On 20-06-29 10:04:13, Philippe Schenker wrote:
> On Mon, 2020-06-29 at 07:26 +0000, Peter Chen wrote:
> > On 20-06-26 13:03:11, Philippe Schenker wrote:
> > > If the hardware is in low-power-mode and one plugs in device or host
> > > it did not switch the mode due to the early exit out of the
> > > interrupt.
> >
> > Do you mean there is no coming call for role-switch? Could you please
> > share
> > your dts changes? Try below patch:
>
> Here are my DTS changes:
>
> diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> index 97601375f2640..c424f707a1afa 100644
> --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> @@ -13,6 +13,13 @@
> stdout-path = "serial0:115200n8";
> };
>
> + extcon_usbc_det: usbc_det {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbc_det>;
> + };
> +
> /* fixed crystal dedicated to mpc258x */
> clk16m: clk16m {
> compatible = "fixed-clock";
> @@ -174,6 +181,7 @@
> };
>
> &usbotg1 {
> + extcon = <&extcon_usbc_det>, <&extcon_usbc_det>;
If you have only ID extcon, but no VBUS extcon, you only need to
add only phandle, see dt-binding for detail please.
> status = "okay";
> };
>
> diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi
> b/arch/arm/boot/dts/imx7-colibri.dtsi
> index e18e89dec8792..caea90d2421fd 100644
> --- a/arch/arm/boot/dts/imx7-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx7-colibri.dtsi
> @@ -457,7 +457,7 @@
> };
>
> &usbotg1 {
> - dr_mode = "host";
> + dr_mode = "otg";
> };
>
> &usdhc1 {
> @@ -486,7 +486,7 @@
> &iomuxc {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
> &pinctrl_gpio4
> - &pinctrl_gpio7 &pinctrl_usbc_det>;
> + &pinctrl_gpio7>;
>
> pinctrl_gpio1: gpio1-grp {
> fsl,pins = <
>
> >
> >
> > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> > index e8ce300ad490..9e10dcfeb98f 100644
> > --- a/drivers/usb/chipidea/core.c
> > +++ b/drivers/usb/chipidea/core.c
> > @@ -1313,6 +1313,29 @@ static void ci_controller_suspend(struct
> > ci_hdrc *ci)
> > enable_irq(ci->irq);
> > }
> >
> > +/*
> > + * Handle the wakeup interrupt triggered by extcon connector
> > + * We need to call ci_irq again for extcon since the first
> > + * interrupt (wakeup int) only let the controller be out of
> > + * low power mode, but not handle any interrupts.
> > + */
> > +static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
> > +{
> > + struct ci_hdrc_cable *cable_id, *cable_vbus;
> > + u32 otgsc = hw_read_otgsc(ci, ~0);
> > +
> > + cable_id = &ci->platdata->id_extcon;
> > + cable_vbus = &ci->platdata->vbus_extcon;
> > +
> > + if (!IS_ERR(cable_id->edev) && ci->is_otg &&
> > + (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
> > + ci_irq(ci->irq, ci);
> > +
> > + if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
> > + (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
> > + ci_irq(ci->irq, ci);
> > +}
> > +
> > static int ci_controller_resume(struct device *dev)
> > {
> > struct ci_hdrc *ci = dev_get_drvdata(dev);
> > @@ -1343,6 +1366,7 @@ static int ci_controller_resume(struct device
> > *dev)
> > enable_irq(ci->irq);
> > if (ci_otg_is_fsm_mode(ci))
> > ci_otg_fsm_wakeup_by_srp(ci);
> > + ci_extcon_wakeup_int(ci);
> > }
> >
> > return 0;
>
> Thanks for creating this patch! I wanted also something like that, but
> couldn't find out where to put it.
>
> I tried this patch and with the above devicetree changes this works
> perfectly! Thanks Peter!
>
> Should I send the patch with you as the "Suggested-by" or do you want to
> send the patch so you are the Author? I would have it ready in my git
> repo.
This patch was a part of one patch at downstream, I will submit one and
add your tags.
> > >
> > > Hi Peter
> > >
> > > During my investigation I found a bug in ci_irq. I would appreciate
> > > if you could review this. From what I see this patch should be save
> > > to apply.
> > >
> > > This patch does not solve all of our issues. When I have RUNTIME_PM
> > > enabled on imx6ull or imx7. RNDIS still does not come up. So there
> > > has to be another bug hiding somewhere in the Runtime PM code to
> > > prevent
> > > RNDIS from working properly. I quickly looked through your patches
> > > that added this stuff back in 2015 but couldn't spot anything
> > > related to
> > > usb gadget-mode.
> > >
> > > If you right away know where the problem could be hiding itself,
> > > I would appreciate a hint.
> > >
> >
> > I need information for call trace for further suggestion.
With this patch, does your RNDIS issue be fixed or still not?
Peter
> >
> > Peter
> >
> > > ---
> > >
> > > drivers/usb/chipidea/core.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/chipidea/core.c
> > > b/drivers/usb/chipidea/core.c
> > > index 9a7c53d09ab4..5159420a23a4 100644
> > > --- a/drivers/usb/chipidea/core.c
> > > +++ b/drivers/usb/chipidea/core.c
> > > @@ -518,7 +518,7 @@ static irqreturn_t ci_irq(int irq, void *data)
> > > disable_irq_nosync(irq);
> > > ci->wakeup_int = true;
> > > pm_runtime_get(ci->dev);
> > > - return IRQ_HANDLED;
> > > + ret = IRQ_HANDLED;
> > > }
> > >
> > > if (ci->is_otg) {
> > > --
> > > 2.27.0
> > >
--
Thanks,
Peter Chen
