Convert the sdhci-pxa binding to DT schema format using json-schema.
At the same time, fix a couple of issues with the examples discovered by
the validation tool -- a semicolon instead of a comma and wrong node names.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
.../devicetree/bindings/mmc/sdhci-pxa.txt | 50 ---------
.../devicetree/bindings/mmc/sdhci-pxa.yaml | 101 ++++++++++++++++++
2 files changed, 101 insertions(+), 50 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
deleted file mode 100644
index 3d1b449d6097d..0000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Marvell sdhci-pxa v2/v3 controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
-
-Required properties:
-- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
- "marvell,armada-380-sdhci".
-- reg:
- * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
- the SDHCI registers.
-
- * for "marvell,armada-380-sdhci", three register areas. The first
- one for the SDHCI registers themselves, the second one for the
- AXI/Mbus bridge registers of the SDHCI unit, the third one for the
- SDIO3 Configuration register
-- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
- for "marvell,armada-380-sdhci"
-- clocks: Array of clocks required for SDHCI; requires at least one for
- I/O clock.
-- clock-names: Array of names corresponding to clocks property; shall be
- "io" for I/O clock and "core" for optional core clock.
-
-Optional properties:
-- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
-
-Example:
-
-sdhci@d4280800 {
- compatible = "mrvl,pxav3-mmc";
- reg = <0xd4280800 0x800>;
- bus-width = <8>;
- interrupts = <27>;
- clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
- clock-names = "io", "core";
- non-removable;
- mrvl,clk-delay-cycles = <31>;
-};
-
-sdhci@d8000 {
- compatible = "marvell,armada-380-sdhci";
- reg-names = "sdhci", "mbus", "conf-sdio3";
- reg = <0xd8000 0x1000>,
- <0xdc000 0x100>;
- <0x18454 0x4>;
- interrupts = <0 25 0x4>;
- clocks = <&gateclk 17>;
- clock-names = "io";
- mrvl,clk-delay-cycles = <0x1F>;
-};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
new file mode 100644
index 0000000000000..4ae0926ac294f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -0,0 +1,101 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA SDHCI v2/v3 bindings
+
+maintainers:
+ - devicetree@xxxxxxxxxxxxxxx
+
+allOf:
+ - $ref: mmc-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,armada-380-sdhci
+ then:
+ properties:
+ regs:
+ minItems: 3
+ maxItems: 3
+ reg-names:
+ items:
+ - const: sdhci
+ - const: mbus
+ - const: conf-sdio3
+ required:
+ - reg-names
+ else:
+ properties:
+ regs:
+ minItems: 1
+ maxItems: 1
+ reg-names:
+ minItems: 1
+ maxItems: 1
+
+properties:
+ compatible:
+ enum:
+ - mrvl,pxav2-mmc
+ - mrvl,pxav3-mmc
+ - marvell,armada-380-sdhci
+
+ reg: true
+
+ reg-names: true
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: io
+ - const: core
+
+ mrvl,clk-delay-cycles:
+ description: Specify a number of cycles to delay for tuning.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/berlin2.h>
+ mmc@d4280800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xd4280800 0x800>;
+ bus-width = <8>;
+ interrupts = <27>;
+ clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clock-names = "io", "core";
+ non-removable;
+ mrvl,clk-delay-cycles = <31>;
+ };
+ - |
+ mmc@d8000 {
+ compatible = "marvell,armada-380-sdhci";
+ reg-names = "sdhci", "mbus", "conf-sdio3";
+ reg = <0xd8000 0x1000>,
+ <0xdc000 0x100>,
+ <0x18454 0x4>;
+ interrupts = <0 25 0x4>;
+ clocks = <&gateclk 17>;
+ clock-names = "io";
+ mrvl,clk-delay-cycles = <0x1F>;
+ };
+
+...
--
2.25.1
