Re: [PATCH] usb: host: ohci-platform: Disable ohci for rk3288

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-07-02 10:05, Jagan Teki wrote:
rk3288 has usb host0 ohci controller but doesn't actually work
on real hardware but it works with new revision chip rk3288w.

So, disable ohci for rk3288.

For rk3288w chips the compatible update code is handled by bootloader.

Cc: William Wu <william.wu@xxxxxxxxxxxxxx>
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Note:
- U-Boot patch for compatible update
https://patchwork.ozlabs.org/project/uboot/patch/20200702084820.35942-1-jagan@xxxxxxxxxxxxxxxxxxxx/

  drivers/usb/host/ohci-platform.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 7addfc2cbadc..24655ed6a7e0 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -96,7 +96,7 @@ static int ohci_platform_probe(struct platform_device *dev)
  	struct ohci_hcd *ohci;
  	int err, irq, clk = 0;
- if (usb_disabled())
+	if (usb_disabled() || of_machine_is_compatible("rockchip,rk3288"))

This seems unnecessary to me - if we've even started probing a driver for a broken piece of hardware to the point that we need magic checks to bail out again, then something is already fundamentally wrong.

Old boards only sold with the original SoC variant have no reason to enable the OHCI (since it never worked originally), thus will never execute this check.

New boards designed around the W variant to make use of the OHCI can freely enable it either way.

The only relative-edge-case where it might matter is older board designs still in production which have shipped with both SoC variants. Enabling OHCI can't be *necessary* given that it's still broken on a lot of deployed boards, so at best it must be an opportunistic nice-to-have. Since we're already having to rely on the bootloader to patch up the devicetree for other low-level differences in this case, it should be part of that responsibility for it to only enable the OHCI on the appropriate SoC variant too. Statically enabling it in the DTS for a board where it may well not work is just bad.

As soon as a DTB with a broken piece of hardware enabled gets passed to an OS, then the damage is already done. A driver patch in a future version of Linux that magically knows better and ignores it isn't going to help a user booting an older kernel image, or some other OS entirely.

Robin.

  		return -ENODEV;
/*




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux