Hi Greg
A set of xhci features for usb-next.
Turning on LPM support for a couple controllers, and finishing USB3
root port suspend and resume requests based on actual port link
states transitions instead of waiting for some default time.
-Mathias
JC Kuo (1):
usb: host: xhci-tegra: Tegra186/Tegra194 LPM
Kai-Heng Feng (2):
xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3
xhci: Wait until link state trainsits to U0 after setting
USB_SS_PORT_LS_U0
Mathias Nyman (4):
xhci: bail out early if driver can't accress host in resume
xhci: Add a separate debug message for split transaction errors.
xhci: Show host status when watchdog triggers and host is assumed
dead.
xhci: Finetune host initiated USB3 rootport link suspend and resume
Mika Westerberg (1):
xhci-pci: Allow host runtime PM as default for Intel Tiger Lake xHCI
Nicolas Saenz Julienne (1):
usb: xhci: Enable LPM for VIA LABS VL805
drivers/usb/host/xhci-hub.c | 61 +++++++++++++++++++++++++++++------
drivers/usb/host/xhci-mem.c | 1 +
drivers/usb/host/xhci-pci.c | 7 +++-
drivers/usb/host/xhci-ring.c | 9 ++++++
drivers/usb/host/xhci-tegra.c | 7 ++++
drivers/usb/host/xhci.c | 4 ++-
drivers/usb/host/xhci.h | 30 +++++++++++++++++
7 files changed, 107 insertions(+), 12 deletions(-)
--
2.17.1
