On Friday 03 July 2009, Ajay Kumar Gupta wrote: > OMAP3EVM uses ISP1504 phy which doesn't require any > programming and thus has to use NOP otg transceiver. > > Cleanups being done: > - Remove unwanted code in usb-musb.c file > - Register nop in OMAP3EVM board file using > usb_nop_xceiv_register(). > - Select NOP_USB_XCEIV for OMAP3EVM boards. > > Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx> Acked-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx> ... another for-2.6.31 bugfix. > --- > This patch is refreshed based on David's recommendations at > [1] and [2]. > > [1] http://marc.info/?l=linux-omap&m=123904265231360&w=2 > [2] http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg13891.html > > arch/arm/mach-omap2/board-omap3evm.c | 3 +++ > arch/arm/mach-omap2/usb-musb.c | 21 --------------------- > drivers/usb/musb/Kconfig | 1 + > 3 files changed, 4 insertions(+), 21 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c > index 595beac..ad3c78c 100644 > --- a/arch/arm/mach-omap2/board-omap3evm.c > +++ b/arch/arm/mach-omap2/board-omap3evm.c > @@ -25,6 +25,7 @@ > #include <linux/spi/spi.h> > #include <linux/spi/ads7846.h> > #include <linux/i2c/twl4030.h> > +#include <linux/usb/otg.h> > > #include <mach/hardware.h> > #include <asm/mach-types.h> > @@ -307,6 +308,8 @@ static void __init omap3_evm_init(void) > ARRAY_SIZE(omap3evm_spi_board_info)); > > omap_serial_init(); > + /* OMAP3EVM uses ISP1504 phy and thus has to register nop transceiver */ > + usb_nop_xceiv_register(); > usb_musb_init(); > usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); > ads7846_dev_init(); > diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c > index d85296d..739e59e 100644 > --- a/arch/arm/mach-omap2/usb-musb.c > +++ b/arch/arm/mach-omap2/usb-musb.c > @@ -155,20 +155,6 @@ static struct platform_device musb_device = { > .resource = musb_resources, > }; > > -#ifdef CONFIG_NOP_USB_XCEIV > -static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32); > - > -static struct platform_device nop_xceiv_device = { > - .name = "nop_usb_xceiv", > - .id = -1, > - .dev = { > - .dma_mask = &nop_xceiv_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - .platform_data = NULL, > - }, > -}; > -#endif > - > void __init usb_musb_init(void) > { > if (cpu_is_omap243x()) > @@ -183,13 +169,6 @@ void __init usb_musb_init(void) > */ > musb_plat.clock = "ick"; > > -#ifdef CONFIG_NOP_USB_XCEIV > - if (platform_device_register(&nop_xceiv_device) < 0) { > - printk(KERN_ERR "Unable to register NOP-XCEIV device\n"); > - return; > - } > -#endif > - > if (platform_device_register(&musb_device) < 0) { > printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); > return; > diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig > index 70073b1..f822fd5 100644 > --- a/drivers/usb/musb/Kconfig > +++ b/drivers/usb/musb/Kconfig > @@ -11,6 +11,7 @@ config USB_MUSB_HDRC > depends on (USB || USB_GADGET) && HAVE_CLK > depends on !SUPERH > select NOP_USB_XCEIV if ARCH_DAVINCI > + select NOP_USB_XCEIV if MACH_OMAP3EVM > select TWL4030_USB if MACH_OMAP_3430SDP > select USB_OTG_UTILS > tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' > -- > 1.6.2.4 > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
