This set adds DT entries for the Primary and Secondary DWC3 controllers on QCS404 and the PHYs attached to those controllers. Additional board-specific bindings are required to make the SoC change functional on the EVBs as on the EVB a type-c connector interfaces with the SoC which is responsible to toggle VBUS via a regulator interface directly. These patches have been through seven review cycles already and have a number of Review-by and Ack-by. For the pusposes of making it easier to merge this set focuses on the SoC DT bindings and target board bindings alone. The last set for can be found here: https://lkml.org/lkml/2020/3/3/807 Bjorn Andersson (1): arm64: dts: qcom: qcs404: Add USB devices and PHYs Bryan O'Donoghue (5): arm64: dts: qcom: qcs404-evb: Define VBUS pins arm64: dts: qcom: qcs404-evb: Define USB ID pin arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage arm64: dts: qcom: qcs404-evb: Enable USB controllers arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 90 +++++++++++++++++++- arch/arm64/boot/dts/qcom/qcs404.dtsi | 100 +++++++++++++++++++++++ 2 files changed, 189 insertions(+), 1 deletion(-) -- 2.25.1
