fix the warning: WARNING:BLOCK_COMMENT_STYLE: Block comments should align the * on each line Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- drivers/usb/gadget/udc/bdc/bdc.h | 2 +- drivers/usb/gadget/udc/bdc/bdc_ep.c | 2 +- drivers/usb/gadget/udc/bdc/bdc_udc.c | 6 +++--- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h index 9615438..6940934 100644 --- a/drivers/usb/gadget/udc/bdc/bdc.h +++ b/drivers/usb/gadget/udc/bdc/bdc.h @@ -35,7 +35,7 @@ /* * Maximum size of ep0 response buffer for ch9 requests, * the set_sel request uses 6 so far, the max. -*/ + */ #define EP0_RESPONSE_BUFF 6 /* Start with SS as default */ #define EP0_MAX_PKT_SIZE 512 diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c index 0c44002..eea66d5 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_ep.c +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c @@ -68,7 +68,7 @@ static void ep_bd_list_free(struct bdc_ep *ep, u32 num_tabs) * check if the bd_table struct is allocated ? * if yes, then check if bd memory has been allocated, then * free the dma_pool and also the bd_table struct memory - */ + */ bd_table = bd_list->bd_table_array[index]; dev_dbg(bdc->dev, "bd_table:%p index:%d\n", bd_table, index); if (!bd_table) { diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c index 15652c5..ba9365e 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_udc.c +++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c @@ -164,7 +164,7 @@ static void bdc_func_wake_timer(struct work_struct *work) /* * Check if host has started transferring on endpoints * FUNC_WAKE_ISSUED is cleared when transfer has started after resume - */ + */ if (bdc->devstatus & FUNC_WAKE_ISSUED) { dev_dbg(bdc->dev, "FUNC_WAKE_ISSUED FLAG IS STILL SET\n"); /* flag is still set, so again send func wake */ @@ -205,7 +205,7 @@ static void handle_link_state_change(struct bdc *bdc, u32 uspc) * if not then send function wake again every * TNotification secs until host initiates * transfer to BDC, USB3 spec Table 8.13 - */ + */ schedule_delayed_work( &bdc->func_wake_notify, msecs_to_jiffies(BDC_TNOTIFY)); @@ -379,7 +379,7 @@ static int bdc_udc_start(struct usb_gadget *gadget, * Run the controller from here and when BDC is connected to * Host then driver will receive a USPC SR with VBUS present * and then driver will do a softconnect. - */ + */ ret = bdc_run(bdc); if (ret) { dev_err(bdc->dev, "%s bdc run fail\n", __func__); -- 1.9.1