Enable usb host port with type-A connector on imx8mp-evk board.
Signed-off-by: Li Jun <jun.li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 32 ++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 3da1fff..fbe056c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -43,6 +43,19 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ reg_usb1_host_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_host_vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_vbus>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
};
&fec {
@@ -91,6 +104,19 @@
status = "okay";
};
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usdhc2 {
assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
assigned-clock-rates = <400000000>;
@@ -172,6 +198,12 @@
>;
};
+ pinctrl_usb1_vbus: usb1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
--
2.7.4
