Hi Alan: Alan Stern wrote: > It's hard to tell exactly what's going on from Mario's description. > IIUC, after resume the system knows that the HCI device is gone. It's > the HID devices that are in the same state as before. > > A dmesg log including boot and a suspend-resume cycle, from a kernel > with CONFIG_USB_DEBUG enabled, would help clarify the situation. > > Alan Stern > > Sorry for the delay, had some hardware failures. Here's a dmesg log with CONFIG_USB_DEBUG turned on and a suspend-resume cycle. -- Mario Limonciello *Dell | Linux Engineering* mario_limonciello@xxxxxxxx
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-2-generic (root@dell-desktop) (gcc version 4.4.0 (Ubuntu 4.4.0-8ubuntu2) ) #16 SMP Thu Jul 9 01:06:45 CDT 2009 (Ubuntu 2.6.31-2.16-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable) [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f8a1000 (usable) [ 0.000000] BIOS-e820: 000000007f8a1000 - 000000007f8a7000 (reserved) [ 0.000000] BIOS-e820: 000000007f8a7000 - 000000007f9ba000 (usable) [ 0.000000] BIOS-e820: 000000007f9ba000 - 000000007fa0f000 (reserved) [ 0.000000] BIOS-e820: 000000007fa0f000 - 000000007fb08000 (usable) [ 0.000000] BIOS-e820: 000000007fb08000 - 000000007fd0f000 (reserved) [ 0.000000] BIOS-e820: 000000007fd0f000 - 000000007fd19000 (usable) [ 0.000000] BIOS-e820: 000000007fd19000 - 000000007fd1f000 (reserved) [ 0.000000] BIOS-e820: 000000007fd1f000 - 000000007fd63000 (usable) [ 0.000000] BIOS-e820: 000000007fd63000 - 000000007fd9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fd9f000 - 000000007fde2000 (usable) [ 0.000000] BIOS-e820: 000000007fde2000 - 000000007fdff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fdff000 - 000000007fe00000 (usable) [ 0.000000] BIOS-e820: 000000007fe00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7fe00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009d400 (usable) [ 0.000000] modified: 000000000009d400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f8a1000 (usable) [ 0.000000] modified: 000000007f8a1000 - 000000007f8a7000 (reserved) [ 0.000000] modified: 000000007f8a7000 - 000000007f9ba000 (usable) [ 0.000000] modified: 000000007f9ba000 - 000000007fa0f000 (reserved) [ 0.000000] modified: 000000007fa0f000 - 000000007fb08000 (usable) [ 0.000000] modified: 000000007fb08000 - 000000007fd0f000 (reserved) [ 0.000000] modified: 000000007fd0f000 - 000000007fd19000 (usable) [ 0.000000] modified: 000000007fd19000 - 000000007fd1f000 (reserved) [ 0.000000] modified: 000000007fd1f000 - 000000007fd63000 (usable) [ 0.000000] modified: 000000007fd63000 - 000000007fd9f000 (ACPI NVS) [ 0.000000] modified: 000000007fd9f000 - 000000007fde2000 (usable) [ 0.000000] modified: 000000007fde2000 - 000000007fdff000 (ACPI data) [ 0.000000] modified: 000000007fdff000 - 000000007fe00000 (usable) [ 0.000000] modified: 000000007fe00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378c9000 - 37fef19b [ 0.000000] Allocated new RAMDISK: 008b8000 - 00fde19b [ 0.000000] Move RAMDISK from 00000000378c9000 - 0000000037fef19a to 008b8000 - 00fde19a [ 0.000000] ACPI: RSDP 000f7840 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 7fdf6274 00074 (v01 DELL FX09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7fde6000 000F4 (v03 DELL M09 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 7fde7000 0889E (v02 DELL M09 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 7fd9efc0 00040 [ 0.000000] ACPI: HPET 7fdfed16 00038 (v01 DELL M09 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7fdfed4e 0003C (v01 DELL M09 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 7fdfed8a 00068 (v01 DELL M09 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7fdfedf2 00028 (v01 DELL M09 06040000 LTP 00000001) [ 0.000000] ACPI: OSFR 7fdfee1a 00070 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: SLIC 7fdfee8a 00176 (v01 DELL FX09 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 7fde5000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7fde4000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7fde3000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1158MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b3618] TEXT DATA BSS ==> [0000100000 - 00008b3618] [ 0.000000] #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000] [ 0.000000] #5 [00008b4000 - 00008b711c] BRK ==> [00008b4000 - 00008b711c] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008b8000 - 0000fde19b] NEW RAMDISK ==> [00008b8000 - 0000fde19b] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f78f0] f78f0 [ 0.000000] Reserving 64MB of memory at 16MB for crashkernel (System RAM: 2046MB) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[9] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007f8a1 [ 0.000000] 0: 0x0007f8a7 -> 0x0007f9ba [ 0.000000] 0: 0x0007fa0f -> 0x0007fb08 [ 0.000000] 0: 0x0007fd0f -> 0x0007fd19 [ 0.000000] 0: 0x0007fd1f -> 0x0007fd63 [ 0.000000] 0: 0x0007fd9f -> 0x0007fde2 [ 0.000000] 0: 0x0007fdff -> 0x0007fe00 [ 0.000000] On node 0 totalpages: 522968 [ 0.000000] free_area_init_node: node 0, pgdat c0782580, node_mem_map c5000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3961 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2317 pages used for memmap [ 0.000000] HighMem zone: 293428 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c600a000, static data 34940 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518875 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-2-generic root=UUID=d9831d17-7095-49ec-9199-8083340196e1 ro quiet splash crashkernel=384M-2G:64M,2G-:128M [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 10475520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fe00) [ 0.000000] Memory: 1982664k/2095104k available (4596k kernel code, 108356k reserved, 2121k data, 536k init, 1182980k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0797000 - 0xc081d000 ( 536 kB) [ 0.000000] .data : 0xc057d146 - 0xc078f928 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc057d146 (4596 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches PMTIMER. 2 loops [ 0.000000] Detected 2526.985 MHz processor. [ 0.001156] Console: colour VGA+ 80x25 [ 0.001158] console [tty0] enabled [ 0.001292] hpet clockevent registered [ 0.001295] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.001300] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.97 BogoMIPS (lpj=10107940) [ 0.001314] Security Framework initialized [ 0.001319] SELinux: Disabled at boot. [ 0.001325] Mount-cache hash table entries: 512 [ 0.001429] Initializing cgroup subsys ns [ 0.001432] Initializing cgroup subsys cpuacct [ 0.001435] Initializing cgroup subsys memory [ 0.001440] Initializing cgroup subsys freezer [ 0.001442] Initializing cgroup subsys net_cls [ 0.001454] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001456] CPU: L2 cache: 3072K [ 0.001458] CPU: Physical Processor ID: 0 [ 0.001459] CPU: Processor Core ID: 0 [ 0.001462] using mwait in idle threads. [ 0.001467] Performance Counters: Core2 events, Intel PMU driver. [ 0.001474] ... version: 2 [ 0.001475] ... bit width: 40 [ 0.001476] ... generic counters: 2 [ 0.001478] ... value mask: 000000ffffffffff [ 0.001479] ... max period: 000000007fffffff [ 0.001480] ... fixed-purpose counters: 3 [ 0.001482] ... counter mask: 0000000700000003 [ 0.001486] Checking 'hlt' instruction... OK. [ 0.018152] ACPI: Core revision 20090521 [ 0.032572] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072771] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5053.96 BogoMIPS (lpj=10107928) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.160534] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.160547] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164015] Brought up 2 CPUs [ 0.164017] Total of 2 processors activated (10107.93 BogoMIPS). [ 0.164063] CPU0 attaching sched-domain: [ 0.164065] domain 0: span 0-1 level MC [ 0.164067] groups: 0 1 [ 0.164072] CPU1 attaching sched-domain: [ 0.164074] domain 0: span 0-1 level MC [ 0.164075] groups: 1 0 [ 0.164136] Booting paravirtualized kernel on bare hardware [ 0.164141] regulator: core version 0.5 [ 0.164141] Time: 2:58:03 Date: 07/10/09 [ 0.164141] NET: Registered protocol family 16 [ 0.164141] EISA bus registered [ 0.164141] ACPI: bus type pci registered [ 0.164141] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.164141] PCI: MCFG area at e0000000 reserved in E820 [ 0.164141] PCI: Using MMCONFIG for extended config space [ 0.164141] PCI: Using configuration type 1 for base access [ 0.168047] bio: create slab <bio-0> at 0 [ 0.168900] ACPI: EC: Look up EC in DSDT [ 0.173124] ACPI: BIOS _OSI(Linux) query ignored [ 0.184025] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.216051] ACPI: Interpreter enabled [ 0.216055] ACPI: (supports S0 S3 S4 S5) [ 0.216073] ACPI: Using IOAPIC for interrupt routing [ 0.224865] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.224865] ACPI: EC: driver started in interrupt mode [ 0.224865] ACPI: Power Resource [FN00] (off) [ 0.224865] ACPI: Power Resource [FN01] (off) [ 0.224865] ACPI: No dock devices found. [ 0.224942] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.225054] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.225057] pci 0000:00:01.0: PME# disabled [ 0.225147] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 0.225249] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 0.225357] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] [ 0.225459] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc304800-0xfc304bff] [ 0.225531] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.225536] pci 0000:00:1a.7: PME# disabled [ 0.225590] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc300000-0xfc303fff] [ 0.225647] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.225652] pci 0000:00:1b.0: PME# disabled [ 0.225731] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.225735] pci 0000:00:1c.0: PME# disabled [ 0.225816] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.225820] pci 0000:00:1c.1: PME# disabled [ 0.225902] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.225906] pci 0000:00:1c.2: PME# disabled [ 0.225994] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.226094] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.226184] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.226278] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc304c00-0xfc304fff] [ 0.226346] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.226351] pci 0000:00:1d.7: PME# disabled [ 0.226591] pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] [ 0.226599] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] [ 0.226606] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] [ 0.226613] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] [ 0.226620] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] [ 0.226627] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc304000-0xfc3047ff] [ 0.226672] pci 0000:00:1f.2: PME# supported from D3hot [ 0.226676] pci 0000:00:1f.2: PME# disabled [ 0.226713] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.226731] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.226790] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.226797] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] [ 0.226804] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfc00ffff] [ 0.226828] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.226856] pci 0000:01:00.0: supports D1 D2 [ 0.226899] pci 0000:01:00.1: reg 10 32bit mmio: [0xfc010000-0xfc013fff] [ 0.226957] pci 0000:01:00.1: supports D1 D2 [ 0.227020] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.227023] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff] [ 0.227027] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.227258] pci 0000:02:00.0: reg 10 64bit mmio: [0xf6000000-0xf600ffff] [ 0.227359] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.227365] pci 0000:02:00.0: PME# disabled [ 0.227435] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.227439] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.227446] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.227500] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.227504] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.227512] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] [ 0.227858] pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa003fff] [ 0.228065] pci 0000:06:00.0: supports D1 D2 [ 0.228067] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.228077] pci 0000:06:00.0: PME# disabled [ 0.228201] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff] [ 0.228205] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] [ 0.228213] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] [ 0.228273] pci 0000:00:1e.0: transparent bridge [ 0.228309] pci_bus 0000:00: on NUMA node 0 [ 0.228314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.228436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.228502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.228634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.228694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.228749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.236449] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.236449] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.236449] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.236449] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.236449] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.236503] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.236589] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.236677] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.243425] SCSI subsystem initialized [ 0.243425] libata version 3.00 loaded. [ 0.243425] usbcore: registered new interface driver usbfs [ 0.243425] usbcore: registered new interface driver hub [ 0.243425] usbcore: registered new device driver usb [ 0.244048] ACPI: WMI: Mapper loaded [ 0.244048] PCI: Using ACPI for IRQ routing [ 0.260007] Bluetooth: Core ver 2.15 [ 0.260037] NET: Registered protocol family 31 [ 0.260037] Bluetooth: HCI device and connection manager initialized [ 0.260037] Bluetooth: HCI socket layer initialized [ 0.260037] NET: Registered protocol family 8 [ 0.260037] NET: Registered protocol family 20 [ 0.260037] NetLabel: Initializing [ 0.260037] NetLabel: domain hash size = 128 [ 0.260037] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.260037] NetLabel: unlabeled traffic allowed by default [ 0.260037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.260037] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.284880] pnp: PnP ACPI init [ 0.284887] ACPI: bus type pnp registered [ 0.286515] pnp: PnP ACPI: found 10 devices [ 0.286517] ACPI: ACPI bus type pnp unregistered [ 0.286520] PnPBIOS: Disabled by ACPI PNP [ 0.286533] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.286538] system 00:05: ioport range 0x910-0x917 has been reserved [ 0.286540] system 00:05: ioport range 0x480-0x48f has been reserved [ 0.286543] system 00:05: ioport range 0x900-0x903 has been reserved [ 0.286545] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.286547] system 00:05: ioport range 0x1000-0x107f has been reserved [ 0.286550] system 00:05: ioport range 0x400-0x47f has been reserved [ 0.286552] system 00:05: ioport range 0x1180-0x11ff has been reserved [ 0.286554] system 00:05: ioport range 0x164e-0x164f has been reserved [ 0.286556] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 0.286562] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.286564] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.286567] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.286569] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.286572] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.286574] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.286577] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.321442] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.321445] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.321449] pci 0000:00:01.0: MEM window: 0xfc000000-0xfc0fffff [ 0.321452] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.321456] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.321459] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.321465] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff [ 0.321469] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.321477] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.321480] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.321486] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff [ 0.321490] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 0.321497] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 0.321500] pci 0000:00:1c.2: IO window: 0x5000-0x5fff [ 0.321506] pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff [ 0.321510] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff [ 0.321517] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.321519] pci 0000:00:1e.0: IO window: disabled [ 0.321524] pci 0000:00:1e.0: MEM window: disabled [ 0.321528] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.321537] alloc irq_desc for 16 on node -1 [ 0.321539] alloc kstat_irqs on node -1 [ 0.321542] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.321546] pci 0000:00:01.0: setting latency timer to 64 [ 0.321553] alloc irq_desc for 17 on node -1 [ 0.321554] alloc kstat_irqs on node -1 [ 0.321557] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.321561] pci 0000:00:1c.0: setting latency timer to 64 [ 0.321569] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.321573] pci 0000:00:1c.1: setting latency timer to 64 [ 0.321580] alloc irq_desc for 18 on node -1 [ 0.321581] alloc kstat_irqs on node -1 [ 0.321584] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.321588] pci 0000:00:1c.2: setting latency timer to 64 [ 0.321595] pci 0000:00:1e.0: setting latency timer to 64 [ 0.321599] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.321601] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.321604] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.321606] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc0fffff] [ 0.321608] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.321610] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.321612] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff] [ 0.321615] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.321617] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.321619] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff] [ 0.321621] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff] [ 0.321623] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] [ 0.321626] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff] [ 0.321628] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff] [ 0.321630] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.321632] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] [ 0.321656] NET: Registered protocol family 2 [ 0.321724] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.321949] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.322293] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.322455] TCP: Hash tables configured (established 131072 bind 65536) [ 0.322457] TCP reno registered [ 0.322510] NET: Registered protocol family 1 [ 0.322552] Trying to unpack rootfs image as initramfs... [ 0.490198] Freeing initrd memory: 7320k freed [ 0.497546] Simple Boot Flag at 0x36 set to 0x1 [ 0.497823] cpufreq-nforce2: No nForce2 chipset. [ 0.497908] Scanning for low memory corruption every 60 seconds [ 0.498084] audit: initializing netlink socket (disabled) [ 0.498097] type=2000 audit(1247194683.496:1): initialized [ 0.502581] Switched to high resolution mode on CPU 1 [ 0.504001] Switched to high resolution mode on CPU 0 [ 0.509167] highmem bounce pool size: 64 pages [ 0.509171] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.511237] VFS: Disk quotas dquot_6.5.2 [ 0.511302] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.511973] fuse init (API version 7.12) [ 0.512121] msgmni has been set to 1577 [ 0.512286] alg: No test for stdrng (krng) [ 0.512296] io scheduler noop registered [ 0.512297] io scheduler anticipatory registered [ 0.512299] io scheduler deadline registered [ 0.512349] io scheduler cfq registered (default) [ 0.512362] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003b [ 0.512364] pci 0000:00:1a.0: Performing full reset [ 0.512380] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.512381] pci 0000:00:1a.1: Performing full reset [ 0.512399] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.512401] pci 0000:00:1a.2: Performing full reset [ 0.512436] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b [ 0.512438] pci 0000:00:1d.0: Performing full reset [ 0.512454] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.512455] pci 0000:00:1d.1: Performing full reset [ 0.512472] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.512473] pci 0000:00:1d.2: Performing full reset [ 0.512503] pci 0000:01:00.0: Boot video device [ 0.512613] alloc irq_desc for 24 on node -1 [ 0.512615] alloc kstat_irqs on node -1 [ 0.512622] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.512628] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.512795] alloc irq_desc for 25 on node -1 [ 0.512796] alloc kstat_irqs on node -1 [ 0.512804] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.512814] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.513026] alloc irq_desc for 26 on node -1 [ 0.513028] alloc kstat_irqs on node -1 [ 0.513036] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.513046] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.513342] alloc irq_desc for 27 on node -1 [ 0.513343] alloc kstat_irqs on node -1 [ 0.513351] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X [ 0.513362] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.513540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.513705] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.513904] ACPI: AC Adapter [ADP1] (on-line) [ 0.513997] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.514000] ACPI: Power Button [PWRF] [ 0.514067] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.514100] ACPI: Lid Switch [LID0] [ 0.514151] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.514157] ACPI: Power Button [PWRB] [ 0.514290] fan PNP0C0B:00: registered as cooling_device0 [ 0.514294] ACPI: Fan [FAN0] (off) [ 0.514382] fan PNP0C0B:01: registered as cooling_device1 [ 0.514386] ACPI: Fan [FAN1] (off) [ 0.515056] ACPI: SSDT 7fd1aca0 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.515516] ACPI: SSDT 7fd19620 005C5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.516975] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843 [ 0.517434] Monitor-Mwait will be used to enter C-1 state [ 0.517453] Monitor-Mwait will be used to enter C-2 state [ 0.517469] Monitor-Mwait will be used to enter C-3 state [ 0.517475] Marking TSC unstable due to TSC halts in idle [ 0.521364] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.521405] processor LNXCPU:00: registered as cooling_device2 [ 0.521408] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.522093] ACPI: SSDT 7fd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.522426] ACPI: SSDT 7fd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.526132] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843 [ 0.530691] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.530729] processor LNXCPU:01: registered as cooling_device3 [ 0.530732] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.532613] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.532619] ACPI: Thermal Zone [TZ01] (46 C) [ 0.532804] isapnp: Scanning for PnP cards... [ 0.720058] ACPI: Battery Slot [BAT1] (battery present) [ 0.901687] isapnp: No Plug & Play device found [ 0.904277] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.904526] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 0.906305] brd: module loaded [ 0.907036] loop: module loaded [ 0.907164] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.907316] ahci 0000:00:1f.2: version 3.0 [ 0.907327] alloc irq_desc for 19 on node -1 [ 0.907329] alloc kstat_irqs on node -1 [ 0.907334] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.907363] alloc irq_desc for 28 on node -1 [ 0.907364] alloc kstat_irqs on node -1 [ 0.907373] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 0.907447] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.907450] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part [ 0.907455] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.907678] scsi0 : ahci [ 0.907793] scsi1 : ahci [ 0.907886] scsi2 : ahci [ 0.907977] scsi3 : ahci [ 0.908104] scsi4 : ahci [ 0.908195] scsi5 : ahci [ 0.908276] ata1: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 28 [ 0.908279] ata2: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304180 irq 28 [ 0.908281] ata3: DUMMY [ 0.908282] ata4: DUMMY [ 0.908284] ata5: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304300 irq 28 [ 0.908287] ata6: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304380 irq 28 [ 0.910066] Fixed MDIO Bus: probed [ 0.910071] PPP generic driver version 2.4.2 [ 0.910236] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.910238] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 0.910255] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.910265] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.910268] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.910316] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.910323] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.910328] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 0.910345] ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT [ 0.914248] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.914254] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.914256] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 0.914267] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc304800 [ 0.914271] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.918144] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.929012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.929042] usb usb1: default language 0x0409 [ 0.929048] usb usb1: udev 1, busnum 1, minor = 0 [ 0.929050] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.929051] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.929053] usb usb1: Product: EHCI Host Controller [ 0.929055] usb usb1: Manufacturer: Linux 2.6.31-2-generic ehci_hcd [ 0.929057] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.929089] usb usb1: uevent [ 0.929127] usb usb1: usb_probe_device [ 0.929130] usb usb1: configuration #1 chosen from 1 choice [ 0.929135] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.929147] usb 1-0:1.0: uevent [ 0.929180] hub 1-0:1.0: usb_probe_interface [ 0.929182] hub 1-0:1.0: usb_probe_interface - got id [ 0.929184] hub 1-0:1.0: USB hub found [ 0.929191] hub 1-0:1.0: 6 ports detected [ 0.929192] hub 1-0:1.0: standalone hub [ 0.929193] hub 1-0:1.0: no power switching (usb 1.0) [ 0.929195] hub 1-0:1.0: individual port over-current protection [ 0.929197] hub 1-0:1.0: power on to power good time: 20ms [ 0.929200] hub 1-0:1.0: local power source is good [ 0.929202] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.929251] alloc irq_desc for 20 on node -1 [ 0.929253] alloc kstat_irqs on node -1 [ 0.929257] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.929266] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.929269] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.929317] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.929323] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.929327] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 0.929342] ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT [ 0.933229] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.933235] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.933237] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 0.933248] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfc304c00 [ 0.933251] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.937128] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.949012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.949024] usb usb2: default language 0x0409 [ 0.949030] usb usb2: udev 1, busnum 2, minor = 128 [ 0.949032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.949034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.949036] usb usb2: Product: EHCI Host Controller [ 0.949037] usb usb2: Manufacturer: Linux 2.6.31-2-generic ehci_hcd [ 0.949039] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.949068] usb usb2: uevent [ 0.949103] usb usb2: usb_probe_device [ 0.949105] usb usb2: configuration #1 chosen from 1 choice [ 0.949110] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.949121] usb 2-0:1.0: uevent [ 0.949155] hub 2-0:1.0: usb_probe_interface [ 0.949156] hub 2-0:1.0: usb_probe_interface - got id [ 0.949158] hub 2-0:1.0: USB hub found [ 0.949163] hub 2-0:1.0: 6 ports detected [ 0.949164] hub 2-0:1.0: standalone hub [ 0.949166] hub 2-0:1.0: no power switching (usb 1.0) [ 0.949167] hub 2-0:1.0: individual port over-current protection [ 0.949169] hub 2-0:1.0: power on to power good time: 20ms [ 0.949172] hub 2-0:1.0: local power source is good [ 0.949174] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.949243] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.949245] ohci_hcd: block sizes: ed 64 td 64 [ 0.949287] uhci_hcd: USB Universal Host Controller Interface driver [ 0.949311] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.949317] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.949320] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.949366] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.949373] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.949377] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.949379] uhci_hcd 0000:00:1a.0: Performing full reset [ 0.949394] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 0.949405] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.949434] usb usb3: default language 0x0409 [ 0.949439] usb usb3: udev 1, busnum 3, minor = 256 [ 0.949441] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.949443] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.949445] usb usb3: Product: UHCI Host Controller [ 0.949446] usb usb3: Manufacturer: Linux 2.6.31-2-generic uhci_hcd [ 0.949448] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.949476] usb usb3: uevent [ 0.949508] usb usb3: usb_probe_device [ 0.949510] usb usb3: configuration #1 chosen from 1 choice [ 0.949514] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.949525] usb 3-0:1.0: uevent [ 0.949561] hub 3-0:1.0: usb_probe_interface [ 0.949563] hub 3-0:1.0: usb_probe_interface - got id [ 0.949564] hub 3-0:1.0: USB hub found [ 0.949570] hub 3-0:1.0: 2 ports detected [ 0.949571] hub 3-0:1.0: standalone hub [ 0.949573] hub 3-0:1.0: no power switching (usb 1.0) [ 0.949574] hub 3-0:1.0: individual port over-current protection [ 0.949576] hub 3-0:1.0: power on to power good time: 2ms [ 0.949579] hub 3-0:1.0: local power source is good [ 0.949581] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.949617] alloc irq_desc for 21 on node -1 [ 0.949619] alloc kstat_irqs on node -1 [ 0.949623] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.949628] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.949631] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.949676] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.949683] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.949687] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.949689] uhci_hcd 0000:00:1a.1: Performing full reset [ 0.949703] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 0.949714] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.949738] usb usb4: default language 0x0409 [ 0.949743] usb usb4: udev 1, busnum 4, minor = 384 [ 0.949745] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.949747] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.949749] usb usb4: Product: UHCI Host Controller [ 0.949750] usb usb4: Manufacturer: Linux 2.6.31-2-generic uhci_hcd [ 0.949752] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.949780] usb usb4: uevent [ 0.949811] usb usb4: usb_probe_device [ 0.949813] usb usb4: configuration #1 chosen from 1 choice [ 0.949817] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.949829] usb 4-0:1.0: uevent [ 0.949863] hub 4-0:1.0: usb_probe_interface [ 0.949865] hub 4-0:1.0: usb_probe_interface - got id [ 0.949867] hub 4-0:1.0: USB hub found [ 0.949872] hub 4-0:1.0: 2 ports detected [ 0.949873] hub 4-0:1.0: standalone hub [ 0.949874] hub 4-0:1.0: no power switching (usb 1.0) [ 0.949876] hub 4-0:1.0: individual port over-current protection [ 0.949878] hub 4-0:1.0: power on to power good time: 2ms [ 0.949881] hub 4-0:1.0: local power source is good [ 0.949882] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.949918] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.949923] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.949926] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.949974] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.949980] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.949985] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.949986] uhci_hcd 0000:00:1a.2: Performing full reset [ 0.950001] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 0.950004] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 [ 0.950030] usb usb5: default language 0x0409 [ 0.950035] usb usb5: udev 1, busnum 5, minor = 512 [ 0.950037] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.950039] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.950041] usb usb5: Product: UHCI Host Controller [ 0.950042] usb usb5: Manufacturer: Linux 2.6.31-2-generic uhci_hcd [ 0.950044] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.950072] usb usb5: uevent [ 0.950103] usb usb5: usb_probe_device [ 0.950105] usb usb5: configuration #1 chosen from 1 choice [ 0.950109] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.950121] usb 5-0:1.0: uevent [ 0.950158] hub 5-0:1.0: usb_probe_interface [ 0.950159] hub 5-0:1.0: usb_probe_interface - got id [ 0.950161] hub 5-0:1.0: USB hub found [ 0.950166] hub 5-0:1.0: 2 ports detected [ 0.950167] hub 5-0:1.0: standalone hub [ 0.950169] hub 5-0:1.0: no power switching (usb 1.0) [ 0.950170] hub 5-0:1.0: individual port over-current protection [ 0.950172] hub 5-0:1.0: power on to power good time: 2ms [ 0.950175] hub 5-0:1.0: local power source is good [ 0.950177] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.950212] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.950217] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.950220] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.950267] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.950273] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.950278] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.950280] uhci_hcd 0000:00:1d.0: Performing full reset [ 0.950294] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 0.950298] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860 [ 0.950324] usb usb6: default language 0x0409 [ 0.950329] usb usb6: udev 1, busnum 6, minor = 640 [ 0.950331] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.950333] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.950335] usb usb6: Product: UHCI Host Controller [ 0.950337] usb usb6: Manufacturer: Linux 2.6.31-2-generic uhci_hcd [ 0.950338] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.950367] usb usb6: uevent [ 0.950400] usb usb6: usb_probe_device [ 0.950402] usb usb6: configuration #1 chosen from 1 choice [ 0.950406] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 0.950419] usb 6-0:1.0: uevent [ 0.950452] hub 6-0:1.0: usb_probe_interface [ 0.950453] hub 6-0:1.0: usb_probe_interface - got id [ 0.950455] hub 6-0:1.0: USB hub found [ 0.950460] hub 6-0:1.0: 2 ports detected [ 0.950461] hub 6-0:1.0: standalone hub [ 0.950463] hub 6-0:1.0: no power switching (usb 1.0) [ 0.950464] hub 6-0:1.0: individual port over-current protection [ 0.950466] hub 6-0:1.0: power on to power good time: 2ms [ 0.950469] hub 6-0:1.0: local power source is good [ 0.950471] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 0.950505] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.950510] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.950513] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.950559] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.950565] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.950570] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.950572] uhci_hcd 0000:00:1d.1: Performing full reset [ 0.950586] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 0.950590] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 0.950615] usb usb7: default language 0x0409 [ 0.950620] usb usb7: udev 1, busnum 7, minor = 768 [ 0.950622] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.950624] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.950626] usb usb7: Product: UHCI Host Controller [ 0.950628] usb usb7: Manufacturer: Linux 2.6.31-2-generic uhci_hcd [ 0.950629] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.950658] usb usb7: uevent [ 0.950691] usb usb7: usb_probe_device [ 0.950693] usb usb7: configuration #1 chosen from 1 choice [ 0.950697] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 0.950708] usb 7-0:1.0: uevent [ 0.950740] hub 7-0:1.0: usb_probe_interface [ 0.950742] hub 7-0:1.0: usb_probe_interface - got id [ 0.950744] hub 7-0:1.0: USB hub found [ 0.950752] hub 7-0:1.0: 2 ports detected [ 0.950754] hub 7-0:1.0: standalone hub [ 0.950755] hub 7-0:1.0: no power switching (usb 1.0) [ 0.950756] hub 7-0:1.0: individual port over-current protection [ 0.950758] hub 7-0:1.0: power on to power good time: 2ms [ 0.950761] hub 7-0:1.0: local power source is good [ 0.950763] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 0.950797] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.950803] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.950806] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.950851] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.950858] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.950862] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.950864] uhci_hcd 0000:00:1d.2: Performing full reset [ 0.950879] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 0.950889] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 0.950914] usb usb8: default language 0x0409 [ 0.950919] usb usb8: udev 1, busnum 8, minor = 896 [ 0.950921] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.950923] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.950925] usb usb8: Product: UHCI Host Controller [ 0.950926] usb usb8: Manufacturer: Linux 2.6.31-2-generic uhci_hcd [ 0.950928] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.950958] usb usb8: uevent [ 0.950989] usb usb8: usb_probe_device [ 0.950991] usb usb8: configuration #1 chosen from 1 choice [ 0.950995] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 0.951007] usb 8-0:1.0: uevent [ 0.951039] hub 8-0:1.0: usb_probe_interface [ 0.951041] hub 8-0:1.0: usb_probe_interface - got id [ 0.951042] hub 8-0:1.0: USB hub found [ 0.951047] hub 8-0:1.0: 2 ports detected [ 0.951049] hub 8-0:1.0: standalone hub [ 0.951050] hub 8-0:1.0: no power switching (usb 1.0) [ 0.951051] hub 8-0:1.0: individual port over-current protection [ 0.951053] hub 8-0:1.0: power on to power good time: 2ms [ 0.951056] hub 8-0:1.0: local power source is good [ 0.951058] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 0.951200] usbcore: registered new interface driver usbserial [ 0.951236] USB Serial support registered for generic [ 0.951276] usbcore: registered new interface driver usbserial_generic [ 0.951278] usbserial: USB Serial Driver core [ 0.951370] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.951390] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 0.959870] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.963185] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.963189] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.963191] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.963193] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.963196] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.963360] mice: PS/2 mouse device common for all mice [ 0.963581] rtc_cmos 00:06: RTC can wake from S4 [ 0.963629] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.963657] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.963804] device-mapper: uevent: version 1.0.3 [ 0.963912] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.963968] device-mapper: multipath: version 1.1.0 loaded [ 0.963970] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.964147] EISA: Probing bus 0 at eisa.0 [ 0.964152] Cannot allocate resource for EISA slot 1 [ 0.964154] Cannot allocate resource for EISA slot 2 [ 0.964156] Cannot allocate resource for EISA slot 3 [ 0.964158] Cannot allocate resource for EISA slot 4 [ 0.964159] Cannot allocate resource for EISA slot 5 [ 0.964171] EISA: Detected 0 cards. [ 0.964501] cpuidle: using governor ladder [ 0.965041] cpuidle: using governor menu [ 0.965659] TCP cubic registered [ 0.966031] NET: Registered protocol family 10 [ 0.966371] lo: Disabled Privacy Extensions [ 0.966626] NET: Registered protocol family 17 [ 0.966699] Bluetooth: L2CAP ver 2.13 [ 0.966700] Bluetooth: L2CAP socket layer initialized [ 0.966702] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.966703] Bluetooth: SCO socket layer initialized [ 0.966720] Bluetooth: RFCOMM socket layer initialized [ 0.966723] Bluetooth: RFCOMM TTY layer initialized [ 0.966724] Bluetooth: RFCOMM ver 1.11 [ 0.971652] Using IPI No-Shortcut mode [ 0.971829] PM: Resume from disk failed. [ 0.971843] registered taskstats version 1 [ 0.971926] Magic number: 1:408:965 [ 0.972010] rtc_cmos 00:06: setting system clock to 2009-07-10 02:58:04 UTC (1247194684) [ 0.972014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.972015] EDD information not available. [ 0.976052] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.029055] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 1.029060] hub 1-0:1.0: port 3: status 0501 change 0001 [ 1.029075] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT [ 1.029079] hub 1-0:1.0: port 6: status 0501 change 0001 [ 1.048053] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT [ 1.048058] hub 2-0:1.0: port 2: status 0501 change 0001 [ 1.048096] uhci_hcd 0000:00:1a.1: port 1 portsc 008a,00 [ 1.048123] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.048129] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00 [ 1.048144] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00 [ 1.048182] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.048185] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.128073] hub 1-0:1.0: state 7 ports 6 chg 0048 evt 0000 [ 1.128081] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 1.184298] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion [ 1.184301] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT [ 1.184303] hub 1-0:1.0: port 3 not reset yet, waiting 50ms [ 1.224088] ata5: SATA link down (SStatus 0 SControl 300) [ 1.224119] ata6: SATA link down (SStatus 0 SControl 300) [ 1.240049] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 1.240074] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 1.296297] ehci_hcd 0000:00:1a.7: port 6 high speed [ 1.296300] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT [ 1.352049] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.388063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.388083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.401878] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD16, max UDMA/100 [ 1.415653] ata2.00: configured for UDMA/100 [ 1.428296] ehci_hcd 0000:00:1a.7: port 6 high speed [ 1.428299] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT [ 1.446198] ata1.00: ATA-8: WDC WD3200BEVT-75ZCT2, 11.01A11, max UDMA/133 [ 1.446202] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.448795] ata1.00: configured for UDMA/133 [ 1.448917] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 11.0 PQ: 0 ANSI: 5 [ 1.449207] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.449227] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.449242] sd 0:0:0:0: [sda] Write Protect is off [ 1.449244] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.449261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.449356] sda: [ 1.451580] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640S HD16 PQ: 0 ANSI: 5 [ 1.458315] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 1.458318] Uniform CD-ROM driver Revision: 3.20 [ 1.458514] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.458559] sda1 sda2 sda3 sda4 < [ 1.458673] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.486738] sda5 > [ 1.487502] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.487525] Freeing unused kernel memory: 536k freed [ 1.487774] Write protecting the kernel text: 4600k [ 1.487823] Write protecting the kernel read-only data: 1832k [ 1.504012] Clocksource tsc unstable (delta = -352714417 ns) [ 1.549894] Linux agpgart interface v0.103 [ 1.573314] acpi device:03: registered as cooling_device4 [ 1.573454] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5 [ 1.573506] ACPI: Video Device [ATID] (multi-head: yes rom: no post: no) [ 1.585781] usb 1-6: skipped 2 descriptors after configuration [ 1.585784] usb 1-6: skipped 6 descriptors after interface [ 1.585787] usb 1-6: skipped 1 descriptor after endpoint [ 1.585789] usb 1-6: skipped 24 descriptors after interface [ 1.586463] usb 1-6: default language 0x0409 [ 1.586641] [drm] Initialized drm 1.1.0 20060810 [ 1.591821] usb 1-6: udev 3, busnum 1, minor = 2 [ 1.591823] usb 1-6: New USB device found, idVendor=0c45, idProduct=6407 [ 1.591825] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.591827] usb 1-6: Product: Laptop_Integrated_Webcam_2M [ 1.591828] usb 1-6: Manufacturer: 00000000000000000000 [ 1.591868] usb 1-6: uevent [ 1.594459] usb 1-6: usb_probe_device [ 1.594461] usb 1-6: configuration #1 chosen from 1 choice [ 1.594813] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 1.598355] usb 1-6:1.0: uevent [ 1.598425] usbserial_generic 1-6:1.0: usb_probe_interface [ 1.598427] usbserial_generic 1-6:1.0: usb_probe_interface - got id [ 1.598440] usb 1-6: adding 1-6:1.1 (config #1, interface 1) [ 1.598455] usb 1-6:1.1: uevent [ 1.598509] usbserial_generic 1-6:1.1: usb_probe_interface [ 1.598511] usbserial_generic 1-6:1.1: usb_probe_interface - got id [ 1.598528] hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 1.598535] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.598541] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion [ 1.653050] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 1.653077] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 1.653087] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 [ 1.653093] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 1.736209] usb usb3: uevent [ 1.736224] usb 3-0:1.0: uevent [ 1.736260] usb usb4: uevent [ 1.736274] usb 4-0:1.0: uevent [ 1.736311] usb usb5: uevent [ 1.736324] usb 5-0:1.0: uevent [ 1.736360] usb usb1: uevent [ 1.736373] usb 1-0:1.0: uevent [ 1.736388] usb 1-6: uevent [ 1.736401] usb 1-6:1.0: uevent [ 1.736415] usb 1-6:1.1: uevent [ 1.736628] usb usb6: uevent [ 1.736641] usb 6-0:1.0: uevent [ 1.736676] usb usb7: uevent [ 1.736690] usb 7-0:1.0: uevent [ 1.736725] usb usb8: uevent [ 1.736738] usb 8-0:1.0: uevent [ 1.736775] usb usb2: uevent [ 1.736788] usb 2-0:1.0: uevent [ 1.779732] tg3.c:v3.99 (April 20, 2009) [ 1.779903] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.779916] tg3 0000:02:00.0: setting latency timer to 64 [ 1.781045] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 1.785532] tg3 0000:02:00.0: wake-up capability disabled by ACPI [ 1.785543] tg3 0000:02:00.0: PME# disabled [ 1.814645] b43-pci-bridge 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.814661] b43-pci-bridge 0000:06:00.0: setting latency timer to 64 [ 1.889362] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0 [ 1.893039] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 2.025044] usb 4-1: ep0 maxpacket = 8 [ 2.051773] usb 4-1: default language 0x0409 [ 2.066769] usb 4-1: udev 2, busnum 4, minor = 385 [ 2.066773] usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 2.066776] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.066779] usb 4-1: Product: BCM2046B1 [ 2.066781] usb 4-1: Manufacturer: Broadcom [ 2.066855] usb 4-1: uevent [ 2.066867] usb 4-1: usb_probe_device [ 2.066870] usb 4-1: configuration #1 chosen from 1 choice [ 2.068771] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 2.068794] usb 4-1:1.0: uevent [ 2.068812] hub 4-1:1.0: usb_probe_interface [ 2.068814] hub 4-1:1.0: usb_probe_interface - got id [ 2.068817] hub 4-1:1.0: USB hub found [ 2.070769] hub 4-1:1.0: 3 ports detected [ 2.070772] hub 4-1:1.0: compound device; port removable status: FFF [ 2.070775] hub 4-1:1.0: ganged power switching [ 2.070777] hub 4-1:1.0: global over-current protection [ 2.070780] hub 4-1:1.0: power on to power good time: 100ms [ 2.072761] hub 4-1:1.0: local power source is good [ 2.072763] hub 4-1:1.0: no over-current condition exists [ 2.072765] hub 4-1:1.0: enabling power on all ports [ 2.075805] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.075812] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 2.075822] uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00 [ 2.075830] hub 6-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 2.137046] usb usb3: suspend_rh (auto-stop) [ 2.137075] usb usb7: suspend_rh (auto-stop) [ 2.137102] usb usb8: suspend_rh (auto-stop) [ 2.173770] hub 4-1:1.0: port 1: status 0101 change 0001 [ 2.175768] hub 4-1:1.0: port 2: status 0101 change 0001 [ 2.200045] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 2.276051] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 2.309324] eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:24:e8:81:b6:cb [ 2.309327] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.309329] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.309331] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.316041] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 2.342791] PM: Starting manual resume from disk [ 2.342794] PM: Resume from partition 8:5 [ 2.342795] PM: Checking hibernation image. [ 2.342970] PM: Resume from disk failed. [ 2.373185] kjournald starting. Commit interval 5 seconds [ 2.373192] EXT3-fs: mounted filesystem with writeback data mode. [ 2.385048] usb usb5: suspend_rh (auto-stop) [ 2.471359] usb 6-2: skipped 1 descriptor after interface [ 2.476344] usb 6-2: default language 0x0409 [ 2.488357] usb 6-2: udev 2, busnum 6, minor = 641 [ 2.488361] usb 6-2: New USB device found, idVendor=413c, idProduct=3016 [ 2.488364] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.488368] usb 6-2: Product: Dell Premium USB Optical Mouse [ 2.488444] usb 6-2: uevent [ 2.488455] usb 6-2: usb_probe_device [ 2.488457] usb 6-2: configuration #1 chosen from 1 choice [ 2.491357] usb 6-2: adding 6-2:1.0 (config #1, interface 0) [ 2.491381] usb 6-2:1.0: uevent [ 2.491395] usbserial_generic 6-2:1.0: usb_probe_interface [ 2.491398] usbserial_generic 6-2:1.0: usb_probe_interface - got id [ 2.491438] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 2.491444] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 2.491450] hub 4-1:1.0: state 7 ports 3 chg 0006 evt 0000 [ 2.492769] hub 4-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 2.565775] usb 4-1.1: new full speed USB device using uhci_hcd and address 3 [ 2.661052] usb 4-1.1: ep0 maxpacket = 8 [ 2.685777] usb 4-1.1: skipped 1 descriptor after interface [ 2.685781] usb 4-1.1: udev 3, busnum 4, minor = 386 [ 2.685784] usb 4-1.1: New USB device found, idVendor=413c, idProduct=8161 [ 2.685787] usb 4-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.685850] usb 4-1.1: uevent [ 2.685859] usb 4-1.1: usb_probe_device [ 2.685861] usb 4-1.1: configuration #1 chosen from 1 choice [ 2.687774] usb 4-1.1: adding 4-1.1:1.0 (config #1, interface 0) [ 2.687794] usb 4-1.1:1.0: uevent [ 2.687808] usbserial_generic 4-1.1:1.0: usb_probe_interface [ 2.687810] usbserial_generic 4-1.1:1.0: usb_probe_interface - got id [ 2.689775] hub 4-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 2.765769] usb 4-1.2: new full speed USB device using uhci_hcd and address 4 [ 2.861068] usb 4-1.2: ep0 maxpacket = 8 [ 2.888776] usb 4-1.2: skipped 1 descriptor after interface [ 2.888780] usb 4-1.2: skipped 1 descriptor after endpoint [ 2.888784] usb 4-1.2: udev 4, busnum 4, minor = 387 [ 2.888786] usb 4-1.2: New USB device found, idVendor=413c, idProduct=8162 [ 2.888790] usb 4-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.888850] usb 4-1.2: uevent [ 2.888858] usb 4-1.2: usb_probe_device [ 2.888860] usb 4-1.2: configuration #1 chosen from 1 choice [ 2.890789] usb 4-1.2: adding 4-1.2:1.0 (config #1, interface 0) [ 2.890810] usb 4-1.2:1.0: uevent [ 2.890823] usbserial_generic 4-1.2:1.0: usb_probe_interface [ 2.890826] usbserial_generic 4-1.2:1.0: usb_probe_interface - got id [ 2.890859] hub 4-1:1.0: state 7 ports 3 chg 0000 evt 0004 [ 3.816049] hub 3-0:1.0: hub_suspend [ 3.816057] usb usb3: bus auto-suspend [ 3.816060] usb usb3: suspend_rh [ 3.816078] hub 7-0:1.0: hub_suspend [ 3.816082] usb usb7: bus auto-suspend [ 3.816085] usb usb7: suspend_rh [ 3.816102] hub 8-0:1.0: hub_suspend [ 3.816106] usb usb8: bus auto-suspend [ 3.816108] usb usb8: suspend_rh [ 4.805064] hub 2-0:1.0: hub_suspend [ 4.805072] usb usb2: bus auto-suspend [ 4.805075] ehci_hcd 0000:00:1d.7: suspend root hub [ 4.816045] hub 5-0:1.0: hub_suspend [ 4.816050] usb usb5: bus auto-suspend [ 4.816053] usb usb5: suspend_rh [ 8.591740] udev: starting version 144 [ 8.645762] usb usb3: uevent [ 8.645805] usb 3-0:1.0: uevent [ 8.645924] usb usb4: uevent [ 8.645965] usb 4-0:1.0: uevent [ 8.646007] usb 4-1: uevent [ 8.646083] usb 4-1.1: uevent [ 8.646126] usb 4-1.1:1.0: uevent [ 8.646167] usb 4-1.2: uevent [ 8.646209] usb 4-1.2:1.0: uevent [ 8.646248] usb 4-1:1.0: uevent [ 8.646358] usb usb5: uevent [ 8.646398] usb 5-0:1.0: uevent [ 8.646514] usb usb1: uevent [ 8.646555] usb 1-0:1.0: uevent [ 8.646596] usb 1-6: uevent [ 8.646637] usb 1-6:1.0: uevent [ 8.646676] usb 1-6:1.1: uevent [ 8.647426] usb usb6: uevent [ 8.647467] usb 6-0:1.0: uevent [ 8.647508] usb 6-2: uevent [ 8.647554] usb 6-2:1.0: uevent [ 8.647665] usb usb7: uevent [ 8.647705] usb 7-0:1.0: uevent [ 8.647815] usb usb8: uevent [ 8.647855] usb 8-0:1.0: uevent [ 8.647965] usb usb2: uevent [ 8.648017] usb 2-0:1.0: uevent [ 8.657525] usb usb3: uevent [ 8.661364] usb usb2: uevent [ 8.668456] usb usb4: uevent [ 8.671255] usb usb1: uevent [ 8.672247] usb usb5: uevent [ 8.678437] usb usb6: uevent [ 8.679048] usb usb7: uevent [ 8.681257] usb usb8: uevent [ 8.686187] usb 4-1: uevent [ 8.686349] usb 1-6: uevent [ 8.687962] usb 6-2: uevent [ 8.707347] usb 4-1.1: uevent [ 8.717793] usb 4-1.2: uevent [ 8.754276] usb usb7: usb auto-resume [ 8.754280] usb usb7: wakeup_rh [ 8.792045] hub 7-0:1.0: hub_resume [ 8.792091] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.792136] usb usb8: usb auto-resume [ 8.792138] usb usb8: wakeup_rh [ 8.832087] hub 8-0:1.0: hub_resume [ 8.832131] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.832156] usb usb2: usb auto-resume [ 8.832160] ehci_hcd 0000:00:1d.7: resume root hub [ 8.878938] iTCO_vendor_support: vendor-support=0 [ 8.884041] hub 2-0:1.0: hub_resume [ 8.884090] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 8.884178] usb usb5: usb auto-resume [ 8.884180] usb usb5: wakeup_rh [ 8.885608] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.924040] hub 5-0:1.0: hub_resume [ 8.924084] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.924213] usb usb3: usb auto-resume [ 8.924216] usb usb3: wakeup_rh [ 8.964050] hub 3-0:1.0: hub_resume [ 8.964099] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.078778] hub 4-1:1.0: state 7 ports 3 chg 0000 evt 0008 [ 9.081087] hub 4-1:1.0: port 3, status 0101, change 0001, 12 Mb/s [ 9.102465] usbcore: registered new interface driver hiddev [ 9.102477] usbhid 6-2:1.0: usb_probe_interface [ 9.102479] usbhid 6-2:1.0: usb_probe_interface - got id [ 9.119579] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input6 [ 9.119645] generic-usb 0003:413C:3016.0001: input,hidraw0: USB HID v11.10 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 9.119653] usbhid 4-1.1:1.0: usb_probe_interface [ 9.119655] usbhid 4-1.1:1.0: usb_probe_interface - got id [ 9.122971] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input7 [ 9.122979] uhci_hcd 0000:00:1a.1: reserve dev 3 ep81-INT, period 8, phase 4, 17 us [ 9.123015] generic-usb 0003:413C:8161.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.1-1.1/input0 [ 9.123022] usbhid 4-1.2:1.0: usb_probe_interface [ 9.123024] usbhid 4-1.2:1.0: usb_probe_interface - got id [ 9.125517] usb 4-1.1:1.0: uevent [ 9.125589] usb 4-1.1: uevent [ 9.126399] usb 4-1.1:1.0: uevent [ 9.127006] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.2/4-1.2:1.0/input/input8 [ 9.127064] generic-usb 0003:413C:8162.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.1-1.2/input0 [ 9.127078] usbcore: registered new interface driver usbhid [ 9.127080] usbhid: v2.6:USB HID core driver [ 9.190766] Platform driver 'pcspkr' needs updating - please use dev_pm_ops [ 9.190816] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 9.218774] hub 4-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 [ 9.266185] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 9.266258] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 9.266315] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.289777] usb 4-1.3: new full speed USB device using uhci_hcd and address 5 [ 9.421795] usb 4-1.3: skipped 1 descriptor after interface [ 9.424785] usb 4-1.3: default language 0x0409 [ 9.435768] usb 4-1.3: udev 5, busnum 4, minor = 388 [ 9.435771] usb 4-1.3: New USB device found, idVendor=413c, idProduct=8160 [ 9.435774] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.435777] usb 4-1.3: Product: Dell Wireless 365 Bluetooth Module [ 9.435780] usb 4-1.3: Manufacturer: Dell Computer Corp [ 9.435858] usb 4-1.3: uevent [ 9.435873] usb 4-1.3: usb_probe_device [ 9.435876] usb 4-1.3: configuration #1 chosen from 1 choice [ 9.436641] usb 4-1.3: uevent [ 9.438810] usb 4-1.3: adding 4-1.3:1.0 (config #1, interface 0) [ 9.438834] usb 4-1.3:1.0: uevent [ 9.438857] usbserial_generic 4-1.3:1.0: usb_probe_interface [ 9.438859] usbserial_generic 4-1.3:1.0: usb_probe_interface - got id [ 9.438887] usb 4-1.3: adding 4-1.3:1.1 (config #1, interface 1) [ 9.438900] usb 4-1.3:1.1: uevent [ 9.438910] usbserial_generic 4-1.3:1.1: usb_probe_interface [ 9.438912] usbserial_generic 4-1.3:1.1: usb_probe_interface - got id [ 9.438938] usb 4-1.3: adding 4-1.3:1.2 (config #1, interface 2) [ 9.438952] usb 4-1.3:1.2: uevent [ 9.438961] usbserial_generic 4-1.3:1.2: usb_probe_interface [ 9.438963] usbserial_generic 4-1.3:1.2: usb_probe_interface - got id [ 9.438980] usb 4-1.3: adding 4-1.3:1.3 (config #1, interface 3) [ 9.438994] usb 4-1.3:1.3: uevent [ 9.439003] usbserial_generic 4-1.3:1.3: usb_probe_interface [ 9.439005] usbserial_generic 4-1.3:1.3: usb_probe_interface - got id [ 9.439020] hub 4-1:1.0: state 7 ports 3 chg 0000 evt 0008 [ 9.583083] usb 6-2:1.0: uevent [ 9.583159] usb 6-2: uevent [ 9.583728] usb 6-2:1.0: uevent [ 9.583792] usb 6-2: uevent [ 9.583945] usb 6-2:1.0: uevent [ 9.585101] usb 6-2:1.0: uevent [ 9.588118] usb 4-1.2:1.0: uevent [ 9.588189] usb 4-1.2: uevent [ 9.588753] usb 4-1.2:1.0: uevent [ 9.588819] usb 4-1.2: uevent [ 9.588982] usb 4-1.2:1.0: uevent [ 9.589633] usb 4-1.2:1.0: uevent [ 9.820649] [drm] radeon default to kernel modesetting DISABLED. [ 9.821385] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.821390] pci 0000:01:00.0: setting latency timer to 64 [ 9.821534] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 [ 9.824080] usb usb7: suspend_rh (auto-stop) [ 9.824108] usb usb8: suspend_rh (auto-stop) [ 9.833768] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 10.055232] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 10.055254] btusb 4-1.3:1.0: usb_probe_interface [ 10.055257] btusb 4-1.3:1.0: usb_probe_interface - got id [ 10.055316] btusb 4-1.3:1.2: usb_probe_interface [ 10.055317] btusb 4-1.3:1.2: usb_probe_interface - got id [ 10.055325] btusb 4-1.3:1.3: usb_probe_interface [ 10.055326] btusb 4-1.3:1.3: usb_probe_interface - got id [ 10.055339] usbcore: registered new interface driver btusb [ 10.068778] Linux video capture interface: v2.00 [ 10.072059] usb usb5: suspend_rh (auto-stop) [ 10.072087] usb usb3: suspend_rh (auto-stop) [ 10.084087] cfg80211: Calling CRDA to update world regulatory domain [ 10.214506] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 10.260213] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11 [ 10.342336] uvcvideo 1-6:1.0: usb_probe_interface [ 10.342339] uvcvideo 1-6:1.0: usb_probe_interface - got id [ 10.342351] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6407) [ 10.353430] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12 [ 10.353480] usbcore: registered new interface driver uvcvideo [ 10.353482] USB Video Class driver (v0.1.0) [ 10.539487] usb 1-6:1.0: uevent [ 10.539562] usb 1-6: uevent [ 10.540446] usb 1-6:1.0: uevent [ 10.548536] usb 1-6: link qh4-0001/f6bd8100 start 1 [1/0 us] [ 10.548578] usb 1-6: unlink qh4-0001/f6bd8100 start 1 [1/0 us] [ 10.549269] usb 1-6:1.0: uevent [ 10.549334] usb 1-6: uevent [ 10.550082] usb 1-6:1.0: uevent [ 10.599401] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 10.641246] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1) [ 10.641282] b43: probe of ssb0:0 failed with error -95 [ 10.641299] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 10.743177] cfg80211: World regulatory domain updated: [ 10.743180] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.743182] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.743185] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.743187] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.743189] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.743191] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.805067] hub 7-0:1.0: hub_suspend [ 10.805076] usb usb7: bus auto-suspend [ 10.805079] usb usb7: suspend_rh [ 10.878182] alloc irq_desc for 22 on node -1 [ 10.878185] alloc kstat_irqs on node -1 [ 10.878190] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.878228] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.003784] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.003817] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 11.300571] lp: driver loaded but no devices found [ 11.455700] Adding 2008084k swap on /dev/sda5. Priority:-1 extents:1 across:2008084k [ 11.805031] hub 2-0:1.0: hub_suspend [ 11.805038] usb usb2: bus auto-suspend [ 11.805040] ehci_hcd 0000:00:1d.7: suspend root hub [ 11.805062] hub 3-0:1.0: hub_suspend [ 11.805065] usb usb3: bus auto-suspend [ 11.805067] usb usb3: suspend_rh [ 11.816035] hub 8-0:1.0: hub_suspend [ 11.816038] usb usb8: bus auto-suspend [ 11.816039] usb usb8: suspend_rh [ 11.816054] hub 5-0:1.0: hub_suspend [ 11.816056] usb usb5: bus auto-suspend [ 11.816057] usb usb5: suspend_rh [ 12.004041] EXT3 FS on sda3, internal journal [ 12.140026] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x002ba000 [ 15.514240] usb usb3: uevent [ 15.514312] usb 3-0:1.0: uevent [ 15.514422] usb usb4: uevent [ 15.514494] usb 4-0:1.0: uevent [ 15.514534] usb 4-1: uevent [ 15.514602] usb 4-1.1: uevent [ 15.514670] usb 4-1.1:1.0: uevent [ 15.514917] usb 4-1.2: uevent [ 15.514985] usb 4-1.2:1.0: uevent [ 15.515292] usb 4-1.3: uevent [ 15.515365] usb 4-1.3:1.0: uevent [ 15.515472] usb 4-1.3:1.1: uevent [ 15.515512] usb 4-1.3:1.2: uevent [ 15.515550] usb 4-1.3:1.3: uevent [ 15.515588] usb 4-1:1.0: uevent [ 15.515696] usb usb5: uevent [ 15.515765] usb 5-0:1.0: uevent [ 15.515878] usb usb1: uevent [ 15.515947] usb 1-0:1.0: uevent [ 15.515987] usb 1-6: uevent [ 15.516055] usb 1-6:1.0: uevent [ 15.516285] usb 1-6:1.1: uevent [ 15.517286] usb usb6: uevent [ 15.517356] usb 6-0:1.0: uevent [ 15.517399] usb 6-2: uevent [ 15.517467] usb 6-2:1.0: uevent [ 15.517847] usb usb7: uevent [ 15.517917] usb 7-0:1.0: uevent [ 15.518026] usb usb8: uevent [ 15.518095] usb 8-0:1.0: uevent [ 15.518203] usb usb2: uevent [ 15.518275] usb 2-0:1.0: uevent [ 15.665251] ehci_hcd 0000:00:1a.7: reused qh f6bd8100 schedule [ 15.665255] usb 1-6: link qh4-0001/f6bd8100 start 1 [1/0 us] [ 15.739715] usb 1-6: unlink qh4-0001/f6bd8100 start 1 [1/0 us] [ 17.530157] ppdev: user-space parallel port driver [ 17.983604] [drm] Setting GART location based on new memory map [ 17.999496] [drm] Loading RV710 PFP Microcode [ 17.999536] [drm] Loading RV710 CP Microcode [ 18.016172] [drm] Resetting GPU [ 18.016228] [drm] writeback test succeeded in 1 usecs [ 20.005108] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 106 us [ 20.017067] uhci_hcd 0000:00:1a.1: reserve dev 4 ep81-INT, period 8, phase 4, 14 us [ 20.363945] usb usb1: uevent [ 20.364041] usb 1-0:1.0: uevent [ 20.364091] usb usb2: uevent [ 20.364165] usb 2-0:1.0: uevent [ 20.364212] usb usb3: uevent [ 20.364285] usb 3-0:1.0: uevent [ 20.364333] usb usb4: uevent [ 20.364408] usb 4-0:1.0: uevent [ 20.364454] usb usb5: uevent [ 20.364524] usb 5-0:1.0: uevent [ 20.364571] usb usb6: uevent [ 20.364643] usb 6-0:1.0: uevent [ 20.364688] usb usb7: uevent [ 20.364759] usb 7-0:1.0: uevent [ 20.364806] usb usb8: uevent [ 20.364878] usb 8-0:1.0: uevent [ 20.364924] usb 1-6: uevent [ 20.364995] usb 1-6:1.0: uevent [ 20.365046] usb 1-6:1.1: uevent [ 20.365093] usb 4-1: uevent [ 20.365165] usb 4-1:1.0: uevent [ 20.365212] usb 6-2: uevent [ 20.365283] usb 6-2:1.0: uevent [ 20.365331] usb 4-1.1: uevent [ 20.365403] usb 4-1.1:1.0: uevent [ 20.365452] usb 4-1.2: uevent [ 20.365524] usb 4-1.2:1.0: uevent [ 20.365571] usb 4-1.3: uevent [ 20.365644] usb 4-1.3:1.0: uevent [ 20.365691] usb 4-1.3:1.1: uevent [ 20.365737] usb 4-1.3:1.2: uevent [ 20.365782] usb 4-1.3:1.3: uevent [ 21.472340] tg3 0000:02:00.0: wake-up capability disabled by ACPI [ 21.472350] tg3 0000:02:00.0: PME# disabled [ 21.472470] alloc irq_desc for 29 on node -1 [ 21.472472] alloc kstat_irqs on node -1 [ 21.472491] tg3 0000:02:00.0: irq 29 for MSI/MSI-X [ 21.622383] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.175749] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 23.175752] tg3: eth0: Flow control is off for TX and off for RX. [ 23.175898] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.157603] usb usb3: uevent [ 24.157741] usb 3-0:1.0: uevent [ 24.157823] usb usb4: uevent [ 24.157958] usb 4-0:1.0: uevent [ 24.158040] usb 4-1: uevent [ 24.158174] usb 4-1.1: uevent [ 24.158306] usb 4-1.1:1.0: uevent [ 24.158634] usb 4-1.2: uevent [ 24.158768] usb 4-1.2:1.0: uevent [ 24.159235] usb 4-1.3: uevent [ 24.159375] usb 4-1.3:1.0: uevent [ 24.159458] usb 4-1.3:1.1: uevent [ 24.159540] usb 4-1.3:1.2: uevent [ 24.159619] usb 4-1.3:1.3: uevent [ 24.159700] usb 4-1:1.0: uevent [ 24.159781] usb usb5: uevent [ 24.159919] usb 5-0:1.0: uevent [ 24.160003] usb usb1: uevent [ 24.160140] usb 1-0:1.0: uevent [ 24.160221] usb 1-6: uevent [ 24.160358] usb 1-6:1.0: uevent [ 24.160664] usb 1-6:1.1: uevent [ 24.160747] usb usb6: uevent [ 24.165951] usb 6-0:1.0: uevent [ 24.166035] usb 6-2: uevent [ 24.166170] usb 6-2:1.0: uevent [ 24.166805] usb usb7: uevent [ 24.166946] usb 7-0:1.0: uevent [ 24.167033] usb usb8: uevent [ 24.167171] usb 8-0:1.0: uevent [ 24.167253] usb usb2: uevent [ 24.167408] usb 2-0:1.0: uevent [ 24.785248] usb usb7: usb auto-resume [ 24.785252] usb usb7: wakeup_rh [ 24.825042] hub 7-0:1.0: hub_resume [ 24.825088] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 24.825119] usb usb8: usb auto-resume [ 24.825121] usb usb8: wakeup_rh [ 24.865040] hub 8-0:1.0: hub_resume [ 24.865083] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 24.865111] usb usb2: usb auto-resume [ 24.865121] ehci_hcd 0000:00:1d.7: resume root hub [ 24.917042] hub 2-0:1.0: hub_resume [ 24.917089] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 24.917168] usb usb5: usb auto-resume [ 24.917170] usb usb5: wakeup_rh [ 24.957047] hub 5-0:1.0: hub_resume [ 24.957097] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 24.957246] usb usb3: usb auto-resume [ 24.957249] usb usb3: wakeup_rh [ 24.996039] hub 3-0:1.0: hub_resume [ 24.996058] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 25.944072] usb usb7: suspend_rh (auto-stop) [ 25.944101] usb usb8: suspend_rh (auto-stop) [ 25.944129] usb usb5: suspend_rh (auto-stop) [ 26.192075] usb usb3: suspend_rh (auto-stop) [ 27.805046] hub 3-0:1.0: hub_suspend [ 27.805057] usb usb3: bus auto-suspend [ 27.805061] usb usb3: suspend_rh [ 27.820062] hub 7-0:1.0: hub_suspend [ 27.820074] usb usb7: bus auto-suspend [ 27.820077] usb usb7: suspend_rh [ 27.820096] hub 8-0:1.0: hub_suspend [ 27.820099] usb usb8: bus auto-suspend [ 27.820100] usb usb8: suspend_rh [ 27.820119] hub 2-0:1.0: hub_suspend [ 27.820121] usb usb2: bus auto-suspend [ 27.820124] ehci_hcd 0000:00:1d.7: suspend root hub [ 27.820155] hub 5-0:1.0: hub_suspend [ 27.820157] usb usb5: bus auto-suspend [ 27.820159] usb usb5: suspend_rh [ 30.798080] usb usb1: uevent [ 30.798162] usb 1-0:1.0: uevent [ 30.798209] usb usb2: uevent [ 30.798280] usb 2-0:1.0: uevent [ 30.798326] usb usb3: uevent [ 30.798397] usb 3-0:1.0: uevent [ 30.798443] usb usb4: uevent [ 30.798514] usb 4-0:1.0: uevent [ 30.798560] usb usb5: uevent [ 30.798631] usb 5-0:1.0: uevent [ 30.798677] usb usb6: uevent [ 30.798748] usb 6-0:1.0: uevent [ 30.798793] usb usb7: uevent [ 30.798864] usb 7-0:1.0: uevent [ 30.798909] usb usb8: uevent [ 30.798980] usb 8-0:1.0: uevent [ 30.799026] usb 1-6: uevent [ 30.799098] usb 1-6:1.0: uevent [ 30.799145] usb 1-6:1.1: uevent [ 30.799193] usb 4-1: uevent [ 30.799265] usb 4-1:1.0: uevent [ 30.799312] usb 6-2: uevent [ 30.799384] usb 6-2:1.0: uevent [ 30.799432] usb 4-1.1: uevent [ 30.799504] usb 4-1.1:1.0: uevent [ 30.799553] usb 4-1.2: uevent [ 30.799624] usb 4-1.2:1.0: uevent [ 30.799673] usb 4-1.3: uevent [ 30.799746] usb 4-1.3:1.0: uevent [ 30.799794] usb 4-1.3:1.1: uevent [ 30.799843] usb 4-1.3:1.2: uevent [ 30.799889] usb 4-1.3:1.3: uevent [ 31.245107] usb usb1: uevent [ 31.245186] usb 1-0:1.0: uevent [ 31.245235] usb usb2: uevent [ 31.245309] usb 2-0:1.0: uevent [ 31.245357] usb usb3: uevent [ 31.245430] usb 3-0:1.0: uevent [ 31.245478] usb usb4: uevent [ 31.245552] usb 4-0:1.0: uevent [ 31.245598] usb usb5: uevent [ 31.245669] usb 5-0:1.0: uevent [ 31.245716] usb usb6: uevent [ 31.245789] usb 6-0:1.0: uevent [ 31.245834] usb usb7: uevent [ 31.245906] usb 7-0:1.0: uevent [ 31.245953] usb usb8: uevent [ 31.246026] usb 8-0:1.0: uevent [ 31.246072] usb 1-6: uevent [ 31.246144] usb 1-6:1.0: uevent [ 31.246192] usb 1-6:1.1: uevent [ 31.246239] usb 4-1: uevent [ 31.246312] usb 4-1:1.0: uevent [ 31.246359] usb 6-2: uevent [ 31.246431] usb 6-2:1.0: uevent [ 31.246479] usb 4-1.1: uevent [ 31.246551] usb 4-1.1:1.0: uevent [ 31.246598] usb 4-1.2: uevent [ 31.246670] usb 4-1.2:1.0: uevent [ 31.246718] usb 4-1.3: uevent [ 31.246791] usb 4-1.3:1.0: uevent [ 31.246839] usb 4-1.3:1.1: uevent [ 31.246886] usb 4-1.3:1.2: uevent [ 31.246937] usb 4-1.3:1.3: uevent [ 33.434383] hda-intel: Too big adjustment 32 [ 33.481519] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 33.688011] eth0: no IPv6 routers present [ 34.263523] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 39.628722] usb usb3: uevent [ 39.628799] usb 3-0:1.0: uevent [ 39.628832] usb usb4: uevent [ 39.628890] usb 4-0:1.0: uevent [ 39.628922] usb 4-1: uevent [ 39.628981] usb 4-1.1: uevent [ 39.629402] usb 4-1.1:1.0: uevent [ 39.629435] usb 4-1.2: uevent [ 39.629492] usb 4-1.2:1.0: uevent [ 39.629524] usb 4-1.3: uevent [ 39.629583] usb 4-1.3:1.0: uevent [ 39.629673] usb 4-1.3:1.1: uevent [ 39.629703] usb 4-1.3:1.2: uevent [ 39.629732] usb 4-1.3:1.3: uevent [ 39.629761] usb 4-1:1.0: uevent [ 39.629792] usb usb5: uevent [ 39.629851] usb 5-0:1.0: uevent [ 39.629882] usb usb1: uevent [ 39.629938] usb 1-0:1.0: uevent [ 39.629969] usb 1-6: uevent [ 39.630028] usb 1-6:1.0: uevent [ 39.630058] usb 1-6:1.1: uevent [ 39.630088] usb usb6: uevent [ 39.630144] usb 6-0:1.0: uevent [ 39.630175] usb 6-2: uevent [ 39.630233] usb 6-2:1.0: uevent [ 39.630263] usb usb7: uevent [ 39.630319] usb 7-0:1.0: uevent [ 39.630349] usb usb8: uevent [ 39.630408] usb 8-0:1.0: uevent [ 39.630438] usb usb2: uevent [ 39.630494] usb 2-0:1.0: uevent [ 68.192553] usb usb7: usb auto-resume [ 68.192558] usb usb7: wakeup_rh [ 68.228050] hub 7-0:1.0: hub_resume [ 68.228103] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 68.228148] usb usb8: usb auto-resume [ 68.228150] usb usb8: wakeup_rh [ 68.268045] hub 8-0:1.0: hub_resume [ 68.268089] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 68.268128] usb usb2: usb auto-resume [ 68.268132] ehci_hcd 0000:00:1d.7: resume root hub [ 68.320076] hub 2-0:1.0: hub_resume [ 68.320130] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 68.320208] usb usb5: usb auto-resume [ 68.320211] usb usb5: wakeup_rh [ 68.361073] hub 5-0:1.0: hub_resume [ 68.361125] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 68.361299] usb usb3: usb auto-resume [ 68.361302] usb usb3: wakeup_rh [ 68.400059] hub 3-0:1.0: hub_resume [ 68.400107] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 69.345073] usb usb7: suspend_rh (auto-stop) [ 69.345104] usb usb8: suspend_rh (auto-stop) [ 69.593072] usb usb5: suspend_rh (auto-stop) [ 69.593103] usb usb3: suspend_rh (auto-stop) [ 70.816109] hub 7-0:1.0: hub_suspend [ 70.816118] usb usb7: bus auto-suspend [ 70.816121] usb usb7: suspend_rh [ 70.816139] hub 8-0:1.0: hub_suspend [ 70.816143] usb usb8: bus auto-suspend [ 70.816145] usb usb8: suspend_rh [ 70.816163] hub 2-0:1.0: hub_suspend [ 70.816173] usb usb2: bus auto-suspend [ 70.816175] ehci_hcd 0000:00:1d.7: suspend root hub [ 70.816196] hub 5-0:1.0: hub_suspend [ 70.816199] usb usb5: bus auto-suspend [ 70.816200] usb usb5: suspend_rh [ 70.816215] hub 3-0:1.0: hub_suspend [ 70.816217] usb usb3: bus auto-suspend [ 70.816219] usb usb3: suspend_rh [ 156.899523] tg3 0000:02:00.0: PME# enabled [ 156.899546] tg3 0000:02:00.0: wake-up capability enabled by ACPI [ 157.318376] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 106 us [ 157.341786] uhci_hcd 0000:00:1a.1: release dev 4 ep81-INT, period 8, phase 4, 14 us [ 157.353182] [drm] Resetting GPU [ 158.477031] PM: Syncing filesystems ... done. [ 158.478465] PM: Preparing system for mem sleep [ 158.478468] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 158.478982] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 158.479017] PM: Entering mem sleep [ 158.479027] Suspending console(s) (use no_console_suspend to debug) [ 158.481786] usb 4-1.3: usb suspend [ 158.502789] usb 4-1.2: usb suspend [ 158.518785] uhci_hcd 0000:00:1a.1: release dev 3 ep81-INT, period 8, phase 4, 17 us [ 158.521793] usb 4-1.1: usb suspend [ 158.538386] usb 6-2: usb suspend [ 158.552116] hub 4-1:1.0: hub_suspend [ 158.553783] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 128, phase 0, 12 us [ 158.555795] usb 4-1: usb suspend [ 158.568114] usb 1-6: usb suspend [ 158.584121] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 158.737188] sd 0:0:0:0: [sda] Stopping disk [ 159.730398] hub 6-0:1.0: hub_suspend [ 159.730401] usb usb6: bus suspend [ 159.730403] usb usb6: suspend_rh [ 159.730420] hub 4-0:1.0: hub_suspend [ 159.730423] usb usb4: bus suspend [ 159.730424] usb usb4: suspend_rh [ 159.730441] hub 1-0:1.0: hub_suspend [ 159.730443] usb usb1: bus suspend [ 159.730445] ehci_hcd 0000:00:1a.7: suspend root hub [ 159.730510] ACPI handle has no context! [ 159.730931] b43-pci-bridge 0000:06:00.0: PCI INT A disabled [ 159.744265] HDA Intel 0000:01:00.1: PCI INT B disabled [ 159.744318] ACPI handle has no context! [ 159.760646] pci 0000:01:00.0: PCI INT A disabled [ 159.840110] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 159.840113] uhci_hcd 0000:00:1d.2: uhci_pci_suspend [ 159.840121] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 159.840123] uhci_hcd 0000:00:1d.1: uhci_pci_suspend [ 159.840131] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 159.840134] uhci_hcd 0000:00:1d.0: uhci_pci_suspend [ 159.840141] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 159.856593] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 159.872120] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 159.872123] uhci_hcd 0000:00:1a.2: uhci_pci_suspend [ 159.872130] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 159.872133] uhci_hcd 0000:00:1a.1: uhci_pci_suspend [ 159.872140] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 159.872143] uhci_hcd 0000:00:1a.0: uhci_pci_suspend [ 159.872150] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 159.872300] PM: suspend devices took 1.396 seconds [ 159.872507] ehci_hcd 0000:00:1d.7: wakeup: 0 [ 159.872513] ehci_hcd 0000:00:1d.7: PME# disabled [ 159.888015] ehci_hcd 0000:00:1d.7: --> PCI D3hot [ 159.888049] uhci_hcd 0000:00:1d.2: wakeup: 0 [ 159.888051] uhci_hcd 0000:00:1d.2: --> PCI D0 [ 159.888085] uhci_hcd 0000:00:1d.1: wakeup: 0 [ 159.888087] uhci_hcd 0000:00:1d.1: --> PCI D0 [ 159.888121] uhci_hcd 0000:00:1d.0: wakeup: 0 [ 159.888122] uhci_hcd 0000:00:1d.0: --> PCI D0 [ 159.888306] ehci_hcd 0000:00:1a.7: wakeup: 0 [ 159.888312] ehci_hcd 0000:00:1a.7: PME# disabled [ 159.904015] ehci_hcd 0000:00:1a.7: --> PCI D3hot [ 159.904049] uhci_hcd 0000:00:1a.2: wakeup: 0 [ 159.904051] uhci_hcd 0000:00:1a.2: --> PCI D0 [ 159.904085] uhci_hcd 0000:00:1a.1: wakeup: 0 [ 159.904086] uhci_hcd 0000:00:1a.1: --> PCI D0 [ 159.904120] uhci_hcd 0000:00:1a.0: wakeup: 0 [ 159.904122] uhci_hcd 0000:00:1a.0: --> PCI D0 [ 159.904499] ACPI: Preparing to enter system sleep state S3 [ 159.910655] Disabling non-boot CPUs ... [ 159.912802] CPU 1 is now offline [ 159.912804] SMP alternatives: switching to UP code [ 159.917524] CPU0 attaching NULL sched-domain. [ 159.917527] CPU1 attaching NULL sched-domain. [ 159.917531] CPU0 attaching NULL sched-domain. [ 159.917645] CPU1 is down [ 159.917681] Extended CMOS year: 2000 [ 159.917681] Back to C! [ 159.917681] Extended CMOS year: 2000 [ 159.917681] Enabling non-boot CPUs ... [ 159.917681] SMP alternatives: switching to SMP code [ 159.922319] Booting processor 1 APIC 0x1 ip 0x6000 [ 159.917436] Initializing CPU#1 [ 159.917436] Calibrating delay using timer specific routine.. 5054.07 BogoMIPS (lpj=10108151) [ 159.917436] CPU: L1 I cache: 32K, L1 D cache: 32K [ 159.917436] CPU: L2 cache: 3072K [ 159.917436] CPU: Physical Processor ID: 0 [ 159.917436] CPU: Processor Core ID: 1 [ 160.012622] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 160.012681] CPU0 attaching NULL sched-domain. [ 160.013014] Switched to high resolution mode on CPU 1 [ 160.028015] CPU0 attaching sched-domain: [ 160.028017] domain 0: span 0-1 level MC [ 160.028019] groups: 0 1 [ 160.028022] CPU1 attaching sched-domain: [ 160.028024] domain 0: span 0-1 level MC [ 160.028025] groups: 1 0 [ 160.029014] CPU1 is up [ 160.029016] ACPI: Waking up from system sleep state S3 [ 160.272151] pcieport-driver 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 160.272155] pcieport-driver 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 160.272194] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 160.272231] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 160.272249] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30a) [ 160.272262] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x1841) [ 160.272275] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 160.272319] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 160.272338] ehci_hcd 0000:00:1a.7: PME# disabled [ 160.272356] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 160.272375] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 160.272381] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102) [ 160.272410] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 160.272422] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf1f1f001) [ 160.272426] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600) [ 160.272431] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 160.272436] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x30200) [ 160.272443] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 160.272449] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 160.272494] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) [ 160.272505] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) [ 160.272511] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) [ 160.272520] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 160.272526] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 160.272571] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x4030a) [ 160.272582] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) [ 160.272588] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) [ 160.272597] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 160.272603] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 160.272660] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 160.272697] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 160.272734] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 160.272778] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 160.272797] ehci_hcd 0000:00:1d.7: PME# disabled [ 160.272806] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 160.272817] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 160.272822] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 160.272826] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 160.272838] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 160.272908] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 160.272930] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 160.272979] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0x80000004) [ 160.273011] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [ 160.273027] pci 0000:01:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xfc000000) [ 160.273032] pci 0000:01:00.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001) [ 160.273036] pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x8, writing 0xd0000008) [ 160.273041] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 160.273047] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100103) [ 160.273086] HDA Intel 0000:01:00.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20b) [ 160.273106] HDA Intel 0000:01:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc010000) [ 160.273110] HDA Intel 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 160.273117] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100103) [ 160.273212] tg3 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 160.273221] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [ 160.273514] b43-pci-bridge 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 160.273573] b43-pci-bridge 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) [ 160.273585] b43-pci-bridge 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 160.273601] b43-pci-bridge 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [ 160.465046] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 160.465058] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 160.465064] uhci_hcd 0000:00:1a.0: uhci_pci_resume [ 160.465069] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2400 [ 160.465070] uhci_hcd 0000:00:1a.0: Performing full reset [ 160.465103] usb usb3: root hub lost power or was reset [ 160.465105] usb usb3: suspend_rh [ 160.465130] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 160.465143] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 160.465148] uhci_hcd 0000:00:1a.1: uhci_pci_resume [ 160.465153] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 160.465155] uhci_hcd 0000:00:1a.1: Performing full reset [ 160.465188] usb usb4: root hub lost power or was reset [ 160.465189] usb usb4: suspend_rh [ 160.465228] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 160.465241] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 160.465246] uhci_hcd 0000:00:1a.2: uhci_pci_resume [ 160.465251] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 160.465252] uhci_hcd 0000:00:1a.2: Performing full reset [ 160.465285] usb usb5: root hub lost power or was reset [ 160.465286] usb usb5: suspend_rh [ 160.465313] ehci_hcd 0000:00:1a.7: PME# disabled [ 160.465318] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 160.465331] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 160.465462] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 160.465475] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 160.465512] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 160.465523] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 160.465528] uhci_hcd 0000:00:1d.0: uhci_pci_resume [ 160.465533] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2400 [ 160.465535] uhci_hcd 0000:00:1d.0: Performing full reset [ 160.465567] usb usb6: root hub lost power or was reset [ 160.465569] usb usb6: suspend_rh [ 160.465607] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 160.465618] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 160.465623] uhci_hcd 0000:00:1d.1: uhci_pci_resume [ 160.465628] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 160.465629] uhci_hcd 0000:00:1d.1: Performing full reset [ 160.465662] usb usb7: root hub lost power or was reset [ 160.465664] usb usb7: suspend_rh [ 160.465686] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 160.465698] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 160.465702] uhci_hcd 0000:00:1d.2: uhci_pci_resume [ 160.465707] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 160.465709] uhci_hcd 0000:00:1d.2: Performing full reset [ 160.465741] usb usb8: root hub lost power or was reset [ 160.465743] usb usb8: suspend_rh [ 160.465768] ehci_hcd 0000:00:1d.7: PME# disabled [ 160.465774] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 160.465785] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 160.465804] pci 0000:00:1e.0: setting latency timer to 64 [ 160.465983] ahci 0000:00:1f.2: setting latency timer to 64 [ 160.466214] pci 0000:01:00.0: PME# disabled [ 160.466221] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 160.466234] pci 0000:01:00.0: setting latency timer to 64 [ 160.466398] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 160.466411] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 160.466886] b43-pci-bridge 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 160.484385] usb usb1: usb resume [ 160.484387] ehci_hcd 0000:00:1a.7: resume root hub [ 160.536643] hub 1-0:1.0: hub_resume [ 160.536662] hub 1-0:1.0: port 6: status 0507 change 0000 [ 160.536667] usb usb2: usb resume [ 160.536670] ehci_hcd 0000:00:1d.7: resume root hub [ 160.588095] hub 2-0:1.0: hub_resume [ 160.588119] usb usb4: usb resume [ 160.588121] usb usb4: wakeup_rh [ 160.628097] hub 4-0:1.0: hub_reset_resume [ 160.628099] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 160.732103] uhci_hcd 0000:00:1a.1: port 1 portsc 009b,00 [ 160.732107] hub 4-0:1.0: port 1: status 0101 change 0003 [ 160.784109] ata6: SATA link down (SStatus 0 SControl 300) [ 160.784147] ata5: SATA link down (SStatus 0 SControl 300) [ 160.836106] usb usb6: usb resume [ 160.836109] usb usb6: wakeup_rh [ 160.876096] hub 6-0:1.0: hub_reset_resume [ 160.876099] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 160.948105] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 160.975736] ata2.00: configured for UDMA/100 [ 160.977172] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 160.977174] ata2: irq_stat 0x40000001 [ 160.980048] uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00 [ 160.980052] hub 6-0:1.0: port 2: status 0301 change 0003 [ 161.003735] ata2.00: configured for UDMA/100 [ 161.003739] ata2: EH complete [ 161.093079] sd 0:0:0:0: [sda] Starting disk [ 163.244104] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 163.260642] ata1.00: configured for UDMA/133 [ 163.260653] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 163.260656] ata1: irq_stat 0x00400040, connection status changed [ 163.265766] ata1.00: configured for UDMA/133 [ 163.265769] ata1: EH complete [ 163.270419] usb 1-6: usb resume [ 163.300175] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT [ 163.316100] usb 1-6: finish resume [ 163.321515] usb 1-6: disable remote wakeup, status -32 [ 163.328101] usb 4-1: finish reset-resume [ 163.440104] usb 4-1: reset full speed USB device using uhci_hcd and address 2 [ 163.572101] usb 4-1: ep0 maxpacket = 8 [ 163.587674] hub 4-1:1.0: hub_reset_resume [ 163.587676] hub 4-1:1.0: enabling power on all ports [ 163.693674] hub 4-1:1.0: port 1: status 0101 change 0001 [ 163.695674] hub 4-1:1.0: port 2: status 0101 change 0001 [ 163.697674] hub 4-1:1.0: port 3: status 0100 change 0000 [ 163.800101] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 163.800114] usb 6-2: finish reset-resume [ 164.060104] usb 6-2: reset low speed USB device using uhci_hcd and address 2 [ 164.368673] usb 4-1.1: finish reset-resume [ 164.441674] usb 4-1.1: reset full speed USB device using uhci_hcd and address 3 [ 164.536503] usb 4-1.1: ep0 maxpacket = 8 [ 164.554676] uhci_hcd 0000:00:1a.1: reserve dev 3 ep81-INT, period 8, phase 4, 17 us [ 164.555672] usb 4-1.2: finish reset-resume [ 164.629672] usb 4-1.2: reset full speed USB device using uhci_hcd and address 4 [ 164.724099] usb 4-1.2: ep0 maxpacket = 8 [ 164.771678] hub 4-1:1.0: port 3 status 0000.0100 after resume, -19 [ 164.771680] usb 4-1.3: can't resume, status -19 [ 164.771681] hub 4-1:1.0: logical disconnect on port 3 [ 164.772812] PM: resume devices took 4.500 seconds [ 164.773361] PM: Finishing wakeup. [ 164.773362] Restarting tasks ... [ 164.773551] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 164.773554] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 164.773557] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 164.773568] hub 4-0:1.0: port 1, status 0103, change 0000, 12 Mb/s [ 164.773571] hub 6-0:1.0: state 7 ports 2 chg 0004 evt 0004 [ 164.773581] hub 6-0:1.0: port 2, status 0303, change 0000, 1.5 Mb/s [ 164.773583] hub 4-1:1.0: state 7 ports 3 chg 000e evt 0004 [ 164.785321] hub 4-1:1.0: port 1, status 0103, change 0000, 12 Mb/s [ 164.786649] hub 4-1:1.0: port 2, status 0103, change 0000, 12 Mb/s [ 164.787647] hub 4-1:1.0: port 3, status 0100, change 0000, 12 Mb/s [ 164.787650] usb 4-1.3: USB disconnect, address 5 [ 164.787652] usb 4-1.3: unregistering device [ 164.787654] usb 4-1.3: usb_disable_device nuking all URBs [ 164.787659] usb 4-1.3: unregistering interface 4-1.3:1.0 [ 164.787798] usb 4-1.3:1.0: uevent [ 164.787809] usb 4-1.3: unregistering interface 4-1.3:1.1 [ 164.787845] usb 4-1.3:1.1: uevent [ 164.787854] usb 4-1.3: unregistering interface 4-1.3:1.2 [ 164.787892] usb 4-1.3:1.2: uevent [ 164.787901] usb 4-1.3: unregistering interface 4-1.3:1.3 [ 164.787924] usb 4-1.3:1.3: uevent [ 164.788021] usb 4-1.3: uevent [ 164.846142] done. [ 165.398178] [drm] Loading RV710 PFP Microcode [ 165.398220] [drm] Loading RV710 CP Microcode [ 165.413187] [drm] Resetting GPU [ 165.676467] tg3 0000:02:00.0: wake-up capability disabled by ACPI [ 165.676477] tg3 0000:02:00.0: PME# disabled [ 165.676620] tg3 0000:02:00.0: irq 29 for MSI/MSI-X [ 165.830723] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 165.985035] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 106 us [ 166.001067] uhci_hcd 0000:00:1a.1: reserve dev 4 ep81-INT, period 8, phase 4, 14 us [ 166.816034] hub 2-0:1.0: hub_suspend [ 166.816044] usb usb2: bus auto-suspend [ 166.816047] ehci_hcd 0000:00:1d.7: suspend root hub [ 167.715261] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 167.715265] tg3: eth0: Flow control is off for TX and off for RX. [ 167.715502] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Attachment:
signature.asc
Description: OpenPGP digital signature
