Re: [PATCH 24/28] dt-bindings: media: Convert marvell,mmp2-ccic to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 27, 2020 at 01:46:37PM -0600, Rob Herring wrote:
> On Tue, Mar 17, 2020 at 10:39:18AM +0100, Lubomir Rintel wrote:
> > Convert the marvell,mmp2-ccic binding to DT schema format using
> > json-schema.
> > 
> > Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> > ---
> >  .../bindings/media/marvell,mmp2-ccic.txt      |  50 ---------
> >  .../bindings/media/marvell,mmp2-ccic.yaml     | 102 ++++++++++++++++++
> >  2 files changed, 102 insertions(+), 50 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
> >  create mode 100644 Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
> > deleted file mode 100644
> > index 7ec2c8c8a3b98..0000000000000
> > --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
> > +++ /dev/null
> > @@ -1,50 +0,0 @@
> > -Marvell MMP2 camera host interface
> > -
> > -Required properties:
> > - - compatible: Should be "marvell,mmp2-ccic".
> > - - reg: Register base and size.
> > - - interrupts: The interrupt number.
> > - - #clock-cells: Must be 0.
> > -
> > -Optional properties:
> > - - clocks: Reference to the input clock as specified by
> > -           Documentation/devicetree/bindings/clock/clock-bindings.txt.
> > - - clock-names: Names of the clocks used; "axi" for the AXI bus interface,
> > -                "func" for the peripheral clock and "phy" for the parallel
> > -                video bus interface.
> > - - clock-output-names: Optional clock source for sensors. Shall be "mclk".
> > -
> > -Required subnodes:
> > - - port: The parallel bus interface port with a single endpoint linked to
> > -         the sensor's endpoint as described in
> > -         Documentation/devicetree/bindings/media/video-interfaces.txt.
> > -
> > -Required endpoint properties:
> > - - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively
> > - - pclk-sample: pixel clock polarity
> > - - hsync-active: horizontal synchronization polarity (only required for
> > -   parallel bus)
> > - - vsync-active: vertical synchronization polarity (only required for
> > -   parallel bus)
> > -
> > -Example:
> > -
> > -	camera0: camera@d420a000 {
> > -		compatible = "marvell,mmp2-ccic";
> > -		reg = <0xd420a000 0x800>;
> > -		interrupts = <42>;
> > -		clocks = <&soc_clocks MMP2_CLK_CCIC0>;
> > -		clock-names = "axi";
> > -		#clock-cells = <0>;
> > -		clock-output-names = "mclk";
> > -
> > -		port {
> > -			camera0_0: endpoint {
> > -				remote-endpoint = <&ov7670_0>;
> > -                                bus-type = <5>;      /* Parallel */
> > -                                hsync-active = <1>;  /* Active high */
> > -                                vsync-active = <1>;  /* Active high */
> > -                                pclk-sample = <0>;   /* Falling */
> > -			};
> > -		};
> > -	};
> > diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> > new file mode 100644
> > index 0000000000000..890a3f9d0302f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> > @@ -0,0 +1,102 @@
> > +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> 
> GPL-2.0-only please. Dual license only if you have rights on the old 
> file to do so.

I do. I wrote the original binding file.

> > +# Copyright 2019,2020 Lubomir Rintel <lkundrak@xxxxx>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Marvell MMP2 camera host interface bindings
> > +
> > +maintainers:
> > +  - Lubomir Rintel <lkundrak@xxxxx>
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: '^camera@[a-f0-9]+$'
> > +
> > +  compatible:
> > +    const: marvell,mmp2-ccic
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  port:
> > +    type: object
> > +    additionalProperties: false
> > +
> > +    properties:
> > +       endpoint:
> 
> Wrong indentaion.
> 
> > +         type: object
> > +         additionalProperties: false
> > +
> > +         # Properties described in
> > +         # Documentation/devicetree/bindings/media/video-interfaces.txt
> > +         properties:
> > +           remote-endpoint: true
> > +           hsync-active: true
> > +           vsync-active: true
> > +           pclk-sample: true
> > +           bus-type: true
> > +
> > +         required:
> > +           - remote-endpoint
> > +
> > +    required:
> > +      - endpoint
> > +
> > +  clocks:
> > +    minItems: 1
> > +    maxItems: 3
> 
> Shouldn't really be variable for a single compatible.
> 
> > +    items:
> > +      - description: AXI bus interface clock
> > +      - description: Peripheral clock
> > +      - description: Parallel video bus interface clock
> > +
> > +  clock-names:
> > +    minItems: 1
> > +    maxItems: 3
> > +    items:
> > +      - const: axi
> > +      - const: func
> > +      - const: phy
> > +
> > +  '#clock-cells':
> > +    const: 0
> > +
> > +  clock-output-names:
> > +    const: mclk
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - port
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/marvell,mmp2.h>
> > +
> > +    camera@d420a000 {
> > +      compatible = "marvell,mmp2-ccic";
> > +      reg = <0xd420a000 0x800>;
> > +      interrupts = <42>;
> > +      clocks = <&soc_clocks MMP2_CLK_CCIC0>;
> > +      clock-names = "axi";
> > +      #clock-cells = <0>;
> > +      clock-output-names = "mclk";
> > +
> > +      port {
> > +        camera0_0: endpoint {
> > +          remote-endpoint = <&ov7670_0>;
> > +          bus-type = <5>;      /* Parallel */
> > +          hsync-active = <1>;  /* Active high */
> > +          vsync-active = <1>;  /* Active high */
> > +          pclk-sample = <0>;   /* Falling */
> > +        };
> > +      };
> > +    };
> > +
> > +...
> > -- 
> > 2.25.1
> > 



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux