From: Tao Ren <rentao.bupt@xxxxxxxxx>
This is a follow-on patch for commit a23be4ed8f48 ("usb: gadget: aspeed:
improve vhub port irq handling"): for_each_set_bit() is replaced with
simple for() loop because for() loop runs faster on ASPEED BMC.
Signed-off-by: Tao Ren <rentao.bupt@xxxxxxxxx>
---
drivers/usb/gadget/udc/aspeed-vhub/core.c | 10 +++-------
drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 3 +++
2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index cdf96911e4b1..be7bb64e3594 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -135,13 +135,9 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
/* Handle device interrupts */
if (istat & vhub->port_irq_mask) {
- unsigned long bitmap = istat;
- int offset = VHUB_IRQ_DEV1_BIT;
- int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports;
-
- for_each_set_bit_from(offset, &bitmap, size) {
- i = offset - VHUB_IRQ_DEV1_BIT;
- ast_vhub_dev_irq(&vhub->ports[i].dev);
+ for (i = 0; i < vhub->max_ports; i++) {
+ if (istat & VHUB_DEV_IRQ(i))
+ ast_vhub_dev_irq(&vhub->ports[i].dev);
}
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index 2e5a1ef14a75..87a5dea12d3c 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -67,6 +67,9 @@
#define VHUB_IRQ_HUB_EP0_SETUP (1 << 0)
#define VHUB_IRQ_ACK_ALL 0x1ff
+/* Downstream device IRQ mask. */
+#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVICE1 << (n))
+
/* SW reset reg */
#define VHUB_SW_RESET_EP_POOL (1 << 9)
#define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8)
--
2.17.1
