On 19.03.20 11:02, Martin Kepplinger wrote: > The DRD module calls dwc3_set_mode() on role switches, i.e. when a device is > being plugged in. In order to support continuous runtime power management when > plugging in / unplugging a cable, we need to call pm_runtime_get_sync() in > this path. > > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> > --- > > > revision history > ---------------- > v3: call pm_runtime_get_sync() and fix commit message typo (thanks Sergei) > v2: move pm_rumtime calls into workqueue (thanks Roger) > remove unrelated documentation patch > https://lore.kernel.org/linux-usb/7a085229-68a7-d700-1781-14225863a228@xxxxxxxxxxxxxxxxxx/T/ > v1: https://lore.kernel.org/linux-usb/ef22f8de-9bfd-c1d5-111c-696f1336dbda@xxxxxxx/T/ > > > drivers/usb/dwc3/core.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 1d85c42b9c67..da93faef74a6 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -121,17 +121,19 @@ static void __dwc3_set_mode(struct work_struct *work) > if (dwc->dr_mode != USB_DR_MODE_OTG) > return; > > + pm_runtime_get_sync(dwc->dev); > + > if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG) > dwc3_otg_update(dwc, 0); > > if (!dwc->desired_dr_role) > - return; > + goto out; > > if (dwc->desired_dr_role == dwc->current_dr_role) > - return; > + goto out; > > if (dwc->desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev) > - return; > + goto out; > > switch (dwc->current_dr_role) { > case DWC3_GCTL_PRTCAP_HOST: > @@ -190,6 +192,9 @@ static void __dwc3_set_mode(struct work_struct *work) > break; > } > > +out: > + pm_runtime_mark_last_busy(dwc->dev); > + pm_runtime_put_autosuspend(dwc->dev); > } > > void dwc3_set_mode(struct dwc3 *dwc, u32 mode) > any objections or other thoughts about this? I'm using it successfully. thanks, martin