Re: [PATCH v2] usb/gadget/function: introduce Built-in CDROM support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2020-06-10 at 10:31 -0400, Alan Stern wrote:
> On Wed, Jun 10, 2020 at 02:15:18PM +0800, Macpaul Lin wrote:
> > Introduce Built-In CDROM (BICR) support.
> > This feature depends on USB_CONFIGFS_MASS_STORAGE option.
> > 
> > 1. Some settings and new function is introduced for BICR.
> > 2. Some work around for adapting Android settings is introduced as well.
> 
> You're going to have to give a much better explanation of what this 
> does.  For people who don't know what Built-In CDROM support is, what 
> you wrote is meaningless.
> 
> For example, how is BICR support different from the CDROM support 
> already present in the driver?  And what's so special about it that it 
> needs its own kconfig setting?
> 
> > @@ -369,6 +372,10 @@ static void set_bulk_out_req_length(struct fsg_common *common,
> >  	if (rem > 0)
> >  		length += common->bulk_out_maxpacket - rem;
> >  	bh->outreq->length = length;
> > +
> > +	/* some USB 2.0 hardware requires this setting */
> > +	if (common->bicr)
> > +		bh->outreq->short_not_ok = 1;
> 
> How is this connected with BICR?  If some USB 2.0 hardware requires this 
> setting, shouldn't it always be turned on?
> 
> Besides, why does some hardware require this?  What goes wrong if 
> short_not_ok is set to 0?  If it causes problems, why didn't we become 
> aware of them many years ago?

Thanks for Alan and Greg's suggestion, we will check these issues and
see if a better solution could be work out.

> > @@ -527,7 +534,16 @@ static int fsg_setup(struct usb_function *f,
> >  				w_length != 1)
> >  			return -EDOM;
> >  		VDBG(fsg, "get max LUN\n");
> > -		*(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
> > +		if (IS_ENABLED(USB_CONFIGFS_BICR) && fsg->common->bicr) {
> > +			/*
> > +			 * When Built-In CDROM is enabled,
> > +			 * we share only one LUN.
> > +			 */
> > +			*(u8 *)req->buf = 0;
> > +		} else {
> > +			*(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
> > +		}
> 
> This is a very strange way of enforcing a single-LUN restriction.  Why 
> do it here?  A much more logical place would be where cfg->nluns is set 
> up originally.
> 
> > +		INFO(fsg, "get max LUN = %d\n", *(u8 *)req->buf);
> 
> This debugging line isn't needed.
> 
> >  		/* Respond with data/status */
> >  		req->length = min((u16)1, w_length);
> > @@ -1329,7 +1345,7 @@ static int do_start_stop(struct fsg_common *common)
> >  	}
> >  
> >  	/* Are we allowed to unload the media? */
> > -	if (curlun->prevent_medium_removal) {
> > +	if (!curlun->nofua && curlun->prevent_medium_removal) {
> 
> How is nofua connected to BICR?  Or to prevent_medium_removal?
> 
> >  		LDBG(curlun, "unload attempt prevented\n");
> >  		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
> >  		return -EINVAL;
> > @@ -2692,6 +2708,7 @@ int fsg_common_set_cdev(struct fsg_common *common,
> >  	common->ep0 = cdev->gadget->ep0;
> >  	common->ep0req = cdev->req;
> >  	common->cdev = cdev;
> > +	common->bicr = 0;
> >  
> >  	us = usb_gstrings_attach(cdev, fsg_strings_array,
> >  				 ARRAY_SIZE(fsg_strings));
> > @@ -2895,6 +2912,33 @@ static void fsg_common_release(struct fsg_common *common)
> >  		kfree(common);
> >  }
> >  
> > +#ifdef CONFIG_USB_CONFIGFS_BICR
> > +ssize_t fsg_bicr_show(struct fsg_common *common, char *buf)
> > +{
> > +	return sprintf(buf, "%d\n", common->bicr);
> > +}
> > +
> > +ssize_t fsg_bicr_store(struct fsg_common *common, const char *buf, size_t size)
> > +{
> > +	int ret;
> > +
> > +	ret = kstrtou8(buf, 10, &common->bicr);
> > +	if (ret)
> > +		return -EINVAL;
> > +
> > +	/* Set Lun[0] is a CDROM when enable bicr.*/
> > +	if (!strcmp(buf, "1"))
> > +		common->luns[0]->cdrom = 1;
> > +	else {
> > +		common->luns[0]->cdrom = 0;
> > +		common->luns[0]->blkbits = 0;
> > +		common->luns[0]->blksize = 0;
> > +		common->luns[0]->num_sectors = 0;
> > +	}
> > +
> > +	return size;
> > +}
> 
> Where do these attributes ever get exported to sysfs?
> 
> > +#endif
> >  
> >  /*-------------------------------------------------------------------------*/
> >  
> > @@ -3463,6 +3507,7 @@ void fsg_config_from_params(struct fsg_config *cfg,
> >  		lun->ro = !!params->ro[i];
> >  		lun->cdrom = !!params->cdrom[i];
> >  		lun->removable = !!params->removable[i];
> > +		lun->nofua = !!params->nofua[i];
> 
> Isn't this set already?  If not, it is a bug that has nothing to do with 
> BICR.
> 
> >  		lun->filename =
> >  			params->file_count > i && params->file[i][0]
> >  			? params->file[i]
> > diff --git a/drivers/usb/gadget/function/f_mass_storage.h b/drivers/usb/gadget/function/f_mass_storage.h
> > index 3b8c4ce2a40a..7097e2ea5cc9 100644
> > --- a/drivers/usb/gadget/function/f_mass_storage.h
> > +++ b/drivers/usb/gadget/function/f_mass_storage.h
> > @@ -140,5 +140,8 @@ void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
> >  void fsg_config_from_params(struct fsg_config *cfg,
> >  			    const struct fsg_module_parameters *params,
> >  			    unsigned int fsg_num_buffers);
> > -
> > +#ifdef CONFIG_USB_CONFIGFS_BICR
> > +ssize_t fsg_bicr_show(struct fsg_common *common, char *buf);
> > +ssize_t fsg_bicr_store(struct fsg_common *common, const char *buf, size_t size);
> > +#endif
> >  #endif /* USB_F_MASS_STORAGE_H */
> > diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c
> > index f7e6c42558eb..8fe96eeddf35 100644
> > --- a/drivers/usb/gadget/function/storage_common.c
> > +++ b/drivers/usb/gadget/function/storage_common.c
> > @@ -441,6 +441,29 @@ ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
> >  		return -EBUSY;				/* "Door is locked" */
> >  	}
> >  
> > +	pr_notice("%s file=%s, count=%d, curlun->cdrom=%d\n",
> > +			__func__, buf, (int)count, curlun->cdrom);
> 
> Another debugging line that shouldn't be present in the final patch.
> 
> > +
> > +	/*
> > +	 * WORKAROUND for Android:
> > +	 *   VOLD would clean the file path after switching to bicr.
> > +	 *   So when the lun is being a CD-ROM a.k.a. BICR.
> > +	 *   Don't clean the file path to empty.
> > +	 */
> > +	if (curlun->cdrom == 1 && count == 1)
> > +		return count;
> > +
> > +	/*
> > +	 * WORKAROUND: Should be closed the fsg lun for virtual cd-rom,
> > +	 * when switch to other usb functions.
> 
> That is not a grammatical English sentence.
> 
> > +	 * Use the special keyword "off", because the init can
> > +	 * not parse the char '\n' in rc file and write into the sysfs.
> > +	 */
> > +	if (count == 3 &&
> > +			buf[0] == 'o' && buf[1] == 'f' && buf[2] == 'f' &&
> > +			fsg_lun_is_open(curlun))
> > +		((char *) buf)[0] = 0;
> 
> This seems like another bug fix that has no connection with BICR.
> 
> Alan Stern
> 
> > +
> >  	/* Remove a trailing newline */
> >  	if (count > 0 && buf[count-1] == '\n')
> >  		((char *) buf)[count-1] = 0;		/* Ugh! */
> > -- 
> > 2.18.0

Thanks!
Macpaul Lin





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux