[Bug 208307] New: Alcor Micro Corp. Multi Flash Reader [058f:6366] keeps being detected and removed continuously

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugzilla.kernel.org/show_bug.cgi?id=208307

            Bug ID: 208307
           Summary: Alcor Micro Corp. Multi Flash Reader [058f:6366] keeps
                    being detected and removed continuously
           Product: Drivers
           Version: 2.5
    Kernel Version: 5.8-rc2
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: USB
          Assignee: drivers_usb@xxxxxxxxxxxxxxxxxxxxxx
          Reporter: jian-hong@xxxxxxxxxxxx
        Regression: No

Created attachment 289855
  --> https://bugzilla.kernel.org/attachment.cgi?id=289855&action=edit
The full dmesg

We have a laptop equipped with AMD Ryzen 5 4500U with Radeon Graphics.  The
Alcor Micro Corp. Multi Flash Reader keeps being detected and removed
continuously.  Then, once the storage modules try to access it, there will be
the failure.  These messages keep showing up like floods in the kernel message
log.

[    8.371606] usb 3-1: new high-speed USB device number 9 using xhci_hcd
[    8.501528] usb 3-1: New USB device found, idVendor=058f, idProduct=6366,
bcdDevice= 1.00
[    8.501529] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[    8.501530] usb 3-1: Product: Flash Card Reader/Writer
[    8.501531] usb 3-1: Manufacturer: Generic
[    8.501531] usb 3-1: SerialNumber: 058F63666485
[    8.501914] usb-storage 3-1:1.0: USB Mass Storage device detected
[    8.502053] scsi host3: usb-storage 3-1:1.0
[    9.547020] scsi 3:0:0:0: Direct-Access     Multiple Card  Reader     1.00
PQ: 0 ANSI: 4
[    9.547104] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    9.966614] usb 3-1: reset high-speed USB device number 9 using xhci_hcd
[   10.204353] usb 3-1: USB disconnect, device number 9
[   10.211655] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result:
hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[   10.211657] sd 3:0:0:0: [sdb] Sense not available.
[   10.211661] sd 3:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[   10.211662] sd 3:0:0:0: [sdb] 0-byte physical blocks
[   10.211670] sd 3:0:0:0: [sdb] Write Protect is off
[   10.211671] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[   10.211678] sd 3:0:0:0: [sdb] Asking for cache data failed
[   10.211678] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[   10.218103] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result:
hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[   10.218106] sd 3:0:0:0: [sdb] Sense not available.
[   10.218132] sd 3:0:0:0: [sdb] Attached SCSI removable disk

-- 
You are receiving this mail because:
You are watching the assignee of the bug.



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux