This reverts commit 44331189f9082c7e659697bbac1747db3def73e7. Now that the VL805 init routine is run through a reset controller driver the dependencies are being taken care of by the device core. No need to do it manually here. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> --- drivers/pci/controller/pcie-brcmstb.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 7730ea845ff2..752f5b331579 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -28,8 +28,6 @@ #include <linux/string.h> #include <linux/types.h> -#include <soc/bcm2835/raspberrypi-firmware.h> - #include "../pci.h" /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ @@ -931,26 +929,11 @@ static int brcm_pcie_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node, *msi_np; struct pci_host_bridge *bridge; - struct device_node *fw_np; struct brcm_pcie *pcie; struct pci_bus *child; struct resource *res; int ret; - /* - * We have to wait for Raspberry Pi's firmware interface to be up as a - * PCI fixup, rpi_firmware_init_vl805(), depends on it. This driver's - * probe can race with the firmware interface's (see - * drivers/firmware/raspberrypi.c) and potentially break the PCI fixup. - */ - fw_np = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); - if (fw_np && !rpi_firmware_get(fw_np)) { - of_node_put(fw_np); - return -EPROBE_DEFER; - } - of_node_put(fw_np); - bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); if (!bridge) return -ENOMEM; -- 2.26.2