Controller [ 5.587631] usb usb3: Manufacturer: Linux 2.6.31-rc2patchtest4 uhci_hcd [ 5.587634] usb usb3: SerialNumber: 0000:00:1d.1 [ 5.587685] usb usb3: configuration #1 chosen from 1 choice [ 5.587712] hub 3-0:1.0: USB hub found [ 5.587718] hub 3-0:1.0: 2 ports detected [ 5.587762] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.587769] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.587773] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.587778] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.587811] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 5.587848] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.587851] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.587854] usb usb4: Product: UHCI Host Controller [ 5.587857] usb usb4: Manufacturer: Linux 2.6.31-rc2patchtest4 uhci_hcd [ 5.587859] usb usb4: SerialNumber: 0000:00:1d.2 [ 5.587908] usb usb4: configuration #1 chosen from 1 choice [ 5.587936] hub 4-0:1.0: USB hub found [ 5.587942] hub 4-0:1.0: 2 ports detected [ 5.587991] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 5.587997] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.588013] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.588018] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.588045] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 5.588082] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.588085] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.588088] usb usb5: Product: UHCI Host Controller [ 5.588090] usb usb5: Manufacturer: Linux 2.6.31-rc2patchtest4 uhci_hcd [ 5.588093] usb usb5: SerialNumber: 0000:00:1d.3 [ 5.588138] usb usb5: configuration #1 chosen from 1 choice [ 5.588165] hub 5-0:1.0: USB hub found [ 5.588172] hub 5-0:1.0: 2 ports detected [ 5.605594] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 5.605598] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 5.789812] yenta_cardbus 0000:06:00.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 5.789817] yenta_cardbus 0000:06:00.0: Socket status: 30000006 [ 5.789822] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a [ 5.789831] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 5.789835] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc40fffff [ 5.789838] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 5.790452] ipw2200 0000:06:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.790508] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 5.790548] ipw2200 0000:06:02.0: firmware: requesting ipw2200-bss.fw [ 5.835720] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 5.835733] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.835760] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.000015] Clocksource tsc unstable (delta = -81135911 ns) [ 6.115097] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 6.116534] udev: renamed network interface eth1 to eth2 [ 6.204079] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 6.259634] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008 [ 6.308534] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6 [ 6.366866] usb 4-2: New USB device found, idVendor=046d, idProduct=c019 [ 6.366871] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.366874] usb 4-2: Product: USB Optical Mouse [ 6.366877] usb 4-2: Manufacturer: Logitech [ 6.366969] usb 4-2: configuration #1 chosen from 1 choice [ 6.510905] usbcore: registered new interface driver hiddev [ 6.524343] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input7 [ 6.524427] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0 [ 6.524444] usbcore: registered new interface driver usbhid [ 6.524446] usbhid: v2.6:USB HID core driver [ 6.575036] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 6.734100] usb 5-2: string descriptor 0 read error: -32 [ 6.734147] usb 5-2: New USB device found, idVendor=043e, idProduct=9802 [ 6.734150] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.734243] usb 5-2: configuration #1 chosen from 1 choice [ 6.792200] input: HID 043e:9802 as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input8 [ 6.792308] generic-usb 0003:043E:9802.0002: input,hiddev96,hidraw1: USB HID v1.01 Keyboard [HID 043e:9802] on usb-0000:00:1d.3-2/input0 [ 7.581588] Adding 947824k swap on /dev/sda4. Priority:-1 extents:1 across:947824k [ 7.729997] EXT4-fs (sda1): internal journal on sda1:8 [ 7.953552] loop: module loaded [ 8.388046] fuse init (API version 7.12) [ 8.651697] EXT4-fs (sda3): barriers enabled [ 8.668074] kjournald2 starting: pid 1324, dev sda3:8, commit interval 5 seconds [ 8.668458] EXT4-fs (sda3): internal journal on sda3:8 [ 8.668461] EXT4-fs (sda3): delayed allocation enabled [ 8.668464] EXT4-fs: file extents enabled [ 8.668599] EXT4-fs: mballoc enabled [ 8.668614] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 10.388618] sky2 eth0: enabling interface [ 12.054163] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.385646] NET: Registered protocol family 10 [ 21.386051] lo: Disabled Privacy Extensions [ 32.068029] eth0: no IPv6 routers present [ 37.524348] pci 0000:01:00.0: power state changed by ACPI to D0 [ 37.524366] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 37.631582] Linux agpgart interface v0.103 [ 37.784576] [drm] Initialized drm 1.1.0 20060810 [ 37.857198] [drm] radeon default to kernel modesetting. [ 37.857202] [drm] radeon kernel modesetting enabled. [ 37.857251] radeon 0000:01:00.0: setting latency timer to 64 [ 37.859658] [drm] radeon: Initializing kernel modesetting. [ 37.859712] [drm] register mmio base: 0xB8100000 [ 37.859714] [drm] register mmio size: 65536 [ 37.859851] ATOM BIOS: LG [ 37.860060] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 37.861334] [drm] Detected VRAM RAM=128M, BAR=128M [ 37.861339] [drm] RAM width 128bits DDR [ 37.861345] [drm] Clocks initialized ! [ 37.861568] [drm] radeon: 2 pipes initialized. [ 37.861577] [drm] radeon: VRAM 128M [ 37.861580] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 37.861582] [drm] radeon: GTT 512M [ 37.861584] [drm] radeon: GTT from 0x08000000 to 0x27FFFFFF [ 37.890752] [drm] radeon: irq initialized. [ 37.890779] [TTM] TTM available graphics memory: 441 MiB [ 37.890781] [TTM] TTM available object memory: 441 MiB [ 37.890798] [drm] radeon: 128M of VRAM memory ready [ 37.890800] [drm] radeon: 512M of GTT memory ready. [ 37.890803] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 37.891500] [drm] PCIE GART of 512M enabled (table at 0x00040000). [ 37.891508] [drm] radeon: cp idle (0x10000C03) [ 37.891512] [drm] Loading R400 Microcode [ 37.891662] [drm] radeon: ring at 0x0000000008000000 [ 37.891686] [drm] ring test succeeded in 1 usecs [ 37.891809] [drm] radeon: ib pool ready. [ 37.891882] [drm] ib test succeeded in 0 usecs [ 37.893114] [drm] Radeon Display Connectors [ 37.893117] [drm] Connector 0: [ 37.893119] [drm] VGA [ 37.893122] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 37.893124] [drm] Encoders: [ 37.893126] [drm] CRT1: INTERNAL_DAC1 [ 37.893128] [drm] Connector 1: [ 37.893130] [drm] LVDS [ 37.893132] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 37.893134] [drm] Encoders: [ 37.893136] [drm] LCD1: INTERNAL_LVDS [ 37.893137] [drm] Connector 2: [ 37.893139] [drm] DVI-I [ 37.893142] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 37.893143] [drm] Encoders: [ 37.893145] [drm] DFP1: INTERNAL_TMDS1 [ 37.895667] i2c-adapter i2c-1: unable to read EDID block. [ 37.895671] radeon 0000:01:00.0: VGA-1: no EDID data [ 37.977339] i2c-adapter i2c-3: unable to read EDID block. [ 37.977346] radeon 0000:01:00.0: DVI-I-1: no EDID data [ 38.036097] [drm] fb mappable at 0xC80C0000 [ 38.036099] [drm] vram apper at 0xC8000000 [ 38.036101] [drm] size 7056000 [ 38.036103] [drm] fb depth is 24 [ 38.036105] [drm] pitch is 6720 [ 38.037298] Console: switching to colour frame buffer device 210x65 [ 38.037306] fb0: radeondrmfb frame buffer device [ 38.037308] registered panic notifier [ 38.037310] [drm] radeon: kernel modesetting successfully initialized. [ 38.037315] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
