The QCOM SPMI typec driver handles the role and orientation detection, and
notifies client drivers using the USB role switch framework. It registers
as a typec port, so orientation can be communicated using the typec switch
APIs. The driver also registers the VBUS output regulator, so client
drivers can enable the VBUS source when acting as a source/host.
Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
---
drivers/usb/typec/Kconfig | 11 ++
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/qcom-pmic-typec.c | 278 ++++++++++++++++++++++++++++++++++++
3 files changed, 290 insertions(+)
create mode 100644 drivers/usb/typec/qcom-pmic-typec.c
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 559dd06..8de2520 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -73,6 +73,17 @@ config TYPEC_TPS6598X
If you choose to build this driver as a dynamically linked module, the
module will be called tps6598x.ko.
+config TYPEC_QCOM_PMIC
+ tristate "Qualcomm PMIC USB typec driver"
+ depends on ARCH_QCOM
+ help
+ Driver for supporting role switch over the Qualcomm PMIC. This will
+ handle the type C role and orientation detection reported by the QCOM
+ PMIC if the PMIC has the capability to handle type C detection.
+
+ It will also enable the VBUS output to connected devices when a
+ DFP connection is made.
+
source "drivers/usb/typec/mux/Kconfig"
source "drivers/usb/typec/altmodes/Kconfig"
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 7753a5c3..cceffd9 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_TYPEC_TCPM) += tcpm/
obj-$(CONFIG_TYPEC_UCSI) += ucsi/
obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o
+obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
obj-$(CONFIG_TYPEC) += mux/
diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
new file mode 100644
index 0000000..ce6319c
--- /dev/null
+++ b/drivers/usb/typec/qcom-pmic-typec.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/workqueue.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define DCDC_BASE 0x1100
+#define CMD_OTG (DCDC_BASE + 0x40)
+#define OTG_EN BIT(0)
+#define OTG_CFG (DCDC_BASE + 0x53)
+#define OTG_EN_SRC_CFG BIT(1)
+
+#define USB_BASE 0x1300
+#define TYPE_C_CFG_REG (USB_BASE + 0x58)
+#define BC12_START_ON_CC BIT(7)
+
+#define TYPEC_BASE 0x1500
+#define TYPEC_MISC_STATUS (TYPEC_BASE + 0xb)
+#define CC_ATTACHED BIT(0)
+#define CC_ORIENTATION BIT(1)
+#define SNK_SRC_MODE BIT(6)
+#define TYPEC_MODE_CFG (TYPEC_BASE + 0x44)
+#define TYPEC_DISABLE_CMD BIT(0)
+#define EN_SNK_ONLY BIT(1)
+#define EN_SRC_ONLY BIT(2)
+#define EN_TRY_SNK BIT(4)
+#define TYPEC_VCONN_CONTROL (TYPEC_BASE + 0x46)
+#define VCONN_EN_SRC BIT(0)
+#define VCONN_EN_VAL BIT(1)
+#define TYPEC_EXIT_STATE_CFG (TYPEC_BASE + 0x50)
+#define SEL_SRC_UPPER_REF BIT(2)
+#define TYPEC_INTR_EN_CFG_1 (TYPEC_BASE + 0x5e)
+#define TYPEC_INTR_EN_CFG_1_MASK GENMASK(0, 7)
+
+struct qcom_pmic_typec {
+ struct device *dev;
+ struct fwnode_handle *fwnode;
+ struct regmap *regmap;
+ struct work_struct bh_work;
+
+ struct typec_capability *cap;
+ struct typec_port *port;
+ struct usb_role_switch *role_sw;
+
+ struct regulator_desc usb_vbus_rdesc;
+ struct regulator_dev *usb_vbus_reg;
+};
+
+static int qcom_pmic_typec_vbus_enable(struct qcom_pmic_typec *qcom_usb)
+{
+ int rc;
+
+ rc = regmap_update_bits(qcom_usb->regmap, CMD_OTG, OTG_EN, OTG_EN);
+ if (rc)
+ dev_err(qcom_usb->dev, "failed to update OTG_CTL\n");
+
+ return rc;
+}
+
+static int qcom_pmic_typec_vbus_disable(struct qcom_pmic_typec *qcom_usb)
+{
+ int rc;
+
+ rc = regmap_update_bits(qcom_usb->regmap, CMD_OTG, OTG_EN, 0);
+ if (rc)
+ dev_err(qcom_usb->dev, "failed to update OTG_CTL\n");
+
+ return rc;
+}
+
+void qcom_pmic_typec_bh_work(struct work_struct *w)
+{
+ struct qcom_pmic_typec *qcom_usb = container_of(w,
+ struct qcom_pmic_typec,
+ bh_work);
+ enum typec_orientation orientation;
+ enum usb_role role;
+ unsigned int stat;
+
+ regmap_read(qcom_usb->regmap, TYPEC_MISC_STATUS, &stat);
+
+ if (stat & CC_ATTACHED) {
+ orientation = ((stat & CC_ORIENTATION) >> 1) ?
+ TYPEC_ORIENTATION_REVERSE :
+ TYPEC_ORIENTATION_NORMAL;
+ typec_set_orientation(qcom_usb->port, orientation);
+
+ role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+ if (role == USB_ROLE_HOST)
+ qcom_pmic_typec_vbus_enable(qcom_usb);
+ else
+ qcom_pmic_typec_vbus_disable(qcom_usb);
+
+ usb_role_switch_set_role(qcom_usb->role_sw, role);
+ } else {
+ usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
+ qcom_pmic_typec_vbus_disable(qcom_usb);
+ }
+}
+
+irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
+{
+ struct qcom_pmic_typec *qcom_usb = _qcom_usb;
+
+ queue_work(system_power_efficient_wq, &qcom_usb->bh_work);
+
+ return IRQ_HANDLED;
+}
+
+static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb)
+{
+ u8 mode;
+
+ regmap_update_bits(qcom_usb->regmap, TYPE_C_CFG_REG, BC12_START_ON_CC,
+ 0);
+ regmap_update_bits(qcom_usb->regmap, TYPEC_INTR_EN_CFG_1,
+ TYPEC_INTR_EN_CFG_1_MASK, 0);
+
+ if (qcom_usb->cap->type != TYPEC_PORT_DRP)
+ mode = (qcom_usb->cap->type == TYPEC_PORT_SNK) ?
+ EN_SNK_ONLY : EN_SRC_ONLY;
+ else
+ mode = EN_TRY_SNK;
+ regmap_update_bits(qcom_usb->regmap, TYPEC_MODE_CFG,
+ EN_SNK_ONLY | EN_TRY_SNK | EN_SRC_ONLY, mode);
+
+ regmap_update_bits(qcom_usb->regmap, TYPEC_VCONN_CONTROL,
+ VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
+ regmap_update_bits(qcom_usb->regmap, TYPEC_VCONN_CONTROL,
+ VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
+ regmap_update_bits(qcom_usb->regmap, TYPEC_EXIT_STATE_CFG,
+ SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
+ regmap_update_bits(qcom_usb->regmap, OTG_CFG, OTG_EN_SRC_CFG,
+ OTG_EN_SRC_CFG);
+}
+
+static int qcom_pmic_typec_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct qcom_pmic_typec *qcom_usb;
+ struct typec_capability *cap;
+ const char *buf;
+ int ret, irq, role;
+
+ qcom_usb = kzalloc(sizeof(*qcom_usb), GFP_KERNEL);
+ if (!qcom_usb)
+ return -ENOMEM;
+
+ qcom_usb->dev = dev;
+
+ qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!qcom_usb->regmap) {
+ dev_err(dev, "Failed to get regmap\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "Failed to get CC irq\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(qcom_usb->dev, irq, qcom_pmic_typec_interrupt,
+ IRQF_SHARED, "qcom-pmic-typec", qcom_usb);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not request IRQ\n");
+ return ret;
+ }
+
+ qcom_usb->fwnode = device_get_named_child_node(dev, "connector");
+ if (!qcom_usb->fwnode)
+ return -EINVAL;
+
+ cap = kzalloc(sizeof(*cap), GFP_KERNEL);
+ if (!cap) {
+ ret = -ENOMEM;
+ goto err_put_node;
+ }
+
+ ret = fwnode_property_read_string(qcom_usb->fwnode, "power-role", &buf);
+ if (!ret)
+ role = typec_find_port_power_role(buf);
+ else
+ role = TYPEC_PORT_SNK;
+ cap->type = role;
+
+ ret = fwnode_property_read_string(qcom_usb->fwnode, "data-role", &buf);
+ if (!ret)
+ role = typec_find_port_data_role(buf);
+ else
+ role = TYPEC_PORT_UFP;
+ cap->data = role;
+
+ cap->prefer_role = -1;
+ cap->fwnode = qcom_usb->fwnode;
+ qcom_usb->port = typec_register_port(dev, cap);
+ if (IS_ERR(qcom_usb->port)) {
+ dev_err(dev, "Failed to register type c port %d\n",
+ IS_ERR(qcom_usb->port));
+ ret = PTR_ERR(qcom_usb->port);
+ goto err_put_node;
+ }
+
+ qcom_usb->cap = cap;
+
+ qcom_usb->role_sw = fwnode_usb_role_switch_get(qcom_usb->fwnode);
+ if (IS_ERR(qcom_usb->role_sw)) {
+ if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get role switch\n");
+ ret = PTR_ERR(qcom_usb->role_sw);
+ goto err_typec_port;
+ }
+
+ INIT_WORK(&qcom_usb->bh_work, qcom_pmic_typec_bh_work);
+ platform_set_drvdata(pdev, qcom_usb);
+ qcom_pmic_typec_typec_hw_init(qcom_usb);
+
+ queue_work(system_power_efficient_wq, &qcom_usb->bh_work);
+
+ return 0;
+
+err_typec_port:
+ typec_unregister_port(qcom_usb->port);
+err_put_node:
+ fwnode_handle_put(qcom_usb->fwnode);
+
+ return ret;
+}
+
+static int qcom_pmic_typec_remove(struct platform_device *pdev)
+{
+ struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
+
+ cancel_work_sync(&qcom_usb->bh_work);
+ usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
+ qcom_pmic_typec_vbus_disable(qcom_usb);
+
+ typec_unregister_port(qcom_usb->port);
+ usb_role_switch_put(qcom_usb->role_sw);
+ fwnode_handle_put(qcom_usb->fwnode);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_pmic_typec_table[] = {
+ { .compatible = "qcom,pm8150b-usb-typec" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
+
+static struct platform_driver qcom_pmic_typec = {
+ .driver = {
+ .name = "qcom,pmic-typec",
+ .of_match_table = qcom_pmic_typec_table,
+ },
+ .probe = qcom_pmic_typec_probe,
+ .remove = qcom_pmic_typec_remove,
+};
+
+module_platform_driver(qcom_pmic_typec);
+
+MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
+MODULE_LICENSE("GPL v2");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
