Re: [PATCH v2 4/6] regulator: Add support for QCOM PMIC VBUS booster

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/12/20 4:19 PM, Wesley Cheng wrote:
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 074a2ef55943..f9165f9f9051 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -797,6 +797,16 @@ config REGULATOR_QCOM_SPMI
>  	  Qualcomm SPMI PMICs as a module. The module will be named
>  	  "qcom_spmi-regulator".
>  
> +config REGULATOR_QCOM_USB_VBUS
> +	tristate "Qualcomm USB Vbus regulator driver"
> +	depends on SPMI || COMPILE_TEST
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  regulator used to enable the VBUS output.
> +
> +	  Say M here if you want to include support for enabling the VBUS output
> +	  as a module. The module will be named "qcom_usb-regulator".

Hi,
Shouldn't that module name match what is in the Makefile?


> +
>  config REGULATOR_RC5T583
>  	tristate "RICOH RC5T583 Power regulators"
>  	depends on MFD_RC5T583
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index c0d6b96ebd78..cbab28aa7b56 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
> +obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
>  obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
>  obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
>  obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o


thanks.
-- 
~Randy




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux