On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's co-processor, VideoCore. This series reworks how we handle this. The previous solution makes use of PCI quirks and exporting platform specific functions. Albeit functional it feels pretty shoehorned. This proposes an alternative way of handling the triggering of the xHCI chip initialization trough means of a reset controller. The benefits are pretty evident: less platform churn in core xHCI code, and no explicit device dependency management in pcie-brcmstb. Note that patch #1 depends on another series[1]. The series is based on v5.8-rc2 v3: https://www.spinics.net/lists/arm-kernel/msg813612.html v2: https://lkml.org/lkml/2020/6/9/875 v1: https://lore.kernel.org/linux-usb/20200608192701.18355-1-nsaenzjulienne@xxxxxxx/T/#t [1] https://lwn.net/ml/linux-kernel/cover.662a8d401787ef33780d91252a352de91dc4be10.1590594293.git-series.maxime@xxxxxxxxxx/ --- Changes since v3: - Rework dt patch to include root bridge as a separate node - Update xhci-pci patch now that the xhci dev has a dt node (it was getting it in the past from its bus) Changes since v2: - Add reset to resume routine in xhci-pci - Correct of refcount in pci-quirks - Correct typos - Use include file to define firmware reset IDs Changes since v1: - Rework reset controller so it's less USB centric - Use correct reset controller API in xhci-pci - Correct typos Nicolas Saenz Julienne (9): dt-bindings: reset: Add a binding for the RPi Firmware reset controller reset: Add Raspberry Pi 4 firmware reset controller ARM: dts: bcm2711: Add firmware usb reset node ARM: dts: bcm2711: Add reset controller to xHCI node usb: xhci-pci: Add support for reset controllers Revert "USB: pci-quirks: Add Raspberry Pi 4 quirk" usb: host: pci-quirks: Bypass xHCI quirks for Raspberry Pi 4 Revert "firmware: raspberrypi: Introduce vl805 init routine" Revert "PCI: brcmstb: Wait for Raspberry Pi's firmware when present" .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++ arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 22 ++++ drivers/firmware/Kconfig | 3 +- drivers/firmware/raspberrypi.c | 61 --------- drivers/pci/controller/pcie-brcmstb.c | 17 --- drivers/reset/Kconfig | 11 ++ drivers/reset/Makefile | 1 + drivers/reset/reset-raspberrypi.c | 122 ++++++++++++++++++ drivers/usb/host/pci-quirks.c | 22 ++-- drivers/usb/host/xhci-pci.c | 10 ++ drivers/usb/host/xhci.h | 2 + .../reset/raspberrypi,firmware-reset.h | 13 ++ include/soc/bcm2835/raspberrypi-firmware.h | 7 - 13 files changed, 215 insertions(+), 97 deletions(-) create mode 100644 drivers/reset/reset-raspberrypi.c create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h -- 2.27.0
