Hi Felipe & Mathias, In this series, it adds cdns3 runtime PM support as well as some xhci-plat changes, and verified at NXP i.MX8QM and i.MX8QXP platforms. Patch 1-3: add main runtime PM support for cdns3 core and imx glue layer Patch 4-9: add platform data support and two quirks for xhci-plat.c. - .suspend_quirk for platform special sequence between xhci_bus_suspend and xhci_suspend. - add XHCI_SKIP_PHY_INIT quirk for skip PHY management from HCD core. Changes for v2: Add Jun Li’s reviewed-by [Patch 1 and Patch 6] Add Mathias’s acked-by [Patch 4-6] Some wakeup logic improvement [Patch 2] Add dedicated wakeup interrupt for core, and improve the commit log [Patch] Fix build error found by kbuild test robot [Patch 3] Using xhci_plat_priv quirk for skip PHY initialization [patch 7, patch 9] Some other typo and tiny improvements Changes for v1: - Add the 1st patch. Without it, the build on the usb-next will fail. - Change the subject for cover letter a little to reflect all contents. Peter Chen (9): usb: cdns3: introduce cdns3_set_phy_power API usb: cdns3: add runtime PM support usb: cdns3: imx: add glue layer runtime pm implementation usb: host: xhci-plat: add platform data support usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv usb: host: xhci-plat: delete the unnecessary code usb: host: xhci-plat: add priv quirk for skip PHY initialization usb: cdns3: host: add .suspend_quirk for xhci-plat.c usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT drivers/usb/cdns3/cdns3-imx.c | 203 ++++++++++++++++++++++++++++++-- drivers/usb/cdns3/core.c | 199 ++++++++++++++++++++++++++----- drivers/usb/cdns3/core.h | 16 +++ drivers/usb/cdns3/drd.c | 3 + drivers/usb/cdns3/gadget.c | 4 + drivers/usb/cdns3/host-export.h | 6 + drivers/usb/cdns3/host.c | 48 ++++++++ drivers/usb/host/xhci-plat.c | 36 +++++- drivers/usb/host/xhci-plat.h | 1 + drivers/usb/host/xhci.h | 1 + 10 files changed, 469 insertions(+), 48 deletions(-) -- 2.17.1
