On 11.5.2020 17.25, Lorenzo Pieralisi wrote: > On Tue, May 05, 2020 at 06:13:17PM +0200, Nicolas Saenz Julienne wrote: >> On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be >> loaded directly from an EEPROM or, if not present, by the SoC's >> VideoCore. Inform VideoCore that VL805 was just reset. >> >> Also, as this creates a dependency between USB_PCI and VideoCore's >> firmware interface, and since USB_PCI can't be set as a module neither >> this can. Reflect that on the firmware interface Kconfg. >> >> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> >> --- >> >> Changes since v5: >> - Fix Kconfig issue with allmodconfig >> >> Changes since v4: >> - Do not split up error message >> >> Changes since v3: >> - Add more complete error message >> >> Changes since v1: >> - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it >> gets compiled when needed. >> >> drivers/firmware/Kconfig | 3 ++- >> drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++ >> 2 files changed, 18 insertions(+), 1 deletion(-) > > Hi Mathias, > > I would need your ACK to merge this series, thanks. > > Lorenzo Ah, yes, of course Acked-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
