There is no need to describe them sparately. Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> --- include/linux/usb/typec_altmode.h | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/include/linux/usb/typec_altmode.h b/include/linux/usb/typec_altmode.h index d834e236c6df6..a4b65eaa0f623 100644 --- a/include/linux/usb/typec_altmode.h +++ b/include/linux/usb/typec_altmode.h @@ -95,13 +95,7 @@ enum { * * Port drivers can use TYPEC_MODE_AUDIO and TYPEC_MODE_DEBUG as the mode * value for typec_set_mode() when accessory modes are supported. - */ -enum { - TYPEC_MODE_AUDIO = TYPEC_STATE_MODAL, /* Audio Accessory */ - TYPEC_MODE_DEBUG, /* Debug Accessory */ -}; - -/* + * * USB4 also requires that the pins on the connector are repurposed, just like * Alternate Modes. USB4 mode is however not entered with the Enter Mode Command * like the Alternate Modes are, but instead with a special Enter_USB Message. @@ -112,9 +106,11 @@ enum { * state values, just like the Accessory Modes. */ enum { - TYPEC_MODE_USB2 = TYPEC_MODE_DEBUG, /* USB 2.0 mode */ + TYPEC_MODE_USB2 = TYPEC_STATE_MODAL, /* USB 2.0 mode */ TYPEC_MODE_USB3, /* USB 3.2 mode */ - TYPEC_MODE_USB4 /* USB4 mode */ + TYPEC_MODE_USB4, /* USB4 mode */ + TYPEC_MODE_AUDIO, /* Audio Accessory */ + TYPEC_MODE_DEBUG, /* Debug Accessory */ }; #define TYPEC_MODAL_STATE(_state_) ((_state_) + TYPEC_STATE_MODAL) -- 2.27.0