Exynos5422 DWC3 module support two clk USBD300 and SCLK_USBD300
so add missing code to enable/disable code and suspend clk, for this
add a new compatible samsung,exynos5420-dwusb3 to help configure
dwc3 code and dwc3 suspend clock. Suspend clock controls the PHY power
change from P0 to P1/P2/P3 during U0 to U1/U2/U3 transition.
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
drivers/usb/dwc3/dwc3-exynos.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 90bb022737da..48b68b6f0dc8 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -162,6 +162,12 @@ static const struct dwc3_exynos_driverdata exynos5250_drvdata = {
.suspend_clk_idx = -1,
};
+static const struct dwc3_exynos_driverdata exynos5420_drvdata = {
+ .clk_names = { "usbdrd30", "usbdrd30_susp_clk"},
+ .num_clks = 2,
+ .suspend_clk_idx = 1,
+};
+
static const struct dwc3_exynos_driverdata exynos5433_drvdata = {
.clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" },
.num_clks = 4,
@@ -178,6 +184,9 @@ static const struct of_device_id exynos_dwc3_match[] = {
{
.compatible = "samsung,exynos5250-dwusb3",
.data = &exynos5250_drvdata,
+ }, {
+ .compatible = "samsung,exynos5420-dwusb3",
+ .data = &exynos5420_drvdata,
}, {
.compatible = "samsung,exynos5433-dwusb3",
.data = &exynos5433_drvdata,
--
2.25.1
