USB3 tunneling is possible only over USB4 link so don't create USB3 tunnels if that's not the case. Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> --- drivers/thunderbolt/tb.c | 3 +++ drivers/thunderbolt/tb.h | 2 ++ drivers/thunderbolt/tb_regs.h | 1 + drivers/thunderbolt/usb4.c | 24 +++++++++++++++++++++--- 4 files changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 55daa7f1a87d..2da82259e77c 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -235,6 +235,9 @@ static int tb_tunnel_usb3(struct tb *tb, struct tb_switch *sw) if (!up) return 0; + if (!sw->link_usb4) + return 0; + /* * Look up available down port. Since we are chaining it should * be found right above this switch. diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index b53ef5be7263..de8124949eaf 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -97,6 +97,7 @@ struct tb_switch_tmu { * @device_name: Name of the device (or %NULL if not known) * @link_speed: Speed of the link in Gb/s * @link_width: Width of the link (1 or 2) + * @link_usb4: Upstream link is USB4 * @generation: Switch Thunderbolt generation * @cap_plug_events: Offset to the plug events capability (%0 if not found) * @cap_lc: Offset to the link controller capability (%0 if not found) @@ -136,6 +137,7 @@ struct tb_switch { const char *device_name; unsigned int link_speed; unsigned int link_width; + bool link_usb4; unsigned int generation; int cap_plug_events; int cap_lc; diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h index c29c5075525a..77d4b8598835 100644 --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -290,6 +290,7 @@ struct tb_regs_port_header { /* USB4 port registers */ #define PORT_CS_18 0x12 #define PORT_CS_18_BE BIT(8) +#define PORT_CS_18_TCM BIT(9) #define PORT_CS_19 0x13 #define PORT_CS_19_PC BIT(3) diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 50c7534ba31e..393771d50962 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -192,6 +192,20 @@ static int usb4_switch_op(struct tb_switch *sw, u16 opcode, u8 *status) return 0; } +static bool link_is_usb4(struct tb_port *port) +{ + u32 val; + + if (!port->cap_usb4) + return false; + + if (tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_18, 1)) + return false; + + return !(val & PORT_CS_18_TCM); +} + /** * usb4_switch_setup() - Additional setup for USB4 device * @sw: USB4 router to setup @@ -205,6 +219,7 @@ static int usb4_switch_op(struct tb_switch *sw, u16 opcode, u8 *status) */ int usb4_switch_setup(struct tb_switch *sw) { + struct tb_port *downstream_port; struct tb_switch *parent; bool tbt3, xhci; u32 val = 0; @@ -217,6 +232,11 @@ int usb4_switch_setup(struct tb_switch *sw) if (ret) return ret; + parent = tb_switch_parent(sw); + downstream_port = tb_port_at(tb_route(sw), parent); + sw->link_usb4 = link_is_usb4(downstream_port); + tb_sw_dbg(sw, "link: %s\n", sw->link_usb4 ? "USB4" : "TBT3"); + xhci = val & ROUTER_CS_6_HCI; tbt3 = !(val & ROUTER_CS_6_TNS); @@ -227,9 +247,7 @@ int usb4_switch_setup(struct tb_switch *sw) if (ret) return ret; - parent = tb_switch_parent(sw); - - if (tb_switch_find_port(parent, TB_TYPE_USB3_DOWN)) { + if (sw->link_usb4 && tb_switch_find_port(parent, TB_TYPE_USB3_DOWN)) { val |= ROUTER_CS_5_UTO; xhci = false; } -- 2.27.0.rc2