Re: [PATCH] dt-bindings: Convert usb-connector to YAML format.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 4, 2020 at 11:50 AM Prashant Malani <pmalani@xxxxxxxxxxxx> wrote:
>
> Convert the usb-connector.txt bindings file to YAML format. This allows
> it to be used in dt_bindings_check verification. This patch was
> born out of a patch series for the addition of a Type C connector
> class port driver[1].
>
> An attempt has been made to maintain the same documentation text and
> example structure as was in the .txt file, but wherever needed
> modifications have been made to satisfy dt_bindings_check.
>
> Also, update all references to usb-connector.txt to now use
> usb-connector.yaml.
>
> [1]: https://lkml.org/lkml/2020/2/19/1232
>
> Signed-off-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
> ---
>  .../connector/samsung,usb-connector-11pin.txt |   2 +-
>  .../bindings/connector/usb-connector.txt      | 135 ------------
>  .../bindings/connector/usb-connector.yaml     | 193 ++++++++++++++++++
>  .../devicetree/bindings/usb/fcs,fusb302.txt   |   2 +-
>  .../devicetree/bindings/usb/generic.txt       |   2 +-
>  .../devicetree/bindings/usb/mediatek,mtu3.txt |   2 +-
>  .../devicetree/bindings/usb/mediatek,musb.txt |   2 +-
>  .../bindings/usb/richtek,rt1711h.txt          |   2 +-
>  .../devicetree/bindings/usb/ti,hd3ss3220.txt  |   2 +-
>  .../devicetree/bindings/usb/typec-tcpci.txt   |   2 +-
>  .../devicetree/bindings/usb/usb-conn-gpio.txt |   4 +-
>  11 files changed, 203 insertions(+), 145 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/connector/usb-connector.txt
>  create mode 100644 Documentation/devicetree/bindings/connector/usb-connector.yaml
>
> diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
> index 22256e295a7a1..3dd8961154abf 100644
> --- a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
> +++ b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
> @@ -19,7 +19,7 @@ Required nodes:
>      0: High Speed (HS),
>      3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
>
> -[1]: bindings/connector/usb-connector.txt
> +[1]: bindings/connector/usb-connector.yaml
>
>  Example
>  -------
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
> deleted file mode 100644
> index 88578ac1a8a76..0000000000000
> --- a/Documentation/devicetree/bindings/connector/usb-connector.txt
> +++ /dev/null
> @@ -1,135 +0,0 @@
> -USB Connector
> -=============
> -
> -A USB connector node represents a physical USB connector. It should be
> -a child of a USB interface controller.
> -
> -Required properties:
> -- compatible: describes type of the connector, must be one of:
> -    "usb-a-connector",
> -    "usb-b-connector",
> -    "usb-c-connector".
> -
> -Optional properties:
> -- label: symbolic name for the connector,
> -- type: size of the connector, should be specified in case of USB-A, USB-B
> -  non-fullsize connectors: "mini", "micro".
> -- self-powered: Set this property if the usb device that has its own power
> -  source.
> -
> -Optional properties for usb-b-connector:
> -- id-gpios: an input gpio for USB ID pin.
> -- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of
> -  VBUS 5V.
> -  see gpio/gpio.txt.
> -- vbus-supply: a phandle to the regulator for USB VBUS if needed when host
> -  mode or dual role mode is supported.
> -  Particularly, if use an output GPIO to control a VBUS regulator, should
> -  model it as a regulator.
> -  see regulator/fixed-regulator.yaml
> -- pinctrl-names : a pinctrl state named "default" is optional
> -- pinctrl-0 : pin control group
> -  see pinctrl/pinctrl-bindings.txt
> -
> -Optional properties for usb-c-connector:
> -- power-role: should be one of "source", "sink" or "dual"(DRP) if typec
> -  connector has power support.
> -- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK
> -  or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC.
> -- data-role: should be one of "host", "device", "dual"(DRD) if typec
> -  connector supports USB data.
> -
> -Required properties for usb-c-connector with power delivery support:
> -- source-pdos: An array of u32 with each entry providing supported power
> -  source data object(PDO), the detailed bit definitions of PDO can be found
> -  in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
> -  Source_Capabilities Message, the order of each entry(PDO) should follow
> -  the PD spec chapter 6.4.1. Required for power source and power dual role.
> -  User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
> -  defined in dt-bindings/usb/pd.h.
> -- sink-pdos: An array of u32 with each entry providing supported power
> -  sink data object(PDO), the detailed bit definitions of PDO can be found
> -  in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
> -  Sink Capabilities Message, the order of each entry(PDO) should follow
> -  the PD spec chapter 6.4.1. Required for power sink and power dual role.
> -  User can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
> -  in dt-bindings/usb/pd.h.
> -- op-sink-microwatt: Sink required operating power in microwatt, if source
> -  can't offer the power, Capability Mismatch is set. Required for power
> -  sink and power dual role.
> -
> -Required nodes:
> -- any data bus to the connector should be modeled using the OF graph bindings
> -  specified in bindings/graph.txt, unless the bus is between parent node and
> -  the connector. Since single connector can have multiple data buses every bus
> -  has assigned OF graph port number as follows:
> -    0: High Speed (HS), present in all connectors,
> -    1: Super Speed (SS), present in SS capable connectors,
> -    2: Sideband use (SBU), present in USB-C.
> -
> -Examples
> ---------
> -
> -1. Micro-USB connector with HS lines routed via controller (MUIC):
> -
> -muic-max77843@66 {
> -       ...
> -       usb_con: connector {
> -               compatible = "usb-b-connector";
> -               label = "micro-USB";
> -               type = "micro";
> -       };
> -};
> -
> -2. USB-C connector attached to CC controller (s2mm005), HS lines routed
> -to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
> -DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
> -
> -ccic: s2mm005@33 {
> -       ...
> -       usb_con: connector {
> -               compatible = "usb-c-connector";
> -               label = "USB-C";
> -
> -               ports {
> -                       #address-cells = <1>;
> -                       #size-cells = <0>;
> -
> -                       port@0 {
> -                               reg = <0>;
> -                               usb_con_hs: endpoint {
> -                                       remote-endpoint = <&max77865_usbc_hs>;
> -                               };
> -                       };
> -                       port@1 {
> -                               reg = <1>;
> -                               usb_con_ss: endpoint {
> -                                       remote-endpoint = <&usbdrd_phy_ss>;
> -                               };
> -                       };
> -                       port@2 {
> -                               reg = <2>;
> -                               usb_con_sbu: endpoint {
> -                                       remote-endpoint = <&dp_aux>;
> -                               };
> -                       };
> -               };
> -       };
> -};
> -
> -3. USB-C connector attached to a typec port controller(ptn5110), which has
> -power delivery support and enables drp.
> -
> -typec: ptn5110@50 {
> -       ...
> -       usb_con: connector {
> -               compatible = "usb-c-connector";
> -               label = "USB-C";
> -               power-role = "dual";
> -               try-power-role = "sink";
> -               source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
> -               sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
> -                            PDO_VAR(5000, 12000, 2000)>;
> -               op-sink-microwatt = <10000000>;
> -       };
> -};
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> new file mode 100644
> index 0000000000000..f0fac9bd63364
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> @@ -0,0 +1,193 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/connector/usb-connector.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: USB Connector
> +
> +maintainers:
> +  - linux-usb@xxxxxxxxxxxxxxx
> +
> +description:
> +  A USB connector node represents a physical USB connector. It should be a child
> +  of a USB interface controller.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - usb-a-connector
> +      - usb-b-connector
> +      - usb-c-connector
> +
> +  label:
> +    description: Symbolic name for the connector.
> +
> +  type:
> +    description: Size of the connector, should be specified in case of USB-A,
> +      USB-B non-fullsize connectors.
> +    enum:
> +      - mini
> +      - micro

Needs a type reference.

> +
> +  self-powered:
> +    description: Set this property if the USB device has its own power source.

type: boolean

> +
> +  # The following are optional properties for "usb-b-connector".
> +  id-gpios:
> +    description: An input gpio for USB ID pin.

maxItems: 1

> +
> +  vbus-gpios:
> +    description: An input gpio for USB VBus pin, used to detect presence of
> +      VBUS 5V. See gpio/gpio.txt.

maxItems: 1

> +
> +  vbus-supply:
> +    description: A phandle to the regulator for USB VBUS if needed when host
> +      mode or dual role mode is supported.
> +      Particularly, if use an output GPIO to control a VBUS regulator, should
> +      model it as a regulator. See regulator/fixed-regulator.yaml
> +
> +  pinctrl-names:
> +    description: A pinctrl state named "default" is optional.
> +
> +  pinctrl-0:
> +    description: Pin control group. See pinctrl/pinctrl-bindings.txt

pinctrl properties get added automatically, so you can drop these 2.

> +
> +  # The following are optional properties for "usb-c-connector".
> +  power-role:
> +    description: Determines the power role that the Type C connector will
> +      support.
> +    contains:
> +      source:
> +        description: Connector is a power source.
> +      sink:
> +        description: Connector is a power sink.
> +      dual:
> +        description: Connector is a Dual Role Port (DRP).

Not valid json-schema. Should be like this:

power-role:
  allOf:
    - $ref: /schemas/types.yaml#definitions/string
  enum:
    - source
    - sink
    - dual

> +
> +  try-power-role:
> +    description: Preferred power role.
> +    contains:
> +      sink:
> +        description: Try.SNK is preferred power role.
> +      source:
> +        description: Try.SRC is preferred power role.
> +      dual:
> +        description: DRP can support Try.SNK or Try.SRC.

Same here.

> +
> +  data-role:
> +    description: Data role if Type C connector supports USB data.
> +    contains:
> +      host:
> +        description: Connector is a host.
> +      device:
> +        description: Connector is a device.
> +      dual:
> +        description: Connector is Dual Role Device (DRD).

Similar here.

> +
> +  # The following are optional properties for "usb-c-connector" with power
> +  # delivery support.
> +  source-pdos:
> +    description: An array of u32 with each entry providing supported power
> +      source data object(PDO), the detailed bit definitions of PDO can be found
> +      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
> +      Source_Capabilities Message, the order of each entry(PDO) should follow
> +      the PD spec chapter 6.4.1. Required for power source and power dual role.
> +      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
> +      defined in dt-bindings/usb/pd.h.
> +    minItems: 1
> +    maxItems: 7
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> +
> +  sink-pdos:
> +    description: An array of u32 with each entry providing supported power sink
> +      data object(PDO), the detailed bit definitions of PDO can be found in
> +      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
> +      Sink Capabilities Message, the order of each entry(PDO) should follow the
> +      PD spec chapter 6.4.1. Required for power sink and power dual role. User
> +      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
> +      in dt-bindings/usb/pd.h.
> +    minItems: 1
> +    maxItems: 7
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> +  op-sink-microwatt:
> +    description: Sink required operating power in microwatt, if source can't
> +      offer the power, Capability Mismatch is set. Required for power sink and
> +      power dual role.
> +
> +# Any data bus to the connector should be modeled using the OF graph bindings
> +# specified in bindings/graph.txt, unless the bus is between parent node and
> +# the connector. Since single connector can have multiple data buses every bus
> +# has assigned OF graph port number as follows:
> +# 0: High Speed (HS), present in all connectors,
> +# 1: Super Speed (SS), present in SS capable connectors,
> +# 2: Sideband use (SBU), present in USB-C.

You need something like this:

ports:
  type: object
  properties:
    port@0:
      type: object
      description: High Speed (HS), present in all connectors
    ...
  required:
    - port@0

> +required:
> +  - compatible
> +
> +examples:
> +  # Micro-USB connector with HS lines routed via controller (MUIC).
> +  - |+
> +    muic-max77843@66 {
> +      usb_con1: connector {
> +        compatible = "usb-b-connector";
> +        label = "micro-USB";
> +        type = "micro";
> +      };
> +    };
> +
> +  # USB-C connector attached to CC controller (s2mm005), HS lines routed
> +  # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
> +  # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
> +  - |+
> +    ccic: s2mm005@33 {
> +      usb_con2: connector {
> +        compatible = "usb-c-connector";
> +        label = "USB-C";
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +            usb_con_hs: endpoint {
> +              remote-endpoint = <&max77865_usbc_hs>;
> +            };
> +          };
> +          port@1 {
> +            reg = <1>;
> +            usb_con_ss: endpoint {
> +            remote-endpoint = <&usbdrd_phy_ss>;
> +            };
> +          };
> +          port@2 {
> +            reg = <2>;
> +            usb_con_sbu: endpoint {
> +            remote-endpoint = <&dp_aux>;
> +            };
> +          };
> +        };
> +      };
> +    };
> +
> +  # USB-C connector attached to a typec port controller(ptn5110), which has
> +  # power delivery support and enables drp.
> +  - |+
> +    #include <dt-bindings/usb/pd.h>
> +    typec: ptn5110@50 {
> +      usb_con3: connector {
> +        compatible = "usb-c-connector";
> +        label = "USB-C";
> +        power-role = "dual";
> +        try-power-role = "sink";
> +        source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
> +        sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
> +                     PDO_VAR(5000, 12000, 2000)>;
> +        op-sink-microwatt = <10000000>;
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
> index ba2e32d500c02..60e4654297af7 100644
> --- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
> +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
> @@ -9,7 +9,7 @@ Required sub-node:
>  - connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings
>    of the connector node are specified in:
>
> -       Documentation/devicetree/bindings/connector/usb-connector.txt
> +       Documentation/devicetree/bindings/connector/usb-connector.yaml
>
>
>  Example:
> diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
> index e6790d2a4da9b..474e74c06522d 100644
> --- a/Documentation/devicetree/bindings/usb/generic.txt
> +++ b/Documentation/devicetree/bindings/usb/generic.txt
> @@ -34,7 +34,7 @@ Optional properties:
>   - usb-role-switch: boolean, indicates that the device is capable of assigning
>                         the USB data role (USB host or USB device) for a given
>                         USB connector, such as Type-C, Type-B(micro).
> -                       see connector/usb-connector.txt.
> +                       see connector/usb-connector.yaml.
>
>  This is an attribute to a USB controller such as:
>
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
> index e0ae6096f7ac8..a82ca438aec1f 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
> @@ -34,7 +34,7 @@ Optional properties:
>         dual-role mode.
>         it's considered valid for compatibility reasons, not allowed for
>         new bindings, and put into a usb-connector node.
> -       see connector/usb-connector.txt.
> +       see connector/usb-connector.yaml.
>   - pinctrl-names : a pinctrl state named "default" is optional, and need be
>         defined if auto drd switch is enabled, that means the property dr_mode
>         is set as "otg", and meanwhile the property "mediatek,enable-manual-drd"
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> index 2b8a87c90d9ea..5eedb02965622 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> @@ -23,7 +23,7 @@ Optional properties:
>                       MTCMOS
>
>  Required child nodes:
> - usb connector node as defined in bindings/connector/usb-connector.txt
> + usb connector node as defined in bindings/connector/usb-connector.yaml
>  Optional properties:
>   - id-gpios        : input GPIO for USB ID pin.
>   - vbus-gpios      : input GPIO for USB VBUS pin.
> diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
> index e3fc57e605ed6..6f8115db2ea9b 100644
> --- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
> +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
> @@ -9,7 +9,7 @@ Required properties:
>  Required sub-node:
>  - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
>    of connector node are specified in
> -  Documentation/devicetree/bindings/connector/usb-connector.txt
> +  Documentation/devicetree/bindings/connector/usb-connector.yaml
>
>  Example :
>  rt1711h@4e {
> diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
> index 25780e945b154..2bd21b22ce95b 100644
> --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
> +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
> @@ -9,7 +9,7 @@ Required sub-node:
>   - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
>     bindings of the connector node are specified in:
>
> -       Documentation/devicetree/bindings/connector/usb-connector.txt
> +       Documentation/devicetree/bindings/connector/usb-connector.yaml
>
>  Example:
>  hd3ss3220@47 {
> diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> index 0dd1469e73180..2082522b1c326 100644
> --- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> +++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> @@ -13,7 +13,7 @@ Required properties:
>  Required sub-node:
>  - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
>    of connector node are specified in
> -  Documentation/devicetree/bindings/connector/usb-connector.txt
> +  Documentation/devicetree/bindings/connector/usb-connector.yaml
>
>  Example:
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
> index 3d05ae56cb0dc..ec80641208a53 100644
> --- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
> @@ -8,11 +8,11 @@ Required properties:
>  - compatible : should include "gpio-usb-b-connector" and "usb-b-connector".
>  - id-gpios, vbus-gpios : input gpios, either one of them must be present,
>         and both can be present as well.
> -       see connector/usb-connector.txt
> +       see connector/usb-connector.yaml
>
>  Optional properties:
>  - vbus-supply : can be present if needed when supports dual role mode.
> -       see connector/usb-connector.txt
> +       see connector/usb-connector.yaml
>
>  - Sub-nodes:
>         - port : can be present.
> --
> 2.25.0.265.gbab2e86ba0-goog
>



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux