Re: [PATCH] usb: xhci-pci: Raspberry Pi FW loader for VIA VL805

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 17, 2020 at 11:07:00AM +0100, Nicolas Saenz Julienne wrote:
> On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
> loaded directly from an EEPROM or, if not present, by the SoC's
> VideCore.  Inform VideCore that VL805 was just reset, or defer xhci's
> probe if not yet joinable trough the mailbox interface.
> 
> Based on Tim Gover's downstream implementation.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> ---
>  drivers/usb/host/xhci-pci.c                | 50 ++++++++++++++++++++++
>  include/soc/bcm2835/raspberrypi-firmware.h |  2 +-
>  2 files changed, 51 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index 4917c5b033fa..eadace4a9339 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -13,6 +13,8 @@
>  #include <linux/module.h>
>  #include <linux/acpi.h>
>  
> +#include <soc/bcm2835/raspberrypi-firmware.h>

That feels really wrong :(

> +
>  #include "xhci.h"
>  #include "xhci-trace.h"
>  
> @@ -308,6 +310,44 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
>  	return xhci_pci_reinit(xhci, pdev);
>  }
>  
> +/*
> + * On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
> + * loaded directly from an EEPROM or, if not present, by the SoC's VideCore.
> + * Inform VideCore that VL805 was just reset, or defer xhci's probe if not yet
> + * joinable trough the mailbox interface.
> + */
> +static int raspberrypi_load_vl805_fw(struct pci_dev *pdev)
> +{
> +#ifdef CONFIG_RASPBERRYPI_FIRMWARE

Can you just put #ifdefs in a .h file instead please?

> +	struct device_node *fw_np;
> +	struct rpi_firmware *fw;
> +	u32 dev_addr;
> +	int ret;
> +
> +	fw_np = of_find_compatible_node(NULL, NULL,
> +					"raspberrypi,bcm2835-firmware");
> +	if (!fw_np)
> +		return 0;

So for non-rpi systems, this will work just fine, no need to #ifdef out
the whole function, right?


> +
> +	fw = rpi_firmware_get(fw_np);
> +	of_node_put(fw_np);
> +	if (!fw)
> +		return -EPROBE_DEFER;
> +
> +	dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 |
> +		   PCI_FUNC(pdev->devfn) << 12;
> +
> +	ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
> +				    &dev_addr, sizeof(dev_addr));
> +	if (ret)
> +		return ret;
> +
> +	dev_dbg(&pdev->dev, "loaded Raspberry Pi's VL805 firmware\n");
> +
> +#endif
> +	return 0;
> +}

Why not put this whole function in some rpi-platform code?

> +
>  /*
>   * We need to register our own PCI probe function (instead of the USB core's
>   * function) in order to create a second roothub under xHCI.
> @@ -321,6 +361,16 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  
>  	driver = (struct hc_driver *)id->driver_data;
>  
> +	if (dev->vendor == PCI_VENDOR_ID_VIA && dev->device == 0x3483) {
> +		retval = raspberrypi_load_vl805_fw(dev);
> +		if (retval) {
> +			if (retval != -EPROBE_DEFER)
> +				dev_err(&dev->dev,
> +					"Failed to load VL805's firmware");

Shouldn't the function print an error if there is one?

thanks,

greg k-h



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux