RE: [PATCH v8 1/5] usb: xhci: Change the XHCI link order in the Makefile

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Al,

> From: Al Cooper, Sent: Saturday, May 9, 2020 6:19 AM
> 
> Some BRCMSTB USB chips have an XHCI, EHCI and OHCI controller
> on the same port where XHCI handles 3.0 devices, EHCI handles 2.0
> devices and OHCI handles <2.0 devices. Currently the Makefile
> has XHCI linking at the bottom which will result in the XHIC driver
> initalizing after the EHCI and OHCI drivers and any installed 3.0
> device will be seen as a 2.0 device. Moving the XHCI linking
> above the EHCI and OHCI linking fixes the issue.
> 
> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>

I tested on my environment (r8a77951 and r8a77961) and then
I didn't detect any regression. So,

Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

Best regards,
Yoshihiro Shimoda





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux