On Dell TB16, Realtek USB ethernet (r8152) connects to an SMSC hub which then connects to ASMedia xHCI's root hub: /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/7p, 5000M |__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 002: ID 0424:5537 Standard Microsystems Corp. USB5537B Bus 004 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter The port is disabled after resume: xhci_hcd 0000:3f:00.0: Get port status 4-1 read: 0x280, return 0x280 According to xHCI 4.19.1.2.1, we should set link to RxDetect to transit it from disabled state to disconnected state, which allows the port to be set to U0 and completes the resume process. Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> --- P.S. This is and differnt (and should be more correct) approach to solve https://lore.kernel.org/lkml/20191129174115.31683-1-kai.heng.feng@xxxxxxxxxxxxx/ drivers/usb/core/hub.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 54cd8ef795ec..352e33c84d6a 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3537,12 +3537,24 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) /* Skip the initial Clear-Suspend step for a remote wakeup */ status = hub_port_status(hub, port1, &portstatus, &portchange); - if (status == 0 && !port_is_suspended(hub, portstatus)) { + if (status == 0 && !port_is_suspended(hub, portstatus) + && (portstatus & USB_PORT_STAT_ENABLE)) { if (portchange & USB_PORT_STAT_C_SUSPEND) pm_wakeup_event(&udev->dev, 0); goto SuspendCleared; } + /* xHCI 4.19.1.2.1 */ + if (hub_is_superspeed(hub->hdev)) { + if (!(portstatus & USB_PORT_STAT_ENABLE)) + status = hub_set_port_link_state(hub, port1, + USB_SS_PORT_LS_RX_DETECT); + + if (status) + dev_dbg(&port_dev->dev, + "can't set to RxDetect, status %d\n", status); + } + /* see 7.1.7.7; affects power usage, but not budgeting */ if (hub_is_superspeed(hub->hdev)) status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0); -- 2.17.1