From: Tao Ren <rentao.bupt@xxxxxxxxx>
Add USB components and according pin groups in aspeed-g6 dtsi.
Signed-off-by: Tao Ren <rentao.bupt@xxxxxxxxx>
Reviewed-by: Andrew Jeffery <andrew@xxxxxxxx>
---
Changes in v3:
- None.
Changes in v2:
- added port/endpoint properties for vhub dt node.
arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 25 +++++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 45 ++++++++++++++++++++++++
2 files changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 045ce66ca876..7028e21bdd98 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -1112,6 +1112,31 @@
groups = "UART9";
};
+ pinctrl_usb2ah_default: usb2ah_default {
+ function = "USB2AH";
+ groups = "USBA";
+ };
+
+ pinctrl_usb2ad_default: usb2ad_default {
+ function = "USB2AD";
+ groups = "USBA";
+ };
+
+ pinctrl_usb2bh_default: usb2bh_default {
+ function = "USB2BH";
+ groups = "USBB";
+ };
+
+ pinctrl_usb2bd_default: usb2bd_default {
+ function = "USB2BD";
+ groups = "USBB";
+ };
+
+ pinctrl_usb11bhid_default: usb11bhid_default {
+ function = "USB11BHID";
+ groups = "USBB";
+ };
+
pinctrl_vb_default: vb_default {
function = "VB";
groups = "VB";
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 796976d275e1..0a29b3b57a9d 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -245,6 +245,51 @@
status = "disabled";
};
+ ehci0: usb@1e6a1000 {
+ compatible = "aspeed,ast2600-ehci", "generic-ehci";
+ reg = <0x1e6a1000 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2ah_default>;
+ status = "disabled";
+ };
+
+ ehci1: usb@1e6a3000 {
+ compatible = "aspeed,ast2600-ehci", "generic-ehci";
+ reg = <0x1e6a3000 0x100>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2bh_default>;
+ status = "disabled";
+ };
+
+ uhci: usb@1e6b0000 {
+ compatible = "aspeed,ast2600-uhci", "generic-uhci";
+ reg = <0x1e6b0000 0x100>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #ports = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+ status = "disabled";
+ /*
+ * No default pinmux, it will follow EHCI, use an
+ * explicit pinmux override if EHCI is not enabled.
+ */
+ };
+
+ vhub: usb-vhub@1e6a0000 {
+ compatible = "aspeed,ast2600-usb-vhub";
+ reg = <0x1e6a0000 0x350>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+ aspeed,vhub-downstream-ports = <7>;
+ aspeed,vhub-generic-endpoints = <21>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2ad_default>;
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
--
2.17.1
