From: "K V, Abhilash" <abhilash.k.v@xxxxxxxxx>
EC firmware on Dell XPS & Latitude series does not set "Power Operation
Mode Change" bit in "Connector Status change" field of MESSAGE IN Data
while transitioning from type-C current to PD mode.
Instead the "Negotiated Power Level Change" bit is set when the "Power
Operation Mode" field shows the correct mode (i.e. PD).
This patch adds a check for this bit also, to trigger an update of
power operation mode in class driver, while handling GET_CONNECTOR_STATUS
command.
Signed-off-by: K V, Abhilash <abhilash.k.v@xxxxxxxxx>
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
drivers/usb/typec/ucsi/ucsi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index e9baa9a749e5..0c7c3f9b1b50 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -613,7 +613,8 @@ static void ucsi_handle_connector_change(struct work_struct *work)
role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR);
- if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE)
+ if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE ||
+ con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE)
ucsi_pwr_opmode_change(con);
if (con->status.change & UCSI_CONSTAT_POWER_DIR_CHANGE) {
--
2.26.1
