On 20-03-07 16:51:48, Otavio Salvador wrote: > Sorry, here is the log withoiut any out-of-tree module: > > [root@rv1108 ~]# modprobe -r g_serial > [ 86.928476] 8<--- cut here --- > [ 86.928781] Unable to handle kernel NULL pointer dereference at > virtual address 000000d4 > [ 86.929511] pgd = 2c058c2d > [ 86.929766] [000000d4] *pgd=6591f835, *pte=00000000, *ppte=00000000 > [ 86.930350] Internal error: Oops: 17 [#1] SMP ARM > [ 86.930778] Modules linked in: usb_f_acm u_serial g_serial(-) > libcomposite configfs zram zsmalloc clk_rk808 rtc_rk808 spi_rockchip > [ 86.931872] CPU: 0 PID: 498 Comm: sat Not tainted 5.4.23 #41 > [ 86.932376] Hardware name: Rockchip (Device Tree) > [ 86.932818] PC is at _raw_spin_lock_irq+0x8/0x44 > [ 86.933254] LR is at gs_close+0x28/0x1e4 [u_serial] > [ 86.933696] pc : [<c08483b0>] lr : [<bf03fd28>] psr: a00e0093 > [ 86.934255] sp : c5c05d38 ip : 00005401 fp : ffffffed > [ 86.934724] r10: c6716db8 r9 : 00000000 r8 : c096d664 > [ 86.935191] r7 : c5c07b40 r6 : 000000d4 r5 : c0d05c88 r4 : 00000000 > [ 86.935774] r3 : 79f4b188 r2 : c63ca600 r1 : c5c07b40 r0 : 000000d4 > [ 86.936366] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM > Segment none > [ 86.937010] Control: 10c5387d Table: 65be406a DAC: 00000051 > [ 86.937528] Process sat (pid: 498, stack limit = 0x87e8ad9f) > [ 86.938041] Stack: (0xc5c05d38 to 0xc5c06000) > [ 86.938440] 5d20: > 0f300000 c6716db8 > [ 86.939172] 5d40: c5c07b40 c63ca600 c5c07b40 79f4b188 c63ca600 > 00000000 c0ae9318 c5c07b40 > [ 86.939904] 5d60: c096d664 00000000 c6716db8 c04f47cc 00000000 > c04fc400 c63ca600 00000000 > [ 86.940637] 5d80: 00000000 c63ca600 c5c07b40 c0ae9318 c5c04000 > c096d664 0f300000 c6716db8 > [ 86.941370] 5da0: ffffffed c04f66a0 800e0093 00000902 c0d8ecd8 > c593d180 c0d05c88 00000081 > [ 86.942101] 5dc0: 00000000 79f4b188 00000000 c096d6e4 c0d05c88 > c5910e40 00000000 c6716db8 > [ 86.942833] 5de0: c5c07b40 00000000 c5c07b40 c02b3250 c5c05ec0 > 79f4b188 c5c05ec0 c5c07b40 > [ 86.943565] 5e00: c6716db8 c5c07b48 c02b3174 00000006 c6716db8 > c02aa874 c5c05ec0 00000000 > [ 86.944296] 5e20: 00000902 00000000 00000000 00000006 c6716db8 > c02bd920 c0161a04 00000100 > [ 86.945029] 5e40: 00000000 000041ed 00000000 00000000 c0d05c88 > 00000041 00000000 c014fc70 > [ 86.945761] 5e60: ffffe000 00000000 c0a7273c c0152494 600e0013 > c5813b90 00000002 c6716db8 > [ 86.946493] 5e80: c708b9d0 c6ef1bb0 00000000 c5813b7c c0a6abdc > 79f4b188 c0d8ecd8 c0d05c88 > [ 86.947225] 5ea0: c0d05c88 c5c05f70 00000001 fffff000 c5c04000 > 00000142 b63a3874 c02bf5f0 > [ 86.947958] 5ec0: c708b9d0 c6ef1bb0 ad6e75ef 00000006 c70da015 > c6371e40 00000000 c6cba6e8 > [ 86.948689] 5ee0: c6716db8 00000101 00000002 00000054 00000000 > 00000000 00000000 c5c05f00 > [ 86.949424] 5f00: c583b600 c583ba58 00000000 c0843628 c583ba40 > c583b600 c0d05c88 c01556a8 > [ 86.950155] 5f20: ffffe000 79f4b188 00000011 00000020 c70da000 > 00000000 00000000 00000002 > [ 86.950890] 5f40: ffffff9c c02cea14 00000902 79f4b188 ffffff9c > 00000011 c0d05c88 ffffff9c > [ 86.951622] 5f60: c70da000 c02abd18 00000000 79f4b188 00000902 > c0150000 00000006 00000100 > [ 86.952355] 5f80: 00000001 79f4b188 003e75dc 00677470 00000011 > 00000142 c0101204 c5c04000 > [ 86.953088] 5fa0: 00000142 c0101000 003e75dc 00677470 ffffff9c > 003e75dc 00000902 00000000 > [ 86.953824] 5fc0: 003e75dc 00677470 00000011 00000142 b57ff011 > 00020000 00020000 b63a3874 > [ 86.954555] 5fe0: 00000002 b63a3688 b65a48d0 b6fa567c 600e0010 > ffffff9c 00000000 00000000 > [ 86.955312] [<c08483b0>] (_raw_spin_lock_irq) from [<bf03fd28>] > (gs_close+0x28/0x1e4 [u_serial]) > [ 86.956121] [<bf03fd28>] (gs_close [u_serial]) from [<c04f47cc>] > (tty_release+0xf0/0x47c) > [ 86.956864] [<c04f47cc>] (tty_release) from [<c04f66a0>] > (tty_open+0x118/0x3fc) > [ 86.957528] [<c04f66a0>] (tty_open) from [<c02b3250>] > (chrdev_open+0xdc/0x1a8) > [ 86.958184] [<c02b3250>] (chrdev_open) from [<c02aa874>] > (do_dentry_open+0x21c/0x3f0) > [ 86.958898] [<c02aa874>] (do_dentry_open) from [<c02bd920>] > (path_openat+0x470/0x1174) > [ 86.959615] [<c02bd920>] (path_openat) from [<c02bf5f0>] > (do_filp_open+0x70/0xdc) > [ 86.960293] [<c02bf5f0>] (do_filp_open) from [<c02abd18>] > (do_sys_open+0x180/0x214) > [ 86.960985] [<c02abd18>] (do_sys_open) from [<c0101000>] > (ret_fast_syscall+0x0/0x54) > [ 86.961671] Exception stack(0xc5c05fa8 to 0xc5c05ff0) > [ 86.962130] 5fa0: 003e75dc 00677470 ffffff9c > 003e75dc 00000902 00000000 > [ 86.962863] 5fc0: 003e75dc 00677470 00000011 00000142 b57ff011 > 00020000 00020000 b63a3874 > [ 86.963591] 5fe0: 00000002 b63a3688 b65a48d0 b6fa567c > [ 86.964054] Code: f57ff05b e12fff1e f10c0080 f590f000 (e1903f9f) > [ 86.964603] ---[ end trace 2e9f93ef91ffad40 ]--- > [root@rv1108 ~]# > Did you run any applications on it? I can't trigger it by using the latest usb-linus tree, no matter the connection is there or not. Peter > Thanks > > On Fri, Mar 6, 2020 at 10:54 PM Otavio Salvador <otavio@xxxxxxxxxxxxxxxx> wrote: > > > > Hi, > > > > Running kernel 5.4.23 on a RV1108 based board the following issue is > > seen when removing the g_serial module. > > > > [root@rv1108 ~]# rmmod g_serial > > [root@rv1108 ~]# > > [ 78.090775] ------------[ cut here ]------------ > > [ 78.091252] WARNING: CPU: 0 PID: 617 at > > drivers/usb/gadget/function/u_serial.c:706 gs_close+0x8c/0x1e4 > > [u_serial] > > [ 78.092164] Modules linked in: usb_f_acm u_serial libcomposite > > configfs zram zsmalloc emlog(O) wdtoken(O) clk_rk808 rtc_rk808 > > spi_rockchip [last unloaded: g_serial] > > [ 78.093529] CPU: 0 PID: 617 Comm: nm-online Tainted: G O > > 5.4.23 #41 > > [ 78.094198] Hardware name: Rockchip (Device Tree) > > [ 78.094655] [<c0111100>] (unwind_backtrace) from [<c010c638>] > > (show_stack+0x10/0x14) > > [ 78.095363] [<c010c638>] (show_stack) from [<c082b19c>] > > (dump_stack+0xc0/0xd4) > > [ 78.096027] [<c082b19c>] (dump_stack) from [<c01357c8>] (__warn+0xe0/0xf8) > > [ 78.096655] [<c01357c8>] (__warn) from [<c0135890>] > > (warn_slowpath_fmt+0xb0/0xb8) > > [ 78.097341] [<c0135890>] (warn_slowpath_fmt) from [<bf04ad8c>] > > (gs_close+0x8c/0x1e4 [u_serial]) > > [ 78.098137] [<bf04ad8c>] (gs_close [u_serial]) from [<c04f47cc>] > > (tty_release+0xf0/0x47c) > > [ 78.098877] [<c04f47cc>] (tty_release) from [<c02afb14>] (__fput+0x88/0x214) > > [ 78.099517] [<c02afb14>] (__fput) from [<c01556a4>] (task_work_run+0xa4/0xc8) > > [ 78.100164] [<c01556a4>] (task_work_run) from [<c01397a4>] > > (do_exit+0x3e4/0xac8) > > [ 78.100835] [<c01397a4>] (do_exit) from [<c013ad04>] > > (do_group_exit+0x3c/0xc8) > > [ 78.101486] [<c013ad04>] (do_group_exit) from [<c013ada0>] > > (__wake_up_parent+0x0/0x18) > > [ 78.102190] ---[ end trace f34de27d5eaf8688 ]--- > > > > Looks like port.count is not being correctly handled. > > > > Does anyone have any suggestions on how we could fix this? > > > > Thanks > > > > -- > > Otavio Salvador O.S. Systems > > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ossystems.com.br&data=02%7C01%7Cpeter.chen%40nxp.com%7Ced20bf39cd26466f004008d7c2d10414%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637192075282592940&sdata=UiYXQuxW%2BA95IorbdZm4GMp%2BYd8npRF5mp5mOeFcpbs%3D&reserved=0 https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcode.ossystems.com.br&data=02%7C01%7Cpeter.chen%40nxp.com%7Ced20bf39cd26466f004008d7c2d10414%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637192075282592940&sdata=wsaXtyIqj9h46wnfqlwLCjUtBbG7n7%2BOjailDbGbATA%3D&reserved=0 > > Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750 > > > > -- > Otavio Salvador O.S. Systems > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ossystems.com.br&data=02%7C01%7Cpeter.chen%40nxp.com%7Ced20bf39cd26466f004008d7c2d10414%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637192075282592940&sdata=UiYXQuxW%2BA95IorbdZm4GMp%2BYd8npRF5mp5mOeFcpbs%3D&reserved=0 https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcode.ossystems.com.br&data=02%7C01%7Cpeter.chen%40nxp.com%7Ced20bf39cd26466f004008d7c2d10414%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637192075282592940&sdata=wsaXtyIqj9h46wnfqlwLCjUtBbG7n7%2BOjailDbGbATA%3D&reserved=0 > Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750 -- Thanks, Peter Chen
