Kishon, Hanjie Lin <hanjie.lin@xxxxxxxxxxx> writes: > This patchset adds support for USB on Amlogic A1 SoCs. > > Because of my mistake I fogot to add PHY maintainer(Kishon) to mail list in > before versions, so I have to send this v8(and lateres) version again(only with dwc3 > bindings and driver patch removed). > > This patchset is composed with : > - bindings of the PHY > - bindings of the USB Control Glue(already accepted in v7) > - PHY Driver > - USB Control Glue driver(already accepted in v7) > - dts of the PHY and USB Controller > > The Amlogic A1 USB Complex is composed of : > - 1 DWC3 USB controller for USB2 Host functionality > - 1 USB2 PHY for USB2 Host functionality > > The USB Control Glue setups the clocks and the reset about DWC3 USB > controller, and binds to the USB2 PHY. It also configures the 8bit > UTMI interfaces for the USB2 PHY, including setting USB2 phy mode. > > The USB2 PHY driver initializes the phy analog settings, phy PLL > setup and phy tuning. > > This patchset is based on A1 clock/power domain/reset series at [0]. Gentle reminder ping. Once you pick up the bindings and driver (patches 1-2) I'll pick up the DT patch. Kevin
